Nic Posted March 5, 2019 Share Posted March 5, 2019 (edited) A fatter wheel so that your legs are further apart would reduce wobble. Maybe even a half-moon shaped inset where your legs clamp onto the sides of the wheel would help as you could dampen out the tendency to spin around the contact patch. A fatter tyre would also help. Edited March 5, 2019 by Nic Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted March 6, 2019 Share Posted March 6, 2019 10 hours ago, Smoother said: But answer this: if wobbles are simply a matter of a strict side to side wobble then how come no one can eliminate it simply by clamping the wheel tightly between the calves? 10 hours ago, Smoother said: I don't know why clamping doesn't eliminate wobble. I'd say: Because you're already wobbling. The wheel is already going sideways (literally and figuratively). In order to stay balanced riding a EUC, you constantly and actively have to balance with your feet to negate all the tiny (or big) influences trying to make the wheel fall over sideways. So clamping does not remove wobble for the same reason simply clamping the wheel while it is falling over sideways does not keep it upright. It's too late for that. Otherwise new riders could just stay on a still wheel by grabbing it hard. Doesn't work (but who hasn't tried) You can't pull yourself up by your own bootstraps. - Not sure about your center of effort theory. I'd rather hold an "unnatural" and tense stance responsible for the appearance of wobbles then. Fo example, according to your theory, you should no longer have wobbles going uphill if you put your feet further forward (closer to your contact patch). Does that work? But who knows. And since this is not a wobble thread... Quote Link to comment Share on other sites More sharing options...
stephen Posted March 6, 2019 Share Posted March 6, 2019 I've had wobbles in different scenarios going fast i just reposition, this is my brake wobble i knew it was wobbling but never thouht it will throw me off i just don't let them bother me to much just ride them out one way or another 1 1 Quote Link to comment Share on other sites More sharing options...
Smoother Posted March 6, 2019 Share Posted March 6, 2019 (edited) 1 hour ago, meepmeepmayer said: Not sure about your center of effort theory. I'd rather hold an "unnatural" and tense stance responsible for the appearance of wobbles then. Fo example, according to your theory, you should no longer have wobbles going uphill if you put your feet further forward (closer to your contact patch). Does that work? No it doesn't help and here's why. To climb a steep hill ones feet have to be unusually far forward in order to transmit the desired amount of power into the pedals to raise your weight up the hill, or one just stops or slows to a crawl. It is because the centre of effort is so far form the contact patch (even though the contact patch has moved slightly forward) only this time its in front not behind. I'm not sure what physical law is at work here because it clearly isn't reverse castor, but it's also not a wobble it's a weave (I should have made that clear a few posts ago) but the weave is uncomfortable and gets worse the faster I go (the further forward of the contact patch I put the centre of effort. As for clamping, I have no trouble keeping the wheel upright AND clamping the hell out of it. I don't need to be dancing on the pedals all the time, to maintain balance. But no amount of clamping (and not dancing on the pedals) will stop a wobble. 52 minutes ago, stephen said: I've had wobbles in different scenarios going fast i just reposition, this is my brake wobble i knew it was wobbling but never thouht it will throw me off i just don't let them bother me to much just ride them out one way or another That is quite a severe wobble, but you only braked for less than 2 seconds. That would bother me, because I know the wheel is trying to throw me off. If you were slowing from a higher speed and having to slow to a dead stop, it probably would have got worse, or at least caused you to reduce the amount of braking force, in order to keep the wobble from amplifying, therefore increasing the braking distance over what you had intended.. I'd suggest you try it, but I don't want to be the reason you (might) come off at speed. Ps I've seen that before, even played it back a few times. That was when that person and dog walked straight out into your path. A bit of a high pucker factor moment, I'm sure. Edited March 6, 2019 by Smoother Quote Link to comment Share on other sites More sharing options...
