xorbe Posted August 14, 2020 Share Posted August 14, 2020 I wonder if that sort of pad, if placed fore and aft of the foot, would have helped keep Hsaing on his V11 avoiding EUC destruction. Quote Link to comment Share on other sites More sharing options...
EMA Posted August 15, 2020 Share Posted August 15, 2020 14 hours ago, xorbe said: I wonder if that sort of pad, if placed fore and aft of the foot, would have helped keep Hsaing on his V11 avoiding EUC destruction. probably yes, you'll never lose a pedal with these attached file for those who want to test them, any feedback would be nice pad_left.stl pad_right.stl 2 Quote Link to comment Share on other sites More sharing options...
Bhala Posted August 15, 2020 Share Posted August 15, 2020 5 hours ago, EMA said: probably yes, you'll never lose a pedal with these attached file for those who want to test them, any feedback would be nice pad_left.stl 492.76 kB · 1 download pad_right.stl 492.76 kB · 2 downloads Are these printable? How do I go about it? Quote Link to comment Share on other sites More sharing options...
EMA Posted August 15, 2020 Share Posted August 15, 2020 2 minutes ago, Bhala said: Are these printable? How do I go about it? 3d print them and put some foam on them Quote Link to comment Share on other sites More sharing options...
Bhala Posted August 15, 2020 Share Posted August 15, 2020 Im really noob here. What kind of 3-d printer would I buy for this? And what material to print in? Is it only 900 usd and Im good to go? LOL.. Quote Link to comment Share on other sites More sharing options...
HippoPig Posted August 15, 2020 Share Posted August 15, 2020 13 hours ago, EMA said: probably yes, you'll never lose a pedal with these attached file for those who want to test them, any feedback would be nice pad_left.stl 492.76 kB · 6 downloads pad_right.stl 492.76 kB · 5 downloads I may give these a go on the Sherman. Ive been planning to do basically this so thanks 1 Quote Link to comment Share on other sites More sharing options...
Aleksandr Dolgov Posted August 15, 2020 Share Posted August 15, 2020 i wouldnt use hard plastics for this, u can destroy not only outer body but the electronics as well after a hard side hit. maybe it would be better just cut it from dense eva sheets and glue togeter. tpu filaments are pricey af and big parts like this print very long... Quote Link to comment Share on other sites More sharing options...
EMA Posted August 16, 2020 Share Posted August 16, 2020 9 hours ago, Aleksandr Dolgov said: i wouldnt use hard plastics for this, u can destroy not only outer body but the electronics as well after a hard side hit. maybe it would be better just cut it from dense eva sheets and glue togeter. tpu filaments are pricey af and big parts like this print very long... 0.28 layer printing is not so long, i tried in tpu first (3h) but this kind of plastic do not work well with the double side tape 2h printing in simple pla and you're ready to go, tape is so strong. i don't think you should worry about crash but i've put others photos on fb group so you can make your own idea 1 Quote Link to comment Share on other sites More sharing options...
HippoPig Posted August 16, 2020 Share Posted August 16, 2020 On 8/15/2020 at 8:10 AM, EMA said: probably yes, you'll never lose a pedal with these attached file for those who want to test them, any feedback would be nice pad_left.stl 492.76 kB · 12 downloads pad_right.stl 492.76 kB · 10 downloads What sort of material and infill would you recommend? Only had a quote in PETG in whatever infill I want. Quote Link to comment Share on other sites More sharing options...
Aleksandr Dolgov Posted August 16, 2020 Share Posted August 16, 2020 3 hours ago, EMA said: 0.28 layer printing is not so long, i tried in tpu first (3h) but this kind of plastic do not work well with the double side tape 2h printing in simple pla and you're ready to go, tape is so strong. i don't think you should worry about crash but i've put others photos on fb group so you can make your own idea tpu require slow speeds with bowden type especially i already have a dent on one of the big capacitors. of course, it is up to u what to use on your euc 1 Quote Link to comment Share on other sites More sharing options...
Lars Heeneman Posted August 17, 2020 Share Posted August 17, 2020 On 8/16/2020 at 10:21 AM, EMA said: 0.28 layer printing is not so long, i tried in tpu first (3h) but this kind of plastic do not work well with the double side tape 2h printing in simple pla and you're ready to go, tape is so strong. i don't think you should worry about crash but i've put others photos on fb group so you can make your own idea how are you printing it in 2 hours :o how much infill % did you put it at? i'm doing a test print now with PLA at 60mm/s and 25% infill. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Wookz Posted August 17, 2020 Popular Post Share Posted August 17, 2020 Apparently new MSP'S come with the monster pro pedals. I just got my msp2k from ewheels and at first I thought they didn't put the Nikola pedals on but Jason informed me they were the new monster pro pedals. They're 10" in length so I think he's right. The angle feels pretty good. 4 Quote Link to comment Share on other sites More sharing options...
EMA Posted August 17, 2020 Share Posted August 17, 2020 (edited) 3 hours ago, Lars Heeneman said: how are you printing it in 2 hours how much infill % did you put it at? i'm doing a test print now with PLA at 60mm/s and 25% infill. 3 walls, 8-10 infill and you're good, it's a super simple piece, you can print it fast Edited August 17, 2020 by EMA Quote Link to comment Share on other sites More sharing options...
EMA Posted August 17, 2020 Share Posted August 17, 2020 22 minutes ago, Wookz said: Apparently new MSP'S come with the monster pro pedals. I just got my msp2k from ewheels and at first I thought they didn't put the Nikola pedals on but Jason informed me they were the new monster pro pedals. They're 10" in length so I think he's right. The angle feels pretty good. can you take some pictures close to a monster/nikola pedal ? if you have one of course i know they are bigger but picture is always better, btw (GW says 22.8-10.8 cm) Quote Link to comment Share on other sites More sharing options...
