Mike Dobbs Posted July 17, 2020 Share Posted July 17, 2020 16 hours ago, Unventor said: So we are a few that like the gyro effect on the wheels. Some don't that is just how it is. One thing is for sure, it isn't putting me off. I just wounder why none mentioned this before. I think it wasn't mentioned because the pre-production units had a different tire- CY-666 I believe? Perhaps @Duf can chime in here since he now has a production unit with new tire? Quote Link to comment Share on other sites More sharing options...
onizukagto Posted July 17, 2020 Share Posted July 17, 2020 6 minutes ago, Duf said: You can not fill without removing the four saddle bolts up top, that allows you to push them to the side enough to get access to the valve to fill it. Unless you have the flexibly of @Patton250who has superhuman hand that could to uncap the negative chambers, fill them up without removing any screws. Quote Link to comment Share on other sites More sharing options...
Duf Posted July 17, 2020 Share Posted July 17, 2020 9 minutes ago, Mike Dobbs said: I think it wasn't mentioned because the pre-production units had a different tire- CY-666 I believe? Perhaps @Duf can chime in here since he now has a production unit with new tire? Haven't noticed a gyro effect yet but I have been going mostly in straight lines so far. 3 Quote Link to comment Share on other sites More sharing options...
stephen Posted July 17, 2020 Share Posted July 17, 2020 10 minutes ago, Duf said: Haven't noticed a gyro effect yet but I have been going mostly in straight lines so far. Lol @Duf your roads are so straight, in the UK most roads are curvy 😁 Quote Link to comment Share on other sites More sharing options...
Patton250 Posted July 17, 2020 Share Posted July 17, 2020 35 minutes ago, Duf said: You can not fill without removing the four saddle bolts up top, that allows you to push them to the side enough to get access to the valve to fill it. Hey my friend. I manage to do it without taking the saddle off. Quote Link to comment Share on other sites More sharing options...
Duf Posted July 17, 2020 Share Posted July 17, 2020 2 minutes ago, Patton250 said: Hey my friend. I manage to do it without taking the saddle off. I didn't take it off I just removed top screws to get some room. If you did it with no screws removed I would love a video because it had to be frustrating as hell. 1 Quote Link to comment Share on other sites More sharing options...
Patton250 Posted July 17, 2020 Share Posted July 17, 2020 4 minutes ago, Duf said: I didn't take it off I just removed top screws to get some room. If you did it with no screws removed I would love a video because it had to be frustrating as hell. It wasn’t fun. It took me like 10 minutes and my fingers hurt afterwards. LOL I took a picture but since you can’t upload pictures to this forum very easily I’ll have to figure out a different way later today. 3 Quote Link to comment Share on other sites More sharing options...
Popular Post VizioN-Scope Posted July 17, 2020 Popular Post Share Posted July 17, 2020 17 minutes ago, stephen said: Lol @Duf your roads are so straight, in the UK most roads are curvy 😁 Wow I like curvy. I think there are many beautiful curves in the UK 4 Quote Link to comment Share on other sites More sharing options...
Sergey Posted July 17, 2020 Share Posted July 17, 2020 2 hours ago, Jpd said: Yes please! You dont need to print such covers. Just go to the tire shop and buy cover which used for regular car tyres. Quote Link to comment Share on other sites More sharing options...
Seba Posted July 17, 2020 Share Posted July 17, 2020 2 minutes ago, VizioN-Scope said: Wow I like curvy. I think there are many beautiful curves in the UK Well... in Poland we have A LOT MORE... hmmm... curvas? And some of them are actually very beautiful... 3 Quote Link to comment Share on other sites More sharing options...
Mike Dobbs Posted July 17, 2020 Share Posted July 17, 2020 45 minutes ago, Duf said: Haven't noticed a gyro effect yet but I have been going mostly in straight lines so far. C'mon @Duf, no more Zombie riding 😄 Quote Link to comment Share on other sites More sharing options...
Unventor Posted July 17, 2020 Share Posted July 17, 2020 42 minutes ago, stephen said: Lol @Duf your roads are so straight, in the UK most roads are curvy 😁 You are talking roads now or....😉 1 Quote Link to comment Share on other sites More sharing options...
Unventor Posted July 17, 2020 Share Posted July 17, 2020 28 minutes ago, Duf said: I didn't take it off I just removed top screws to get some room. If you did it with no screws removed I would love a video because it had to be frustrating as hell. Hi @Duf, I did get to see you here in the forum as much as I hoped. But since you are here, I have yet again highlighted to my contact at Inmotion what brilliant work you have done with making content for the V11. There are 4 things that really stands out as I seen all you release (most of the multiple times too) The mode skydio shot clip. The night ride The unboxing event (I couldn't stay the hole event left at 3.30am my time) And the new production ride. All of these are just making want my wheel more and more. You have to see this in the light of I have been given loads of feedback since January until now. But those 4 videos ready stands out to me. Like you, my knees are bad even my lower back is affected. It is too bad we are not in the area as I would love to but you a cup of coffee. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Unventor Posted July 17, 2020 Popular Post Share Posted July 17, 2020 (edited) Also for those that don't follow Inmotion on telegram, Liam posted some pictures of new add-on options off-road pedals. They are starting to do jump pads development next week too. I will update this post with a copy of the pictures...hold on. Edited July 17, 2020 by Unventor Updated with pics. 16 Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted July 17, 2020 Share Posted July 17, 2020 Those pedals look neat! Don't the Inmotion pedals also fit on Gotway wheels? New option for Gotway pedals? Quote Link to comment Share on other sites More sharing options...
