Sketch Posted July 10, 2019 Share Posted July 10, 2019 1 minute ago, zenleetech said: so is this supposed to come with manual, i have no idea what to do now! Long press the silver button to turn on. Watching your live stream. Quote Link to comment Share on other sites More sharing options...
Sketch Posted July 10, 2019 Share Posted July 10, 2019 (edited) 5 minutes ago, zenleetech said: so is this supposed to come with manual, i have no idea what to do now! You better pad that Nikola up good before trying to ride it. You’re gong to scratch it up good trying to learn if not. go to YouTube and check out some EUC learning videos. @Kuji Rolls just put out a good one. Edited July 10, 2019 by Sketch Quote Link to comment Share on other sites More sharing options...
Marty Backe Posted July 10, 2019 Share Posted July 10, 2019 (edited) 8 minutes ago, zenleetech said: so is this supposed to come with manual, i have no idea what to do now! EWheels usually provides an e-mail with some detail information about your wheel, such as the app to use, etc. And there is a manual in the box. Edited July 10, 2019 by Marty Backe Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted July 10, 2019 Share Posted July 10, 2019 You need to pump up your tire! Minimum tire pressure won't work and might give you a flat. Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted July 10, 2019 Share Posted July 10, 2019 Inside it's ok. (Sorry for using this as a chat box) Quote Link to comment Share on other sites More sharing options...
Lucas Alexander Oliver Posted July 10, 2019 Share Posted July 10, 2019 1 hour ago, zenleetech said: so is this supposed to come with manual, i have no idea what to do now! Wow bud. Be careful. And really take people’s advice and wrap the crap out of your beautiful nikola you’re going to drop it a lot trying to learn. Good wrist protection is the most important safety gear imho enjoy owning the most comfortable wheel available 1 Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted July 10, 2019 Share Posted July 10, 2019 @zenleetech That was cool, thanks! I'm going to watch the start, only saw the last bit. Pad up the wheel everywhere it might hit. Including the top sides, undersides of pedals, and even the undersides of the pedal hangers. And wear at least wrist guards while riding. Two things you might otherwise regret not doing 1 Quote Link to comment Share on other sites More sharing options...
zenleetech Posted July 10, 2019 Share Posted July 10, 2019 thanks! need some more tape! Also got a email from ewheels informing that they will be sending out new boards with instructions on how to install. Should I just burn this one up b4 putting in the new one? Quote Link to comment Share on other sites More sharing options...
Kens Posted July 10, 2019 Share Posted July 10, 2019 (edited) 2 minutes ago, zenleetech said: thanks! need some more tape! Also got a email from ewheels informing that they will be sending out new boards with instructions on how to install. Should I just burn this one up b4 putting in the new one? Nuuuuuuuuuuuuuuuuuuu..... Keep it as a spare!!! Edited July 10, 2019 by Kens Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted July 10, 2019 Share Posted July 10, 2019 2 minutes ago, zenleetech said: Also got a email from ewheels informing that they will be sending out new boards with instructions on how to install. Why is he sending out wheels with boards that need replacement??? Did his evil clone take over or something? This is a $2000 wheel and he just let's the customers do the repair? 2 minutes ago, zenleetech said: Should I just burn this one up b4 putting in the new one? Not sure what is best now. Wait or hope fot the best... You could have a look at the board. Maybe you already got a new one (big mosfets) and that was just a generic email? 1 Quote Link to comment Share on other sites More sharing options...
Rywokast Posted July 10, 2019 Share Posted July 10, 2019 (edited) although it may be a generic email i would highly advise taking off the left side panel to make sure.. just take a pic of the board and post it here.. if you were to burn that board as you say, and it were to blow a mos you would do a faceplant, and the wheel would immediately plummet into the ground damaging your new wheel Edited July 10, 2019 by Rywokast 2 Quote Link to comment Share on other sites More sharing options...
Marty Backe Posted July 10, 2019 Share Posted July 10, 2019 4 minutes ago, Rywokast said: although it may be a generic email i would highly advise taking off the left side panel to make sure.. just take a pic of the board and post it here.. if you were to burn that board as you say, and it were to blow a mos you would do a faceplant, and the wheel would immediately plummet into the ground damaging your new wheel I already provided information on how to check, and I think with a strong flashlight he can look for the presence of a particular connector via the translucent shell. 1 Quote Link to comment Share on other sites More sharing options...
Lucas Alexander Oliver Posted July 10, 2019 Share Posted July 10, 2019 I just got this notification today so I’m assuming I’ll be receiving my new board . .. not sure when I’ll be putting it in though.. this is my most recent DarknessBot snapshot. With my wheel running this good I would be scared my new one wouldn’t work or something . Quote Link to comment Share on other sites More sharing options...
