Popular Post palachzzz Posted September 1, 2018 Popular Post Share Posted September 1, 2018 1 hour ago, Mono said: For comfort it is more the height which counts, not the width. The Z6/8/10 tire is probably designed for vehicles which have suspension and a cushioned seat. Hence in the end it is not a surprise that it doesn't fit the bill well. Z - tire designed especially for Z, it is CST with "Ninebot" mark 2 2 Quote Link to comment Share on other sites More sharing options...
Nic Posted September 1, 2018 Share Posted September 1, 2018 22 minutes ago, palachzzz said: Z - tire designed especially for Z, it is CST with "Ninebot" mark I bet its not cheap to have a tyre specially made for Z series with small production run. It looks tough and built to last many thousands of miles. The lack of obvious sidewall makes it suitable to be run at low pressure without damaging the rubber through excessive flexing. A lot of thought appears to have gone into this tyre. I like it. 1 1 Quote Link to comment Share on other sites More sharing options...
justanut Posted September 2, 2018 Share Posted September 2, 2018 On 8/31/2018 at 9:43 AM, Gustesta said: if you’ve tried this “lock” you’d know it does nothing.. Any one can just switch the EUC off and back on again and the “lock” is undone.. Quote Link to comment Share on other sites More sharing options...
Ziiten Posted September 2, 2018 Share Posted September 2, 2018 What are those "Fan moments" and "Discover" options. My app does not show them, just vehicle and me. Quote Link to comment Share on other sites More sharing options...
jojo33 Posted September 2, 2018 Author Share Posted September 2, 2018 (edited) 49 minutes ago, Ziiten said: What are those "Fan moments" and "Discover" options. My app does not show them, just vehicle and me. "me"-"parameters"-"log out" close app - launch app, top right corner select other region than europe (USA), log and you ll get nfan moments and discover...etc (why ? because EU General Data Protection Regulation (GDPR) ) Edited September 2, 2018 by jojo33 2 Quote Link to comment Share on other sites More sharing options...
EZhel Posted September 3, 2018 Share Posted September 3, 2018 On 9/1/2018 at 5:05 PM, houseofjob said: Why would an EUC enthusiast want the EUC companies all to create basically the same wheel? Because for all wheel form factors, sizes and diameters, the physics laws and the human anatomy stay the same. Some design decisions work well, some don't, some turn out to be a flop. When I ride 40+ km/h on KS18L and MSuperX between pedestrians on a wide smooth road, I have zero problems with turns and breaks. Can't say that they're bad for offroad either. Then comes the wheel that makes every uphill a struggle (Monster). Does it work? Not well, Monster has a bit larger diameter than optimal to transfer the pedal pressure and make it accelerate. And then comes the wheel that makes every fast turn a struggle (the Z) and has sharp transition between super-sensitive control (<20kmh) and fighting to lean it (20+ kmh). Does it work? Nope, too wide and heavy and not enough body control. The MSuperX outer diameter, tire profile and softness is what still works, when you go bigger/wider on any part, the side effects outweight the gains, it seems. Would you like to discuss as well why all modern passenger airplanes look the same? (may be offtopic) 2 1 Quote Link to comment Share on other sites More sharing options...
Toshio Uemura Posted September 3, 2018 Share Posted September 3, 2018 (edited) 1 hour ago, EZhel said: And then comes the wheel that makes every fast turn a struggle (the Z) and has sharp transition between super-sensitive control (<20kmh) and fighting to lean it (20+ kmh). Does it work? Yes, it does! Same way you turn with a normal motorcycle ?! ? Edited September 3, 2018 by Toshio Uemura Quote Link to comment Share on other sites More sharing options...
Mono Posted September 3, 2018 Share Posted September 3, 2018 2 hours ago, EZhel said: Would you like to discuss as well why all modern passenger airplanes look the same? (may be offtopic) That's easy, it's because that's how birds look like 2 hours ago, EZhel said: Because for all wheel form factors, sizes and diameters, the physics laws and the human anatomy stay the same. Some design decisions work well, some don't, some turn out to be a flop. That's true, still I appreciate when manufacturers explore the space of possibilities and specifications. Sometimes the failure is easy to predict and could be avoided, but sometimes not. 2 Quote Link to comment Share on other sites More sharing options...