Popular Post Duf Posted July 17, 2020 Popular Post Share Posted July 17, 2020 1 hour ago, Unventor said: Hi @Duf, I did get to see you here in the forum as much as I hoped. But since you are here, I have yet again highlighted to my contact at Inmotion what brilliant work you have done with making content for the V11. There are 4 things that really stands out as I seen all you release (most of the multiple times too) The mode skydio shot clip. The night ride The unboxing event (I couldn't stay the hole event left at 3.30am my time) And the new production ride. All of these are just making want my wheel more and more. You have to see this in the light of I have been given loads of feedback since January until now. But those 4 videos ready stands out to me. Like you, my knees are bad even my lower back is affected. It is too bad we are not in the area as I would love to but you a cup of coffee. Thanks buddy that is very nice of you to say. Yes my time on the forums is rather sparse and that is to my detriment since there is a ton of info here that is not readily available elsewhere. I need to try to carve out more time to at least skim this forum more regularly. Glad you like the V11 content! I try my best to just present what is in front of me in a no nonsense manner. 8 Quote Link to comment Share on other sites More sharing options...
Popular Post Duf Posted July 17, 2020 Popular Post Share Posted July 17, 2020 1 hour ago, Unventor said: Also for those that don't follow Inmotion on telegram, Liam posted some pictures of new add-on options off-road pedals. They are starting to do jump pads development next week too. I will update this post with a copy of the pictures...hold on. I think this sort of a brilliant move by Inmotion, they must have been studying the One Wheel handbook. Sell a great product and then sell a bunch of accessories for it to make it even greater! 7 Quote Link to comment Share on other sites More sharing options...
Popular Post VizioN-Scope Posted July 17, 2020 Popular Post Share Posted July 17, 2020 4 Quote Link to comment Share on other sites More sharing options...
Retrovertigo Posted July 17, 2020 Share Posted July 17, 2020 So where people have found the casing to be cracked where the screws go, is there enough space to build up around the mounting point with something like araldite or even just hot glue, just to make it sturdier out of the box? Quote Link to comment Share on other sites More sharing options...
eucinsea Posted July 17, 2020 Share Posted July 17, 2020 3 hours ago, Duf said: What size are these? M4 0.7 They worked out really well, I think I had another post were I put some black duct tape on the ends to mimic the original ones. Jason at ewheels let me know they are sending out some stainless steel replacements and he would send them to me as soon as he got them. 2 Quote Link to comment Share on other sites More sharing options...
SteveO Posted July 17, 2020 Share Posted July 17, 2020 Just watched Jimmy's review and it's got me a little worried....that saddle doesnt look like its engineered properly to handle the weight of a seat and a person bouncing up and down. Unfortunately one of the main reasons I bought this was the possibility of putting a seat on....looks like I'm gonna have to see what IM does to remedy this.... Quote Link to comment Share on other sites More sharing options...
Mark Wilson Posted July 17, 2020 Share Posted July 17, 2020 9 minutes ago, SteveO said: Just watched Jimmy's review and it's got me a little worried....that saddle doesnt look like its engineered properly to handle the weight of a seat and a person bouncing up and down. Unfortunately one of the main reasons I bought this was the possibility of putting a seat on....looks like I'm gonna have to see what IM does to remedy this.... Here is the video for anyone wondering Quote Link to comment Share on other sites More sharing options...
Popular Post Duf Posted July 17, 2020 Popular Post Share Posted July 17, 2020 12 minutes ago, SteveO said: Just watched Jimmy's review and it's got me a little worried....that saddle doesnt look like its engineered properly to handle the weight of a seat and a person bouncing up and down. Unfortunately one of the main reasons I bought this was the possibility of putting a seat on....looks like I'm gonna have to see what IM does to remedy this.... Don't worry when a seat is available the majority of the weight will be supported by the handle assembly which is independent of the saddle. Also I rode with all four top screws removed last night, it doesn't affect ride-ability at all as the side mounts keep it in place. 4 Quote Link to comment Share on other sites More sharing options...
VizioN-Scope Posted July 17, 2020 Share Posted July 17, 2020 (edited) 37 minutes ago, SteveO said: Just watched Jimmy's review and it's got me a little worried....that saddle doesnt look like its engineered properly to handle the weight of a seat and a person bouncing up and down. Unfortunately one of the main reasons I bought this was the possibility of putting a seat on....looks like I'm gonna have to see what IM does to remedy this.... It looks like Jimmy is riding on a 1st batch demo wheel without the negative suspension. I'm pretty sure Inmotion knows about this saddle problem now from other customers reporting about it and so don't worry because I think this will get addressed and fixed very soon rather then later. Also the handle like @Duf said is what takes the weight of you and seat when sitting not the saddle. Edited July 17, 2020 by VizioN-Scope 1 Quote Link to comment Share on other sites More sharing options...
SteveO Posted July 17, 2020 Share Posted July 17, 2020 11 minutes ago, VizioN-Scope said: @SteveO It looks like Jimmy is riding on a 1st batch demo wheel without the negative suspension. I'm pretty sure Inmotion knows about this problem now from other customers reporting about it and So don't worry because I think this will get addressed and fixed very soon rather then later. Also the handle like @Duf said is what takes the weight of you and seat when sitting not the saddle. Great info! Thank you, that's a bit of relief as I love to ride both seated and standing! Soooo excited to get this, its gonna be my exclusive night riding wheel lol 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.