stephen Posted June 29, 2020 Share Posted June 29, 2020 1 hour ago, onizukagto said: haha. third parties are already thinking of seat accessories, before inmotion gets on it. Hope they come up with a good seat the V11 seems like a good seat rider, just like the old high kingsong 18,, I'll be putting some sort of foam on the top for lean pads just so it's comfy on my legs 👍 1 Quote Link to comment Share on other sites More sharing options...
onizukagto Posted June 29, 2020 Share Posted June 29, 2020 2 hours ago, stephen said: Hope they come up with a good seat the V11 seems like a good seat rider, just like the old high kingsong 18,, I'll be putting some sort of foam on the top for lean pads just so it's comfy on my legs 👍 kinda curious why you want to put pads on the top? I mean, the ”saddle” part on the top is padding, so essentially you putting more padding on top of padding? (paddingception?!) Quote Link to comment Share on other sites More sharing options...
stephen Posted June 29, 2020 Share Posted June 29, 2020 1 hour ago, onizukagto said: kinda curious why you want to put pads on the top? I mean, the ”saddle” part on the top is padding, so essentially you putting more padding on top of padding? (paddingception?!) Not for more padding,,,, more at each end of the padding for better leverage so it's got a more prominent curve to push against for accelerating and braking 2 Quote Link to comment Share on other sites More sharing options...
onizukagto Posted June 29, 2020 Share Posted June 29, 2020 hmmm... OK. I've seen the emergence breaking technique for EUC, by gripping the wheel tightly between your legs and kinda do a little twist backwards. But honestly don't think that's required unless you are riding above 40km/h. While it seems like the v11 is quite torque-ky, it reminds to be seen how quick it can go under real world riding condition. Quote Link to comment Share on other sites More sharing options...
Zopper Posted June 29, 2020 Share Posted June 29, 2020 1 hour ago, onizukagto said: hmmm... OK. I've seen the emergence breaking technique for EUC, by gripping the wheel tightly between your legs and kinda do a little twist backwards. But honestly don't think that's required unless you are riding above 40km/h. While it seems like the v11 is quite torque-ky, it reminds to be seen how quick it can go under real world riding condition. I disagree. Emergency braking is important at all speeds. Even when you are cruising "slowly" at 20 km/h, something can suddenly appear in front of you (a kid running out from behind a bush, a driver that didn't look around...) And then you need to stop or at least shed the speed as quick as possible - don't forget you have an almost-30-kg heavy ankle breaker . The twist brings a risk of turning into something, so anything that allows for a better transfer of weight backwards helps. 3 Quote Link to comment Share on other sites More sharing options...
Popular Post stephen Posted June 29, 2020 Popular Post Share Posted June 29, 2020 (edited) V11 upgrades and changes so far 👍👍 i didn't know they have changed the pedal angle as well as raised it slightly 😊 That's great Edited June 29, 2020 by stephen 10 Quote Link to comment Share on other sites More sharing options...
Popular Post ir_fuel Posted June 29, 2020 Popular Post Share Posted June 29, 2020 I don't like the looks, but they sure seem to have made an impressive product. 6 Quote Link to comment Share on other sites More sharing options...
Popular Post Unventor Posted June 29, 2020 Popular Post Share Posted June 29, 2020 And a few moments ago Liam confirmed first batch ships with CYT C1488 tire. I am not a tire specialist so I don't know if this is good or bad. But it is a tire used on many wheels. 4 Quote Link to comment Share on other sites More sharing options...
Popular Post Unventor Posted June 29, 2020 Popular Post Share Posted June 29, 2020 5 minutes ago, ir_fuel said: I don't like the looks, but they sure seem to have made an impressive product. This is a bit funny as I think it is pretty cool looking. But I guess that is how it works with many things fortunately 😉. @stephen thanks for sharing the pictures. 4 Quote Link to comment Share on other sites More sharing options...
stephen Posted June 29, 2020 Share Posted June 29, 2020 5 minutes ago, Unventor said: And a few moments ago Liam confirmed first batch ships with CYT C1488 tire. I am not a tire specialist so I don't know if this is good or bad. But it is a tire used on many wheels. I'll try look for a picture of it to add to the photos👍 I have a brand new h666 tyre i got for the msx i wonder if that would fit and how much of a pain it is to change if needed 😬 2 Quote Link to comment Share on other sites More sharing options...
ir_fuel Posted June 29, 2020 Share Posted June 29, 2020 Maybe I need to see one IRL first 2 Quote Link to comment Share on other sites More sharing options...
stephen Posted June 29, 2020 Share Posted June 29, 2020 Just now, ir_fuel said: Maybe I need to see one IRL first I can't wait to see mine IRL 😊 i also like the look ,dang!😁 them lights Mmmm 3 Quote Link to comment Share on other sites More sharing options...