Boogieman Posted September 3, 2018 Share Posted September 3, 2018 (edited) On 9/1/2018 at 4:12 PM, Toshio Uemura said: Just one note to the “speed and range” thing: I wonder how many riders cruise over 40 km/h and over 50 km of range on a daily basis? There may be a handful, BUT if you NEED such speeds and such ranges, you might want to check for a different mode of transportation (bus!, subway!) otherwise you are statistically bound for injuries (with or without protective gear!) It’s one thing to psychologically know that you COULD go 80 km at 45+ km/h, instead of 40/50 km at 40+ km/h, but in fact most of us ACTUALLY TRAVEL 30+ for less than 60 km every day. Do we nodd?! So for me it stays a choice of which wheel gives you the most fun and satisfaction or which is more challenging or on which you feel most safe or which is best for doing tricks or which is most convenient for your transportation pattern and needs. So it is wonderful to have such a variety of wheels to choose from. I just wish there were rentals, so newbies could really try them for a while to decide before spending the big bucks. One here :-) i comute to work 17+17km. Then i ride to gf after work 7+7km and often i ride solo in between or after gf either to relax, chase zombies (walking dead lol) or just have some fun. (Charge overnight to have it rdy next day) I would say im a noob, first summer and 1200km ridden, but i am allready getting used to crusing at 45km/h and yesterday i hit speed limit three times (49km/h at 67% batt) and had to back off to prevent cut out (gotway Tesla). I certainly wouldnt mind raising the bar to 60-70km/h. I might not go therr, but i would not need to think of cutout risks around 50km/h. Of course alternative is forced tiltback with a big margin (which im not a real fan of on my ninebot mini plus as it caps the speed a lot more than needed) but then you need even more power to go in 50km/h. As i have gotten more and more used to the tesla, i just live with the eventual wobbles and jerks. As long as i dont react by jumping off, nothing happens..at least not so far. The biggest danger is other trafficants (pedestrians bicyclist specifically dont really watch out when crossing or using walk/bicycle ways (many pedestrians walk on bicycle ways and get of the bus just crossing it without even looking), which leads to many accel and brake ins and for that reason i also prefer a bit more power :-) Edited September 3, 2018 by Boogieman 1 Quote Link to comment Share on other sites More sharing options...
Mono Posted September 3, 2018 Share Posted September 3, 2018 (edited) 2 hours ago, Boogieman said: The biggest danger is other trafficants (pedestrians bicyclist specifically dont really watch out when crossing or using walk/bicycle ways (many pedestrians walk on bicycle ways and get of the bus just crossing it without even looking), which leads to many accel and brake ins and for that reason i also prefer a bit more power :-) In the legislations I am aware of, pedestrians coming off a bus have the right of way. More precisely, AFAIK, bicycles or any other vehicles are not even allowed to pass a bus on the side where passengers enter or exit, when the bus has come to a stop at a bus stop. They have to wait until the bus takes off again. Edited September 3, 2018 by Mono 1 Quote Link to comment Share on other sites More sharing options...
mrelwood Posted September 3, 2018 Share Posted September 3, 2018 2 hours ago, Boogieman said: chase zombies (walking dead lol) I hope you don’t use them for slalom. You do know the zombies have kids that might run from behind them at any time? 2 hours ago, Boogieman said: Of course alternative is forced tiltback with a big margin Msuper X luckily has a really soft tilt-back over at least 3-4km/h, I never even notice it. 16S wasn’t bad either at ~2km/h, but it was a lot easier to notice. 2 hours ago, Boogieman said: but then you need even more power to go in 50km/h. Not any more than if you’d switch to braking as fast yourself. 2 hours ago, Boogieman said: The biggest danger is other trafficants Only if you give them the power. Ride as if any bicyclist could come behind the corner without looking, and any pedestrian could jump 5 feet left or right at any time, and the danger they present becomes significantly smaller. 1 1 Quote Link to comment Share on other sites More sharing options...