RagingGrandpa Posted August 17, 2020 Share Posted August 17, 2020 15 minutes ago, EMA said: can you take some pictures close to a monster/nikola pedal ? On 6/24/2020 at 6:15 AM, EMA said: new pics, including the new bigger pedals 1 Quote Link to comment Share on other sites More sharing options...
Wookz Posted August 17, 2020 Share Posted August 17, 2020 2 hours ago, EMA said: can you take some pictures close to a monster/nikola pedal ? if you have one of course i know they are bigger but picture is always better, btw (GW says 22.8-10.8 cm) Dont have those available atm. Quote Link to comment Share on other sites More sharing options...
Lars Heeneman Posted August 17, 2020 Share Posted August 17, 2020 On 8/15/2020 at 9:10 AM, EMA said: probably yes, you'll never lose a pedal with these attached file for those who want to test them, any feedback would be nice pad_left.stl 492.76 kB · 18 downloads pad_right.stl 492.76 kB · 14 downloads i have printed a set today, haven't tried them yet but they look super nice! 3 Quote Link to comment Share on other sites More sharing options...
EMA Posted August 17, 2020 Share Posted August 17, 2020 Coming back from group ride i've done this, post pic later 1 Quote Link to comment Share on other sites More sharing options...
EUC Custom Power-Pads Posted August 18, 2020 Share Posted August 18, 2020 17 hours ago, Wookz said: The angle feels pretty good. I have also ordered the MSP with these pedals and am still waiting for delivery. Can you measure the angle? Looks like they finally got rid of that nasty 16 degree angle. 16 hours ago, EMA said: i know they are bigger but picture is always better, btw (GW says 22.8-10.8 cm) I got a bad picture, but one can see that it is 22,8 cm (9 inch) and not 25,4 cm (10 inch) 1 Quote Link to comment Share on other sites More sharing options...
Popular Post DjPanJan Posted August 18, 2020 Popular Post Share Posted August 18, 2020 (edited) Some images i try optimize my MSP. All solutions is temporary. I looking for best positions powerpads and decide if use griptape on nylonove or keep it original. Electrical tape is here to protect again dust ingress i want keep pedals inside clean for beter grip griptape glue in future. Maybee i keep griptape and open holes this be later project. Experimenting with doublesided tapes to hold powerpads on euc bodyguard good ,this wil be long run. I hide this ugly ports under neoprene piece and this add damage/waterproofing power button littlebit. I hope weights keep long on rim 12gram on oposite side valve. This make ride smoother. Experimenting with riding modes continues and i no have final result about pulsating i feel when is smooth surface or ride longer inclines. Powerpads keep original 3M tape i cut botom side with scittors and keep top side to protect agains dust etc. Ride PSI 35-40 still i loking for optimal nimble vs confort PSI. Light is covered half aluminium foil and electric tape because i have police stop me and force me to off frontlight or pay ticket for overblind people and force me next day to police station show how i fix this if i no want pay tricket i agree then . Police man inform me they can take/confiscate my EUC for investigation for 60days because this gotway EUC is not EU road compliant device. Today i be on local police station proof i make fix this problem. Im not hero beter is cooperate with local coops. They meet me often in our city and i no want be focused person for rest of my EUC time here. Under EUC bodyguard is 5mm neoprene foam what cover all side panels for confort my ankles. Original pad gotway is removed now. This chinese powerpad is relatively hard and slipery maybee i put neoprene over powerpad. Con is neoprene is realy anti slip maybe too mutch. First i need find best position for me. Surface pad is another story. [Imgur](https://imgur.com/TmPfJ9j) [Imgur](https://imgur.com/h54uoas) [Imgur](https://imgur.com/kmkIjfo) [Imgur](https://imgur.com/7IJBDuy) [Imgur](https://imgur.com/e3PUCHw) [Imgur](https://imgur.com/qggknl0) Edited August 18, 2020 by DjPanJan info about frontlight added 5 Quote Link to comment Share on other sites More sharing options...
HippoPig Posted August 21, 2020 Share Posted August 21, 2020 1 Quote Link to comment Share on other sites More sharing options...
EMA Posted August 21, 2020 Share Posted August 21, 2020 5 hours ago, HippoPig said: Did you try them? 😀 Quote Link to comment Share on other sites More sharing options...
HippoPig Posted August 22, 2020 Share Posted August 22, 2020 7 hours ago, EMA said: Did you try them? 😀 Had a quick ride in the house and briefly in the street but the winds were super high yesterday. Feel pretty good though - I think I’ve angled them down more than the other posts I’ve seen. They feel good - they could even be a little wider for me, to cover more of the top of my foot. But really allow you to recover the wheel with less body weight / movement - more in line with how I have to move if my MSX drops a little when penduluming / moving slowly etc Quote Link to comment Share on other sites More sharing options...
EMA Posted August 22, 2020 Share Posted August 22, 2020 6 hours ago, HippoPig said: Had a quick ride in the house and briefly in the street but the winds were super high yesterday. Feel pretty good though - I think I’ve angled them down more than the other posts I’ve seen. They feel good - they could even be a little wider for me, to cover more of the top of my foot. But really allow you to recover the wheel with less body weight / movement - more in line with how I have to move if my MSX drops a little when penduluming / moving slowly etc Let me know if you want some tweak 👍 Quote Link to comment Share on other sites More sharing options...
HippoPig Posted August 22, 2020 Share Posted August 22, 2020 8 hours ago, EMA said: Let me know if you want some tweak 👍 Thanks! I’ll let you know once I’ve had a proper ride with them Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.