Dominic Winsor Posted November 26, 2020 Author Share Posted November 26, 2020 1 hour ago, Ilya Shkolnik said: Briefly about the firmware version for Sherman🤔 Veteran's don't want users to see the firmware version in our apps. I think that the EUC World developer and I need to display the firmware version in the same format. The problem is that Veteran's don't say what format they intended the version to be in. You can vote for the version format: 1053 1.053 1.0.53 1.0.5.3 4.29 Honestly, the 1053 is easy enough to use. Integers for the win. I get his point about support queries, but they have a niche product with an enthusiast community. Firmware patching should be part of the support network. 2 Quote Link to comment Share on other sites More sharing options...
craio Posted November 26, 2020 Share Posted November 26, 2020 According to Green fashion: "The number almost be updated. Actually the firmware does not be changed. They are the same." When i replied that such a thing is odd. "We have confirmed that by the Sherman manufacture. Lots of our costomer confused about it before, so we talked about it with the manufacture." Which kinda confirms the convo Ilya had. Quote Link to comment Share on other sites More sharing options...
Seba Posted November 27, 2020 Share Posted November 27, 2020 On 11/26/2020 at 10:32 AM, Ilya Shkolnik said: Veteran's don't want users to see the firmware version in our apps. I think that the EUC World developer and I need to display the firmware version in the same format. The problem is that Veteran's don't say what format they intended the version to be in. You can vote for the version format: 1053 1.053 1.0.53 1.0.5.3 4.29 Seems that 1.0.53 is the right format for firmware version. When I implemented Veteran support in EUC World, I apparently had no knowledge on how to decode/format this information. But as @Ilya Shkolnik put my attention on this thread, I checked the last document I received from Linnea and found something like this: So according to this info seems that 1053 should be displayed as 1.0.53. Another thing is that Linnea asked us to remove firmware version information from WheelLog and EUC World (and maybe from DarknessBot too, I don't know). I assume this is to eliminate requests from users wishing to update their Sherman's firmware. It's understandable from manufacturer or dealer point of view, as it will limit post sale support requests. However, our apps are independent apps created by community members for community members. This is why I would love to read what community members think about it. Should we unify the way Sherman firmware version is displayed and keep it in our apps or should we fulfil Linnea's request? 3 Quote Link to comment Share on other sites More sharing options...
Popular Post DjPanJan Posted November 27, 2020 Popular Post Share Posted November 27, 2020 1 hour ago, Seba said: Seems that 1.0.53 is the right format for firmware version. When I implemented Veteran support in EUC World, I apparently had no knowledge on how to decode/format this information. But as @Ilya Shkolnik put my attention on this thread, I checked the last document I received from Linnea and found something like this: So according to this info seems that 1053 should be displayed as 1.0.53. Another thing is that Linnea asked us to remove firmware version. This is why I would love to read what community members think about it. Should we unify the way Sherman firmware version is displayed and keep it in our apps or should we fulfil Linnea's request? For me no if veteran send you money or free EUC for testing ok remove this. If only want this because they want save money from updates is just stupid and ignore this. Potentialy you can switch this version to premium memership like golden route.  Kingsong acepted move up and down frimwares and some "Chinese woman/lady/veteran employe" want just save money/time just by hiding firmware info from users is just wrong in my eyes. What if some FW have problems how customer know if use safe FW or dangerous one. Like potencial owner sheman in future after they make pedals higher(some rumors) i definetly want know my FW version.  7 Quote Link to comment Share on other sites More sharing options...
Popular Post RockyTop Posted November 27, 2020 Popular Post Share Posted November 27, 2020 1 hour ago, Seba said: Should we unify the way Sherman firmware version is displayed and keep it in our apps or should we fulfil Linnea's request? The more info available the better. We should know what we have. 6 Quote Link to comment Share on other sites More sharing options...