Popular Post houseofjob Posted September 3, 2018 Popular Post Share Posted September 3, 2018 (edited) 10 hours ago, EZhel said: Would you like to discuss as well why all modern passenger airplanes look the same? (may be offtopic) Ummm... yeah, cuz we're very similar to airplanes Clearly you know everything there is to know about everything and are never wrong, so why bother arguing with us meek and fallible forum-goers? Edited September 3, 2018 by houseofjob 4 1 Quote Link to comment Share on other sites More sharing options...
Mono Posted September 3, 2018 Share Posted September 3, 2018 50 minutes ago, mrelwood said: any pedestrian could jump 5 feet left or right at any time +1, that's a pretty good assumption to begin with 1 Quote Link to comment Share on other sites More sharing options...
RoberAce Posted September 3, 2018 Share Posted September 3, 2018 persecution of MTB Bafang 750W against Ninebot Z10 in 360° VIdeo 2 Quote Link to comment Share on other sites More sharing options...
RoberAce Posted September 3, 2018 Share Posted September 3, 2018 8 hours ago, EZhel said: Porque para todos los factores de forma de rueda, tamaños y diámetros, las leyes físicas y la anatomía humana permanecen igual. Algunas decisiones de diseño funcionan bien, otras no, algunas resultan ser un fracaso. Cuando manejo más de 40 km / h en KS18L y MSuperX entre peatones en una carretera ancha y llana, no tengo problemas con los giros y los descansos. No puedo decir que sean malos tampoco para el campo. Luego viene la rueda que hace que cada cuesta arriba sea una lucha (Monstruo). ¿Funciona? No está bien, Monster tiene un diámetro un poco más grande que el óptimo para transferir la presión del pedal y acelerarlo. Y luego viene la rueda que hace que cada vuelta rápida sea una lucha (la Z) y tiene una transición aguda entre el control supersensible (<20 kmh) y la lucha por apoyarse (más de 20 kmh). ¿Funciona? No, demasiado ancho y pesado y no tiene suficiente control del cuerpo. El diámetro externo MSuperX, el perfil del neumático y la suavidad es lo que todavía funciona, cuando se hace más grande / más ancha en cualquier parte, los efectos secundarios superan las ganancias, al parecer. ¿Te gustaría discutir también por qué todos los aviones de pasajeros modernos tienen el mismo aspecto? (puede ser oftálmico) Bulls***t all your discussion is based on conjecture, I have my Ninebot Z10 under perfect control, it goes smooth, with a quick response, goes perfect, why come here to waste your time? 1 2 Quote Link to comment Share on other sites More sharing options...
US69 Posted September 3, 2018 Share Posted September 3, 2018 (edited) Small hint for european customers and interests in the Z10: The Wheel is now available and in stock at 1radwerkstatt. de See Commercial advertisement!!! Edited September 3, 2018 by US69 1 Quote Link to comment Share on other sites More sharing options...
Jekyll_500 Posted September 3, 2018 Share Posted September 3, 2018 As it is in stock at electro-sport.de. Ordered my Z10 and should get it tomorrow. As I am in the 200pounds league I hope it’ll be strong enough for steep climbs . I’m still satisfied with my S2 and the E+ but want more speed and power the price wasn’t much higher than the KS16-s so I thought I better stick with the known brand. 2 Quote Link to comment Share on other sites More sharing options...
RoberAce Posted September 3, 2018 Share Posted September 3, 2018 1 Quote Link to comment Share on other sites More sharing options...
Toshio Uemura Posted September 3, 2018 Share Posted September 3, 2018 1 hour ago, Jekyll_500 said: As it is in stock at electro-sport.de. Ordered my Z10 and should get it tomorrow. As I am in the 200pounds league I hope it’ll be strong enough for steep climbs . I’m still satisfied with my S2 and the E+ but want more speed and power the price wasn’t much higher than the KS16-s so I thought I better stick with the known brand. It will get you up there, don’t worry! If you loved and appreciated the E+ you will love your new Z even more (after having tamed it! ?) Congratulations!! ?? 1 Quote Link to comment Share on other sites More sharing options...