Rywokast Posted July 10, 2019 Share Posted July 10, 2019 2 minutes ago, Marty Backe said: I already provided information on how to check, and I think with a strong flashlight he can look for the presence of a particular connector via the translucent shell. oh thats a good idea, hopefully it will work,, much better than having to take the panel off 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Rehab1 Posted July 10, 2019 Popular Post Share Posted July 10, 2019 (edited) I’m sure I’ll receive numerous negative reps for this comment (I could care less) but why the hell are people disparaging Jason? Remember just a few short weeks ago when the Nikola seemed to represent the best performing wheel ever produced by GW. Then came the ‘Overheat Hill’ test which quickly demoralized everyone’s hopes- that the perfect wheel for all riding conditions was a failure. I would hate to be in Jason’s shoes sitting on inventory that has been verbally trashed. Edited July 10, 2019 by Rehab1 5 Quote Link to comment Share on other sites More sharing options...
wheelr Posted July 11, 2019 Share Posted July 11, 2019 1 hour ago, Rywokast said: although it may be a generic email i would highly advise taking off the left side panel to make sure.. just take a pic of the board and post it here.. if you were to burn that board as you say, and it were to blow a mos you would do a faceplant, and the wheel would immediately plummet into the ground damaging your new wheel And probably send him to the emergency room. 1 Quote Link to comment Share on other sites More sharing options...
zenleetech Posted July 11, 2019 Share Posted July 11, 2019 (edited) anyone have manual or guide for the nikola? someone said the tire pressure could be seen from the outside of nikola, but I have it all taped up so, probably can't see it. where would it be located at? also not quite sure how to fill up the tire atm. Edited July 11, 2019 by zenleetech Quote Link to comment Share on other sites More sharing options...
Marty Backe Posted July 11, 2019 Share Posted July 11, 2019 3 minutes ago, zenleetech said: anyone have manual or guide for the nikola? someone said the tire pressure could be seen from the outside of nikola, but I have it all taped up so, probably can't see it. where would it be located at? The tire pressure is listed on the side of the tire. All tires list the nominal pressure range. The manual didn't come in the box? You sure? It includes the QC info which has the manufacture date. It's good to have - worth mentioning to EWheels if they didn't put it back in the box for you. Quote Link to comment Share on other sites More sharing options...
Rywokast Posted July 11, 2019 Share Posted July 11, 2019 (edited) 8 minutes ago, zenleetech said: anyone have manual or guide for the nikola? someone said the tire pressure could be seen from the outside of nikola, but I have it all taped up so, probably can't see it. where would it be located at? there is no such thing as a true manual for 99% of all EUCs.. (think ninebot and inmotion sometimes have decent ones) best you can hope for is some three page thing in chinese with some basic specs and safety warnings.. what are you trying to figure out? this should cover most questions, anything else ask here. use a pressure gauge like that or preferably a pump with one so you know as youre pumping lol.. the recommended is on the side of the tire Edited July 11, 2019 by Rywokast 1 Quote Link to comment Share on other sites More sharing options...
zenleetech Posted July 11, 2019 Share Posted July 11, 2019 @Marty Backe no manual, opened it on livestream and looked all over for it. I'll mention it to them. Quote Link to comment Share on other sites More sharing options...
zenleetech Posted July 11, 2019 Share Posted July 11, 2019 @Rywokast I did get a lil pamphlet, it's all in Chinese, must be the manual. Inside the manual is a barcode with my motorcode etc. Quote Link to comment Share on other sites More sharing options...
Rywokast Posted July 11, 2019 Share Posted July 11, 2019 7 minutes ago, Marty Backe said: The tire pressure is listed on the side of the tire. All tires list the nominal pressure range. The manual didn't come in the box? You sure? It includes the QC info which has the manufacture date. It's good to have - worth mentioning to EWheels if they didn't put it back in the box for you. doesnt that info usually come on the tag? or is that just kingsong, cant remember lol Quote Link to comment Share on other sites More sharing options...
Rywokast Posted July 11, 2019 Share Posted July 11, 2019 1 minute ago, zenleetech said: @Rywokast I did get a lil pamphlet, it's all in Chinese, must be the manual. Inside the manual is a barcode with my motorcode etc. yup.. thats what passes as a manual in the euc world.. the rest is up to us to figure out usually lol 1 1 Quote Link to comment Share on other sites More sharing options...
zenleetech Posted July 11, 2019 Share Posted July 11, 2019 Not sure how to fill up the tire, going to go thru @Marty Backe 's videos and see if I can find out how. I'm such a noob. Quote Link to comment Share on other sites More sharing options...
Rywokast Posted July 11, 2019 Share Posted July 11, 2019 (edited) 3 minutes ago, zenleetech said: Not sure how to fill up the tire, going to go thru @Marty Backe 's videos and see if I can find out how. I'm such a noob. spin the tire around youll see the valve, it can be hard to spot this will usually make life easier https://www.amazon.com/Extension-Adaptor-Extender-Inflation-Motorcycle/dp/B07GT4WNG9/ref=sr_1_73?keywords=valve+extender&qid=1562808860&s=gateway&sr=8-73 Edited July 11, 2019 by Rywokast Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.