Popular Post Ilya Shkolnik Posted November 27, 2020 Popular Post Share Posted November 27, 2020 In DarknessBot beta 6.1.1-302 already changed Sherman's firmware version for X.X.XXÂ format 5 Quote Link to comment Share on other sites More sharing options...
craio Posted November 27, 2020 Share Posted November 27, 2020 (edited) On 11/19/2020 at 12:29 AM, Darrell Wesh said: Is your battery charging to 100%? Mine only charges to like 97% on darknessbot. And with full battery my speed is 103kph I don't charge to full if not needed, did so this morning and EUC World showed 100% 100,3V (charger was still active, couldn't wait longer). Edited November 27, 2020 by craio Quote Link to comment Share on other sites More sharing options...
Popular Post AtlasP Posted November 27, 2020 Popular Post Share Posted November 27, 2020 You should absolutely not remove this information, and it would appear you have no obligation to do so. It's so nice to see the two app developers collaborating like this. =) 10 Quote Link to comment Share on other sites More sharing options...
Popular Post null Posted November 27, 2020 Popular Post Share Posted November 27, 2020 (edited) We should be able to know, this ridiculous stinginess about firmware needs to stop. Veteran trying to hide firmware numbers is like China digging down their crashed high speed train so it can’t be investigated. The most childish and unproductive approach to a problem. Veteran: rather than copying the worse sides of Gotway, get on with the times and make a proper OTA updatable firmware like everyone else 😓 Makes me straight up angry. Edited November 27, 2020 by null 10 Quote Link to comment Share on other sites More sharing options...
Popular Post Daley1 Posted November 28, 2020 Popular Post Share Posted November 28, 2020 Dont stop displaying firmware!. Veteran know they have a second rate system of updating via a chip.The only reason people ask for the update is the early Shermans have horrendous pedal dip that makes them just about unrideable in soft and medium mode. If they were bluetooth updateable we wouldnt have this conversation.Hiding the firmware to solve a known problem is so stupid.They should be sending an update chip to every owner without having to be asked! 4 Quote Link to comment Share on other sites More sharing options...
Popular Post travsformation Posted November 29, 2020 Popular Post Share Posted November 29, 2020 @Seba I also agree with all previous posters that this nonsense request to have FW display removed should be ignored. After all, users' preoccupation with FW version started because there were serious pedal dipping issues (= safety concerns) with the first batches that were corrected via FW... 5 Quote Link to comment Share on other sites More sharing options...
travsformation Posted November 29, 2020 Share Posted November 29, 2020 And on the subject of FW versions, mine has 4.31 (1.0.55?), I received it in early November, and I don't want to know what the pedal dip was like on the initial FWs because I already find it pretty unnerving on my FW...why on earth do the pedals dip forward when turning, bringing them even closer to the ground? Sigh... 3 Quote Link to comment Share on other sites More sharing options...
null Posted November 29, 2020 Share Posted November 29, 2020 (edited) There was also overheat hill type cable melting, which was improved via software (and later thicker cables) as well as fixes like the EUC powering on (spinning)Â when charging stopped. Edited November 29, 2020 by null 2 Quote Link to comment Share on other sites More sharing options...
craio Posted November 29, 2020 Share Posted November 29, 2020 11 hours ago, travsformation said: And on the subject of FW versions, mine has 4.31 (1.0.55?), I received it in early November, and I don't want to know what the pedal dip was like on the initial FWs because I already find it pretty unnerving on my FW...why on earth do the pedals dip forward when turning, bringing them even closer to the ground? Sigh... Odd, i got 4.29 and don't notice any pedal dip... Wonder how valid those numbers are then? 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Seba Posted November 29, 2020 Popular Post Share Posted November 29, 2020 16 hours ago, Daley1 said: Dont stop displaying firmware! I wont, I promise! 11 hours ago, travsformation said: @Seba I also agree with all previous posters that this nonsense request to have FW display removed should be ignored. After all, users' preoccupation with FW version started because there were serious pedal dipping issues (= safety concerns) with the first batches that were corrected via FW... I just wanted some user feedback as a backing for my refusal response to Veteran. 9 Quote Link to comment Share on other sites More sharing options...