Popular Post RoberAce Posted September 4, 2018 Popular Post Share Posted September 4, 2018 https://ecodrift.ru/2018/09/03/z6-overview-english-version-first-ride-control-theory-conclusions/ Our friends from Russia EcoDrift have done a Review of the Z6, I do not agree with the conclusions drawn. On the one hand the Z does not work well to my way of understanding with a pressure of more than 2Bar (29 PSI) and I do not think it is a wheel to run exclusively on smooth asphalt. Curiously, my image appears in the report 5 Quote Link to comment Share on other sites More sharing options...
Harold Farrenkopf Posted September 4, 2018 Share Posted September 4, 2018 6 hours ago, RoberAce said: https://ecodrift.ru/2018/09/03/z6-overview-english-version-first-ride-control-theory-conclusions/ Our friends from Russia EcoDrift have done a Review of the Z6, I do not agree with the conclusions drawn. On the one hand the Z does not work well to my way of understanding with a pressure of more than 2Bar (29 PSI) and I do not think it is a wheel to run exclusively on smooth asphalt. Curiously, my image appears in the report That sure looks uncomfortable. That doesn’t happen on my V10F. Quote Link to comment Share on other sites More sharing options...
that0n3guy Posted September 4, 2018 Share Posted September 4, 2018 Just now, Harold Farrenkopf said: https://ecodrift.ru/2018/09/03/z6-overview-english-version-first-ride-control-theory-conclusions/ I agree with some of what they say. Hitting a bump at speed is far bouncier than my 18L. 2 minutes ago, Harold Farrenkopf said: That sure looks uncomfortable. That doesn’t happen on my V10F. When carving at high speed on my v10f, I liked to do similar. I would use my outside leg to brace the carve... similar (but not as extreme as the picture) to the z10... it made carving w/ the v10f more fun than carving w/ the 18L. Quote Link to comment Share on other sites More sharing options...
Nic Posted September 4, 2018 Share Posted September 4, 2018 For stability and safety, I would prefer that some effort was required to turn as I don't want to adjust my foot position when riding at speed and find that I induce a wobble that results in a fall. This is same principle as why car steering becomes stiffer the faster you go ... you don't want small mistakes to cause large problems. Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted September 4, 2018 Share Posted September 4, 2018 Quote https://ecodrift.ru/2018/09/03/z6-overview-english-version-first-ride-control-theory-conclusions/ at the end: The wheel with weight more than 20 kg shouldn’t use nominal power 51.4 V, which has to be compensated by bigger amount of copper, bigger magnets, thick wires and huge radiators. The wheels that work with nominal power 72 V and higher are more effective and light, which significantly reduce problems with carrying such wheel. Interesting that the EcoDrift guys see the Z's low voltage responsible for the high weight of the wheel. Can anybody shed some light on the technical background for this? Why do higher voltages allow using less metal? Because the currents are lower to achieve the same power? -- Here are the other EcoDrift Ninebot One Z articles if these haven't been posted before: A first look: https://translate.google.com/translate?sl=ru&tl=en&js=y&prev=_t&hl=de&ie=UTF-8&u=https%3A%2F%2Fecodrift.ru%2F2018%2F08%2F09%2Fpriehal-ninebot-z6-nachalo-ne-zaladilos%2F&edit-text= Disassembly: https://translate.google.com/translate?sl=ru&tl=en&js=y&prev=_t&hl=de&ie=UTF-8&u=https%3A%2F%2Fecodrift.ru%2F2018%2F08%2F10%2Fninebot-z6-razbiraem-izmeryaem-i-vzveshivaem%2F&edit-text= 1 Quote Link to comment Share on other sites More sharing options...
Popular Post RoberAce Posted September 4, 2018 Popular Post Share Posted September 4, 2018 (edited) develop the technique of riding with the Z 10 is not achieved in two afternoons, all those reviews written about it where the person who has rides only for a few minutes or hours to give their impressions only make a superficial judgement and base their guesses on technical data on paper that do not correspond at all with reality. Z10 requires long time to take a good idea what it is. There is nothing more exciting than Z10. Ninebot Z10 makes others boring Edited September 4, 2018 by RoberAce 5 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.