Ilya Shkolnik Posted January 14, 2019 Author Share Posted January 14, 2019 On 12/31/2018 at 10:09 PM, Jimmie Fulton said: I have an Inmotion V8. In the Inmotion App, my miles read considerably higher than the miles registered in the Darknessbot app. Precisely by the conversion from Miles to Kilometers. Not sure which app is miscalculating the number. My impression is that Darknessbot is reading the numbers off of the V8 assuming they are in kilometers, and converting to miles, and hence a much lower number. Thoughts? Anything I could do to help pin this down? Thanks! Edit: I see above a mention about a fix for Imperial Metrics, which I assume may have something to do with my issue. If so, I'll wait for the next update. Cheers. Yes, this bug only in the last beta. Will be fixed in next beta. On 1/8/2019 at 6:06 AM, SAS said: I have never understood how to get Darknessbot to report in miles instead of km. Where can you change the setting? DarknessBot getting iOS Region settings for detects current metric system. You can change it in Settings / General / Language & Region / Region 1 Quote Link to comment Share on other sites More sharing options...
radial Posted January 15, 2019 Share Posted January 15, 2019 The app is showing battery level on my KS18 XL at 100% even when it is well below that value. Is this because it isn't taking the extra battery capacity into account? Quote Link to comment Share on other sites More sharing options...
SAS Posted January 16, 2019 Share Posted January 16, 2019 On 1/14/2019 at 3:09 AM, Ilya Shkolnik said: Yes, this bug only in the last beta. Will be fixed in next beta. DarknessBot getting iOS Region settings for detects current metric system. You can change it in Settings / General / Language & Region / Region большое спасибо! Quote Link to comment Share on other sites More sharing options...
Bjarne Posted January 31, 2019 Share Posted January 31, 2019 I have multiple wheels, is it possible to change the name manually for devices? They appear in the list of generated names that I cannot distinguish. Example Gotway_19135 Quote Link to comment Share on other sites More sharing options...
US69 Posted January 31, 2019 Share Posted January 31, 2019 On 1/15/2019 at 3:40 PM, radial said: The app is showing battery level on my KS18 XL at 100% even when it is well below that value. Is this because it isn't taking the extra battery capacity into account? Have you set the config to 84Volts? But yeah...also it is showing 100% from about 83-84,xx Volts...dont know exactly... 13 minutes ago, Bjarne said: I have multiple wheels, is it possible to change the name manually for devices? They appear in the list of generated names that I cannot distinguish. Example Gotway_19135 Nope, thats not possible until now... Quote Link to comment Share on other sites More sharing options...
Ilya Shkolnik Posted February 17, 2019 Author Share Posted February 17, 2019 What's new in beta 5.1-210: - Added new Siri Shortcuts (Settings / Integration / Siri Shortcuts) - Fixed speed settings alarms for Metric system - Improved Ukrainian localization 1 1 Quote Link to comment Share on other sites More sharing options...
Noillek Posted March 2, 2019 Share Posted March 2, 2019 @Ilya Shkolnik I have been using you app with all my wheels thanks for the nice app and the constant evolution. I’m using now a Ninebot Z6 and I found out that randomly when I connect to the wheel it turns on the assisted braking feature from ninebot and is s*** because doesn’t let’s us know if is on or off... crashed yesterday because that feature was all of the sudden switched on while I switched off on purpose since I didn’t like it and is too intrusive. Can you see if is possible to prevent that to happen, so I can keep using the app? By the way in the FB group from 9Bot Z’s another user had the same... is not a single case, as it seems. Thank you for the great App keep evolving 👍🏻 Quote Link to comment Share on other sites More sharing options...
Ilya Shkolnik Posted March 8, 2019 Author Share Posted March 8, 2019 On 3/2/2019 at 2:48 PM, Noillek said: @Ilya Shkolnik I have been using you app with all my wheels thanks for the nice app and the constant evolution. I’m using now a Ninebot Z6 and I found out that randomly when I connect to the wheel it turns on the assisted braking feature from ninebot and is s*** because doesn’t let’s us know if is on or off... crashed yesterday because that feature was all of the sudden switched on while I switched off on purpose since I didn’t like it and is too intrusive. Can you see if is possible to prevent that to happen, so I can keep using the app? By the way in the FB group from 9Bot Z’s another user had the same... is not a single case, as it seems. Thank you for the great App keep evolving 👍🏻 Thanks for review, we can test this on Z6/8/10 coming soon Quote Link to comment Share on other sites More sharing options...
Noillek Posted March 11, 2019 Share Posted March 11, 2019 On 3/8/2019 at 9:29 PM, Ilya Shkolnik said: Thanks for review, we can test this on Z6/8/10 coming soon Thank you Ilya Quote Link to comment Share on other sites More sharing options...
Rino Posted March 16, 2019 Share Posted March 16, 2019 On the Apple Watch I can see different screens from DarknessBot. Can you make additional screens for us? I’d like to see “temperature and battery” on the same screen. Quote Link to comment Share on other sites More sharing options...