Mike Sacristan Posted March 6, 2019 Share Posted March 6, 2019 Phew that was a scary wobble. I got a similar wobble yesterday when cruising down a light incline and then hit a few bumps and slowed down. I have 2 different ways of slowing down. 1. Squeezing the pads between my legs and sitting back or leaning back. 2. Opening my legs and letting the wheel come out in front of me. Option 1 works best for quick braking and option 2 works best for very slowly going down steep hills. Option 2 is the wobbly one for me. However... as we ride more and more we will push the threshold for wobbling further. I have tried different wobble situations as well and can minimise and reduce wobble by bending my legs a bit and carving it out. Regarding the whole speed thing. If I am in a clear area I will speed up carefully and play with the speed. I can hit 30km/h for short bursts and sometimes touch on 35km/h. For now this is enough for me. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Rik Posted March 14, 2019 Popular Post Share Posted March 14, 2019 (edited) Hi all. First post. I signed up more than a month ago, but just been reading until now, it’s time to share my learning experience. I’d never bought a EUC if I hadn’t been looking for a compact last mile solution for my EV, to overcome the last kms between charging station and destination. A folding bike or E-step being to massif, it just seemed the most compact solution to keep in the trunk. So I purchased an Inmotion V3 end of januari because its 2 wheels seemed safer for my middle-aged body and promised easier learning, which came true: 20 minutes after unboxing I was able to drive the full length of our underground parking (45m) and to make large turns. I practiced indoor every day for 2 weeks, and thanks to the tutorials in this thread, learned myself to brake, turn short and hop on/off without support (and without falling one single time), before taking my first ride on the street. Big disappointment: the lateral sloping street made driving uneasy, any crack in the asphalt unbalanced the two wheels, and finally, after crossing a cobblestone area at low speed, wobbling like a drunken sailor, the V3 overpowered and I hit the street pretty hard. Following attempts (avoiding cobblestones) didn’t improve the situation. For uneven, sloping roads, which almost all Belgian roads are, the V3 just sucks. But in between time, my mindset towards driving a EUC had entirely changed: I adore to ride it! So I started looking around, bought a used Ninebot One E+ with only 48kms last week and started practicing again. At first, I had the impression I had to start all over, balancing on 1 wheel was totally different, but after only 10 minutes I managed to stay upright, wobbling and constantly correcting left/right with my hips, but feeling happy like a kid in a candy store! As the weather conditions are bad for the moment, I continue practicing indoor, finally able to mount using the “triangle” (impossible on the V3) and enjoying the so much easier turning on 1 wheel. Day after day my “muscle memory” improves, it’s pure fun! My conclusion this far: I don’t regret having started on the V3, balancing is so much easier. It allowed me to become familiar with driving a EUC in a safe, easy, relaxed way. But the learning process levels pretty soon, due to its limited capacities. I would recommend it for starters, nothing more. I’m enjoying the E+ immensely, and will keep it in my car as a LMS as I thought to do initially, but most of all drive it daily. And once I judge my riding skills high enough, in a few months/100 kms, it will be joined by a powerful fun-machine. Can’t wait! Edited March 14, 2019 by Rik 4 3 Quote Link to comment Share on other sites More sharing options...
Smoother Posted March 14, 2019 Share Posted March 14, 2019 Well done, and welcome. You have picked a path that almost no one would have recommend, but you did it, and you're here (an EUC rider) so the result is the same. If you don't have any yet, get your protective gear sorted out before you break something, and wear it. You never know when you're going to fall. I fell on my ass today, crossing a simple step up from one level to another at no speed, after riding miles of rutted farm land in vicious cross winds with no issues. Nothing broken but my ass was sore for a few minutes. It might still be sore tomorrow. 2 Quote Link to comment Share on other sites More sharing options...