Unventor Posted June 29, 2020 Share Posted June 29, 2020 1 minute ago, stephen said: I'll try look for a picture of it to add to the photos👍 I have a brand new h666 tyre i got for the msx i wonder if that would fit and how much of a pain it is to change if needed 😬 I have save a spot primetime and the following day, on my tv for your video 2 Quote Link to comment Share on other sites More sharing options...
ir_fuel Posted June 29, 2020 Share Posted June 29, 2020 Just now, stephen said: I can't wait to see mine IRL 😊 i also like the look ,dang!😁 them lights Mmmm Should be a good fit for me apparently. Except for the MSX, your EUC list is the same as mine 1 Quote Link to comment Share on other sites More sharing options...
Unventor Posted June 29, 2020 Share Posted June 29, 2020 2 minutes ago, ir_fuel said: Maybe I need to see one IRL first Well word was first wheels were to ship out this week. 2 Quote Link to comment Share on other sites More sharing options...
Popular Post meepmeepmayer Posted June 29, 2020 Popular Post Share Posted June 29, 2020 New @EcoDrift article shows the latest state of the V11 (and S18). Not sure if all of this is already known here, but it's a good overview of the improvements they made. https://www.translatetheweb.com/?from=ru&to=en&dl=de&ref=trb&a=https%3A%2F%2Fecodrift.ru%2F2020%2F06%2F29%2Fnovosti-o-monokolesah-s-podveskoj-muki-ozhidaniya%2F 5 Quote Link to comment Share on other sites More sharing options...
mrelwood Posted June 29, 2020 Share Posted June 29, 2020 4 minutes ago, stephen said: I have a brand new h666 tyre i got for the msx i wonder if that would fit and how much of a pain it is to change if needed 😬 It will fit! Inmotion tested the H-666 on the V11 extensively, but as far as I know they didn’t like the turning/carving behavior as much. 2 Quote Link to comment Share on other sites More sharing options...
stephen Posted June 29, 2020 Share Posted June 29, 2020 9 minutes ago, Unventor said: I have save a spot primetime and the following day, on my tv for your video I'll be doing a first ride never ridden video to get my first initial impressions 😁👍 7 minutes ago, meepmeepmayer said: New @EcoDrift article shows the latest state of the V11 (and S18). Not sure if all of this is already known here, but it's a good overview of the improvements they made. https://www.translatetheweb.com/?from=ru&to=en&dl=de&ref=trb&a=https%3A%2F%2Fecodrift.ru%2F2020%2F06%2F29%2Fnovosti-o-monokolesah-s-podveskoj-muki-ozhidaniya%2F Some good written info there i like looking at pictures to😁😊 6 minutes ago, mrelwood said: It will fit! Inmotion tested the H-666 on the V11 extensively, but as far as I know they didn’t like the turning/carving behavior as much. Oooh that's good then i might not install it on my msx yet not that i ever got to do it and I've had it months maybe 6 lol😂 Quote Link to comment Share on other sites More sharing options...
stephen Posted June 29, 2020 Share Posted June 29, 2020 15 minutes ago, mrelwood said: It will fit! Inmotion tested the H-666 on the V11 extensively, but as far as I know they didn’t like the turning/carving behavior as much. You liked that tyre @mrelwood have you got a pic of the CYT C1488 i can't find it ,, i know your good with tyres😁👍 Quote Link to comment Share on other sites More sharing options...
Gasmantle Posted June 29, 2020 Share Posted June 29, 2020 1 hour ago, ir_fuel said: I don't like the looks, but they sure seem to have made an impressive product. I thought I was the only one who thought it is butt ugly, to me it looks like a wardrobe on a wheel. I much prefer the look of the S18 but that wheel loses on it's range potential. 1 Quote Link to comment Share on other sites More sharing options...
stephen Posted June 29, 2020 Share Posted June 29, 2020 55 minutes ago, Gasmantle said: I thought I was the only one who thought it is butt ugly, to me it looks like a wardrobe on a wheel. I much prefer the look of the S18 but that wheel loses on it's range potential. If i was going for looks it would be the s18 but for range and torque and quality build its got to be the V11 2 Quote Link to comment Share on other sites More sharing options...
Gasmantle Posted June 29, 2020 Share Posted June 29, 2020 14 minutes ago, stephen said: If i was going for looks it would be the s18 but for range and torque and quality build its got to be the V11 Yea it seems like the S18 has a few niggly little faults, it kinda looks like their quality control isn't great. 2 Quote Link to comment Share on other sites More sharing options...
Unventor Posted June 29, 2020 Share Posted June 29, 2020 (edited) 2 hours ago, stephen said: You liked that tyre @mrelwood have you got a pic of the CYT C1488 i can't find it ,, i know your good with tyres😁👍 That is the understatement of the century. He is Guru God of Tires. And author of the excel file in downloads to assist find tire pressure that might suit you. Edited June 29, 2020 by Unventor 3 Quote Link to comment Share on other sites More sharing options...
Gasmantle Posted June 29, 2020 Share Posted June 29, 2020 2 minutes ago, Unventor said: That is the understatement of the century. He is Guru God of Tires. Quote Link to comment Share on other sites More sharing options...
Unventor Posted June 29, 2020 Share Posted June 29, 2020 Just now, Gasmantle said: That got my waistline.... @mrelwood is much more EUC friendly shaped. 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.