Rino Posted March 19, 2019 Share Posted March 19, 2019 On 3/16/2019 at 2:46 PM, Rino said: On the Apple Watch I can see different screens from DarknessBot. Can you make additional screens for us? I’d like to see “temperature and battery” on the same screen. @Ilya Shkolnik About these screens: You allready have created many good screens for the apple watch, and have the information allready. I just would like to have some of these informations present on the applpe watch at the same time. "temp and battery" is one, but could be others too (like speed and voltage). If possible, maybe best solution would be configurable like on the phone: screen configurations: 1 tile, 2 tiles, 4 tiles. And on each tile a user can choose which one to be displayed: example of a 4 tile screen solution: speed km/h. battery %, temperature, Horn 1 Quote Link to comment Share on other sites More sharing options...
Ilya Shkolnik Posted March 22, 2019 Author Share Posted March 22, 2019 On 3/19/2019 at 12:57 PM, Rino said: @Ilya Shkolnik About these screens: You allready have created many good screens for the apple watch, and have the information allready. I just would like to have some of these informations present on the applpe watch at the same time. "temp and battery" is one, but could be others too (like speed and voltage). If possible, maybe best solution would be configurable like on the phone: screen configurations: 1 tile, 2 tiles, 4 tiles. And on each tile a user can choose which one to be displayed: example of a 4 tile screen solution: speed km/h. battery %, temperature, Horn I want to change watch app UI in 5.2 version. Will be vertical scrolling with digital crown and 2-3 parameters on screen (for small and big watch models). 5.1 will be released soon. Quote Link to comment Share on other sites More sharing options...
Ilya Shkolnik Posted March 22, 2019 Author Share Posted March 22, 2019 What's new in beta 5.1-211: - Release Candidate - Improved Shop - Improved Siri Shortcuts Quote Link to comment Share on other sites More sharing options...
Ilya Shkolnik Posted March 23, 2019 Author Share Posted March 23, 2019 What's new in beta 5.1-212: - Release Candidate 2 - Added place searching (On Map) - Improved routing (Long tap in Map) - Improved UI - Fixed changing Max Speed on Ninebot One Quote Link to comment Share on other sites More sharing options...
Lunna Posted March 24, 2019 Share Posted March 24, 2019 Thanks for a great app, got premium straight away! I can see you already working on new layout for Apple watch, great being able to see more digits at once. I also wounder if its possible to have map tracking start automatically every time you ride? And ability to combine two tracks into one map? Quote Link to comment Share on other sites More sharing options...
Ilya Shkolnik Posted March 24, 2019 Author Share Posted March 24, 2019 New directions service demo What's new in beta 5.1-213: - Release Candidate 3 - Added new transitions 1 Quote Link to comment Share on other sites More sharing options...
Ilya Shkolnik Posted March 25, 2019 Author Share Posted March 25, 2019 What's new in beta 5.1-214: - Release Candidate 4 - Improved transitions - Improved service for routing - Improved performance in Augmented Reality Mode Quote Link to comment Share on other sites More sharing options...
Ilya Shkolnik Posted March 25, 2019 Author Share Posted March 25, 2019 New screen transitions Quote Link to comment Share on other sites More sharing options...
Chili D Posted March 25, 2019 Share Posted March 25, 2019 Looking good. Would love to to have a shortcut to toggle the twinkle light and solid light. Would also like to use your great app to modify the rgbs instead f then KS app. Quote Link to comment Share on other sites More sharing options...
Ilya Shkolnik Posted March 25, 2019 Author Share Posted March 25, 2019 12 hours ago, Chili D said: Looking good. Would love to to have a shortcut to toggle the twinkle light and solid light. Would also like to use your great app to modify the rgbs instead f then KS app. Strobe mode in plans (Gotway and KS only) RGB led settings are a big feature (for all supported models) with little effect. Plans for DarknessBot more global. 1 Quote Link to comment Share on other sites More sharing options...
Ilya Shkolnik Posted March 27, 2019 Author Share Posted March 27, 2019 What's new in beta 5.1-215: - Release Candidate 5 - Fixed screen transitions 1 Quote Link to comment Share on other sites More sharing options...
US69 Posted March 27, 2019 Share Posted March 27, 2019 18 minutes ago, Ilya Shkolnik said: What's new in beta 5.1-215: - Release Candidate 5 - Fixed screen transitions Hy Ilya, can you please set the amperage warnings (Vibration/Sound) higher? A maximum for 50Amps is just not enough for a GW... We would Need to be able to set at least up to 150 Amps..... Also on my Wishlist - a new Tile, where average Watthour consumption is displayed…. - a combined graph of Speed and amperage….like wheellog does. Thanks a lot :-) 2 1 Quote Link to comment Share on other sites More sharing options...
RockyTop Posted March 27, 2019 Share Posted March 27, 2019 4 minutes ago, US69 said: can you please set the amperage warnings (Vibration/Sound) higher? A maximum for 50Amps is just not enough for a GW... We would Need to be able to set at least up to at least 150 amps.... Yes, I used the amp settings on my MSuper for a few minutes. It turned my classical music into Dubstep. Thanks Quote Link to comment Share on other sites More sharing options...
Ilya Shkolnik Posted March 28, 2019 Author Share Posted March 28, 2019 22 hours ago, US69 said: We would Need to be able to set at least up to 150 Amps..... In next beta 1 2 Quote Link to comment Share on other sites More sharing options...
US69 Posted March 28, 2019 Share Posted March 28, 2019 40 minutes ago, Ilya Shkolnik said: In next beta Top notch as Always :-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.