Rik Posted March 15, 2019 Share Posted March 15, 2019 Don't worry, i've got the full monty, from top to toe, even ankle protection ... Quote Link to comment Share on other sites More sharing options...
erk1024 Posted March 28, 2019 Share Posted March 28, 2019 (Still waiting for my KS18XL to arrive) There is a somewhat popular you tube guy named Hsaing. He hit a diagonal rut in the road and went down (https://www.youtube.com/watch?v=tPaMRVRW7u8). Crash happens at 9:30 in the video.The thing I noticed watching his videos during his rides is that his leg is not pressed up against the side of the EUC and at times the it looks a bit wobbly. I'm thinking that part of the reason he crashed is that his connection to the EUC is not solid, and so when he hit the bump it had an outsized effect. What do you guys think? Watching another video, it seems like when you start to lose you balance, inexperienced people try to tilt the wheel to get it back under themselves--but this is too slow. Basically when you are losing your balance to the side, your center of gravity is not directly over the wheel. If you twist, you CG is still not over the wheel, but now the wheel notices that you are tilted forward and it accelerates to get back under you. That's why twisting works better to regain balance that tilting. (Tilting is fine for turns.) I mean, for this to really work, you have to get it into your muscle memory. But at least if you *try* to do the right thing to regain balance, that process will move forward. Quote Link to comment Share on other sites More sharing options...
Smoother Posted March 28, 2019 Share Posted March 28, 2019 (edited) 15 hours ago, erk1024 said: The thing I noticed watching his videos during his rides is that his leg is not pressed up against the side of the EUC and at times the it looks a bit wobbly. I'm thinking that part of the reason he crashed is that his connection to the EUC is not solid, and so when he hit the bump it had an outsized effect. What do you guys think? I would say most experienced riders make little contact with the wheel above the feet. A death like grip on the wheel is mostly a rookie crutch to try and control severe wobble caused by lack of muscle memory. Once you know how to ride, I for one, try to have as little calf contact as possible. I even adjust my feet outwards if I feel excessive contact in that area, after mounting, etc. Clamping is also used to grain more control of the wheel over rough ground or hills, but this is "Power" control, not directional control. In my experience you cannot clamp your way out of a wobble fall. He is obviously an experienced and confident rider (Manhattan traffic, former inline skater w/tricks). Yeah, his left foot has a particularly funky placement, but he rides well. Once that wobble started, almost no one could have prevented the fall. Maybe if he wasn't holding a camera/selfie stick he might have had more use of his arms to "flap" his way out of it. Hard to say. One thing I did note; This supposed rock solid stability of the Z10, is just a myth. It may not want to lean over in fast corners, but it will wobble crash as well as the next wheel. Edited March 28, 2019 by Smoother 1 1 Quote Link to comment Share on other sites More sharing options...
RockyTop Posted March 28, 2019 Share Posted March 28, 2019 2 hours ago, Smoother said: One thing I did note; This supposed rock solid stability of the Z10, is just a myth. It may not want to lean over in fast corners, but it will wobble crash as well as the next wheel. To add to this. The Z10 is very different than other wheels. It has a very wide tire. You usually ride on the center or the tire. When the fat edge of the tire catches something it can cause unexpected strong movements. The tire also tends to bounce. Hitting something at an angle can also cause problems. This said, he had just got the wheel and was still getting used to it. 1 Quote Link to comment Share on other sites More sharing options...
Mono Posted March 28, 2019 Share Posted March 28, 2019 13 hours ago, erk1024 said: I'm thinking that part of the reason he crashed is that his connection to the EUC is not solid, and so when he hit the bump it had an outsized effect. What do you guys think? It's a somewhat weird crash and it looks more like coming from an overcorrection than from a lack of control. The street configuration doesn't look at all problematic to me, but I also don't ride the Ninebot Z10. Quote Link to comment Share on other sites More sharing options...
Smoother Posted March 28, 2019 Share Posted March 28, 2019 (edited) 5 hours ago, RockyTop said: To add to this. The Z10 is very different than other wheels. It has a very wide tire. You usually ride on the center or the tire. When the fat edge of the tire catches something it can cause unexpected strong movements. The tire also tends to bounce. Hitting something at an angle can also cause problems. This said, he had just got the wheel and was still getting used to it. I commented on this phenomenon when I did the 2.5" mod to my KS16. The desire of a wide tire to follow a raised, or lowered ridge is quite dramatic. And yes, the wider the tire the more severe the effect when riding over an uneven surface that more or less parallels one course. The solution; just like on a bike or motorcycle, is either to avoid the area, or to cross at an oblique angle (as close to 90 deg as possible). Edited March 28, 2019 by Smoother 2 Quote Link to comment Share on other sites More sharing options...