Fastmike Posted December 2, 2020 Share Posted December 2, 2020 Please keep the firmware version visible! This is a big disappointment from Veteran! Total non sense mainly when you know that as an example, pedal dipping issue got solved by a firmware update! So sometimes improve safety for all! Why don't they sell those chips or at least make firmware available to all with the use of a standard adapter? 3 Quote Link to comment Share on other sites More sharing options...
zege Posted December 2, 2020 Share Posted December 2, 2020 I agree it would be great if they would be selling those chips. I think we all should have in mind that customer service and chinese companies still have some progressing left to do before it hits that mint condition super friendly state.  So aftersales of chips might be the best hope. Quote Link to comment Share on other sites More sharing options...
JimJJ Posted December 2, 2020 Share Posted December 2, 2020 Mine wont charge past 97VÂ Quote Link to comment Share on other sites More sharing options...
JimJJ Posted December 2, 2020 Share Posted December 2, 2020 On 11/18/2020 at 3:29 PM, Darrell Wesh said: Is your battery charging to 100%? Mine only charges to like 97% on darknessbot. And with full battery my speed is 103kph Mine does the same with the latest firmware 4.32Â 1 Quote Link to comment Share on other sites More sharing options...
Darrell Wesh Posted December 2, 2020 Share Posted December 2, 2020 1 hour ago, JimJJ said: Mine wont charge past 97V 97% or 97v? That’s not good if you’re at 97v and the charger is green.... my battery says 97% but voltage is at 100 volts Quote Link to comment Share on other sites More sharing options...
JimJJ Posted December 3, 2020 Share Posted December 3, 2020 (edited) 5 hours ago, Darrell Wesh said: 97% or 97v? That’s not good if you’re at 97v and the charger is green.... my battery says 97% but voltage is at 100 volts 5 hours ago, Darrell Wesh said: 97% or 97v? That’s not good if you’re at 97v and the charger is green.... my battery says 97% but voltage is at 100 volts I meant 95% and 99.7 v lol sorry Edited December 3, 2020 by JimJJ Quote Link to comment Share on other sites More sharing options...
JimJJ Posted December 3, 2020 Share Posted December 3, 2020 5 hours ago, Darrell Wesh said: 97% or 97v? That’s not good if you’re at 97v and the charger is green.... my battery says 97% but voltage is at 100 volts I meant darknessbot show 96% and 99.70v Quote Link to comment Share on other sites More sharing options...
Darrell Wesh Posted December 3, 2020 Share Posted December 3, 2020 50 minutes ago, JimJJ said: I meant darknessbot show 96% and 99.70v That’s good. Nothing wrong with it. Batteries partially discharge once they hit 100% anyway 1 Quote Link to comment Share on other sites More sharing options...
RockyTop Posted December 3, 2020 Share Posted December 3, 2020 I was told that when you plug in your Veteran to change it turns the wheel on but does not balance. Then when you Unplug It or when it finishes charging or when the power goes out, it starts trying to balance. Is this true. If so I missed this information. Has this been fixed in software or is it not seen as a problem?  Please correct me if I am wrong about a detail.  I have not seen this first hand.  Quote Link to comment Share on other sites More sharing options...
craio Posted December 3, 2020 Share Posted December 3, 2020 15 minutes ago, RockyTop said: I was told that when you plug in your Veteran to change it turns the wheel on but does not balance. Then when you Unplug It or when it finishes charging or when the power goes out, it starts trying to balance. Is this true. If so I missed this information. Has this been fixed in software or is it not seen as a problem?  Please correct me if I am wrong about a detail.  I have not seen this first hand.  It indeed turns on without balancing when a charger is plugged in (the rearlight also turns on).When i unplug the charger the display shows 'off' and the sherman turns off. 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.