Mono Posted March 28, 2019 Share Posted March 28, 2019 3 hours ago, Smoother said: The desire of a wide tire to follow a raised, or lowered ridge is quite dramatic. Yes, but in this case the initial movement of the wheel was rather to the right, hence to the opposite than following the groove. Quote Link to comment Share on other sites More sharing options...
Smoother Posted March 28, 2019 Share Posted March 28, 2019 (edited) 10 minutes ago, Mono said: Yes, but in this case the initial movement of the wheel was rather to the right, hence to the opposite than following the groove. Well spotted. I have no idea what forces actually too place. My original statement about the fall was: 10 hours ago, Smoother said: One thing I did note; This supposed rock solid stability of the Z10, is just a myth. It may not want to lean over in fast corners, but it will wobble crash as well as the next wheel. The line following this was a response to @RockyTop s post. But you're right. In theory it should have tipped left Maybe he was at a suitably oblique angle and it was the bump it self that did him in. He wasn't exactly following the line, it was more like 45 deg., but the bottom line is a Z10 can tump the rider off despite its' "stability" Edited March 28, 2019 by Smoother Quote Link to comment Share on other sites More sharing options...
Mono Posted March 28, 2019 Share Posted March 28, 2019 I don't know about the stability, but the hopping I have seen in several vids doesn't fuel wheel control. There are also a few AFAIR similar Z10 wobble crashes on vid. 1 Quote Link to comment Share on other sites More sharing options...
erk1024 Posted March 29, 2019 Share Posted March 29, 2019 Thanks for the replies! It's hard to tell what unbalanced him. The groove he hit wasn't very deep at all. I wonder with a wide tire, if you hit a lip at a 45 degree angle and it hits the wheel on the right, if the wheel in this case wants to get rotated towards the right--unbalanced force. I don't know. But the moral is probably try to hit a groove perpendicular if possible. On a bike you always want to cross railroad tracks perpendicular. Those things are slippery! Quote Link to comment Share on other sites More sharing options...
bruno356 Posted April 12, 2019 Share Posted April 12, 2019 On 3/5/2019 at 9:33 PM, travsformation said: Hard to say, depends on a ton of factors (rider, wheel, etc.). I never got speed wobbles on the V8, the only wobbles were when going down very steep hills (feet positioning solved that). On the 18XL, I do get them. For now I push the envelope from time to time to force them upon myself and learn to deal with them. Sometimes I try to relax, sometimes I carve, sometimes I grip the wheel and sometimes I chicken out and slow down. I'm guessing time and miles will sort that out. So upgrading to a new, bigger and heavier wheel can cause speed wobbles (for some people). All the same, I just see it as part of the process. As long as one is cautious, doesn't push it beyond his skill level / comfort zone / running speed (and gears up properly!), it shouldn't be too much of an issue. Or at least, that's my experience. And when I'm doubt, ask the community (preferably after having slowed down and stepped off your wheel) Hi, could it be contributed to by the wheel actually wobbling like mine? Quote Link to comment Share on other sites More sharing options...
Jean eRide.ie Community Posted April 18, 2019 Share Posted April 18, 2019 (edited) I'm trying to find the link to a blog I found here that had lots of articles with tips, even graphical drawings, showing the correct "monkey position", carving in a straight line while breathing, and things like that. Can't find it for now. EDIT Found it, I recommend it: https://eucriding.blogspot.com/ Edited April 18, 2019 by Jean Dublin Quote Link to comment Share on other sites More sharing options...
erk1024 Posted April 22, 2019 Share Posted April 22, 2019 [I posted this question in another thread, but thought it made more sense here] Could you tell me more about "overleaning". Obviously you can lean forward too dramatically and no wheel in the world would be able to catch up. But what happens in this situation? I'm imagining the wheel trying to surge forward, which re-levels the pedals, but as the rider you fall off the front edge of the pedals because your CG is over-extended. Or does the wheel sense the situation and the motor cuts out? I think I understand the fast-speed overlean. I've seen a video where someone was going past the max speed of the wheel, the alarms were beeping like crazy. The rider had disabled tilt-back, and couldn't hear the alarms because of wind noise. Eventually the wheel couldn't keep up and the guy faceplanted off the front. But I imagine it's possible to overlean at low speeds, in which the wheel is trying to correct the out of balance, but the rider's CG is just too far out over the front. Quote Link to comment Share on other sites More sharing options...
kasenutty Posted April 22, 2019 Share Posted April 22, 2019 Overlean = Faceplant You ask for more power than it has to give, boom hit face. This applies at any speed. If you're heavy enough and try to accelerate fast enough, it will just drop you. This can happen at 0 mph and whatever the max speed is if you give it the right conditions. 1 1 Quote Link to comment Share on other sites More sharing options...
Chriull Posted April 22, 2019 Share Posted April 22, 2019 10 minutes ago, erk1024 said: Could you tell me more about "overleaning". Obviously you can lean forward too dramatically and no wheel in the world would be able to catch up. But what happens in this situation? One has a max torque over speed limit with BLDC motors. A straight line between (maximum stall torque, 0km/h) and (0 Nm, maximum no load speed). This limit line is proportionally "moving" with battery voltage. Whenever one hits this limits (asking more than this max torque at a given speed) the motor cannot supply this torque and one overleans. The lower the speed the more "asking" torque/acceleration/forward leaning is needed... More details can be found here: 2 1 Quote Link to comment Share on other sites More sharing options...
Mono Posted April 23, 2019 Share Posted April 23, 2019 4 hours ago, erk1024 said: I'm imagining the wheel trying to surge forward, which re-levels the pedals, but as the rider you fall off the front edge of the pedals because your CG is over-extended. Or does the wheel sense the situation and the motor cuts out? both may happen (though the latter should not, in particular with modern wheels), or the motor just runs out of torque. Which one happens depends on the motor power (i.e. available torque), possible current limitations, the pedal length, and the speed, because the available torque (and current) decreases linearly with increasing speed which makes riding at the speed limit particularly delicate and dangerous. 1 Quote Link to comment Share on other sites More sharing options...
mrelwood Posted April 23, 2019 Share Posted April 23, 2019 7 hours ago, erk1024 said: you fall off the front edge of the pedals because your CG is over-extended. If you are wondering about wether the pedals stays level and the rider just tips over because of a lost footing, no, that can’t quite happen on level ground. You might’ve seen extreme accelerations in videos. While the rider’s CoG is well past the front of the pedals, if the rider would start to fall off the front of the pedals, all his weight would be at the very front edge of the pedals. The only way for the wheel to stay level in general is to fight the tilt with acceleration. It wouldn’t stay upright if it would accelerate any less than what is required to catch the rider’s lean. If the wheel doesn’t have the power to accelerate fast enough, it will tilt forwards, pedals and all. This is when and how the crash by an overlean happens. Once the tilt reaches ~45 degrees, the wheel is programmed to turn off the motor. Although, by that time the rider has already fallen or bailed. Sudden obstacles are another matter though. If the wheel hits a pothole, sinks in sand etc, the speed of the wheel is reduced even if the wheel is succesful in staying upright. But there is nothing to slow down the forward leaning rider. The rider is not prepared and the ankles are loose, so the rider doesn’t get his weight on the front edge of the pedals in time. No weight = not enough acceleration, so the rider falls on his face while the wheel stays upright. 1 Quote Link to comment Share on other sites More sharing options...
Smoother Posted April 23, 2019 Share Posted April 23, 2019 5 hours ago, mrelwood said: Once the tilt reaches ~45 degrees, the wheel is programmed to turn off the motor. Although, by that time the rider has already fallen or bailed. I like your description over all, but are you sure about this part (quoted)? I know wheels shut off past 45 degrees sideways, but I have never heard of 45 degrees forward. When I watch the king songs being tested the tester does some serious braking moves and they look pretty damn close to 45 degrees. If he knew there was a cut off at 45 I'm sure he wouldn't be doing that day in day out. 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.