Popular Post DavidB Posted November 27, 2022 Popular Post Share Posted November 27, 2022 (edited) On 11/25/2022 at 2:25 AM, aze man said: I would say hillclimbing without overheating is not dependable on voltage, only on the cooling capability itself. Have you watched the Video from eevee´s of the Sherman S Stress Test? Here the S22 and the Master overheated while Master Pro and Sherman S are keeping cool. I was disappointed with that part of the eevee's video. Ryan/Ginger on the s22 said he weighs 103kg/225lbs. The guy on the Master (Albert?) looked just as big, maybe more. Bradley from memory (in another vid) said he was under 80kg ( 78kg?) . The guy on the Master Pro (Doug?) looked even smaller. I'm guessing 70kg or less. So if the guys on the S22 and Master weigh almost 50% more than the guy on the Master Pro and 32% more than the guy on the Sherman-S there is no way you can compare fairly the cooling efficencies of these wheels. One is doing 50% more work than the other lifting 103kg up a hill instead of ~70kg. You would need to do the run again with the heavy guys on the Sherman-s and the Master Pro with the light guys on the S22 and Master before you could draw any conclusions. Edited November 27, 2022 by DavidB 2 3 Quote Link to comment Share on other sites More sharing options...
DavidB Posted November 27, 2022 Share Posted November 27, 2022 (edited) Looks a bit like a rushed copy and not nearly as well engineered as the Sherman-S. Bolts sticking out of the pedal hangers and a large lump of metal below looking for a rock to hit. Edited November 27, 2022 by DavidB 1 Quote Link to comment Share on other sites More sharing options...
alexbrunoeuc Posted November 27, 2022 Share Posted November 27, 2022 3 hours ago, DavidB said: Looks a bit like a rushed copy and not nearly as well engineered as the Sherman-S. Bolts sticking out of the pedal hangers and a large lump of metal below looking for a rock to hit. I've seen a video from WrongWay on YT in which he shows how slippery the Sherman-S pedals are... Also the mechanism which holds them in different positions wears down super fast plus cause of that mechanism there will be less chance to get aftermarket ones. But yes, these look cheap (at least on the photo) and if the grey appearing inner part is made of plastic then it won't stay grippy for to long. The bolts may be changed on the production model, hopefully. It looks like it is adjustable in height, moveable pedal hanger. Quote Link to comment Share on other sites More sharing options...
alexbrunoeuc Posted November 27, 2022 Share Posted November 27, 2022 12 hours ago, DavidB said: I was disappointed with that part of the eevee's video. Ryan/Ginger on the s22 said he weighs 103kg/225lbs. The guy on the Master (Albert?) looked just as big, maybe more. Bradley from memory (in another vid) said he was under 80kg ( 78kg?) . The guy on the Master Pro (Doug?) looked even smaller. I'm guessing 70kg or less. So if the guys on the S22 and Master weigh almost 50% more than the guy on the Master Pro and 32% more than the guy on the Sherman-S there is no way you can compare fairly the cooling efficencies of these wheels. One is doing 50% more work than the other lifting 103kg up a hill instead of ~70kg. You would need to do the run again with the heavy guys on the Sherman-s and the Master Pro with the light guys on the S22 and Master before you could draw any conclusions. Thank you for that 😃👍. Would be more accurate data if one guy rides all the wheels for comparison. Quote Link to comment Share on other sites More sharing options...
MrMonoWheel Posted November 27, 2022 Share Posted November 27, 2022 1 hour ago, alexbrunoeuc said: I've seen a video from WrongWay on YT in which he shows how slippery the Sherman-S pedals are... Also the mechanism which holds them in different positions wears down super fast plus cause of that mechanism there will be less chance to get aftermarket ones. But yes, these look cheap (at least on the photo) and if the grey appearing inner part is made of plastic then it won't stay grippy for to long. The bolts may be changed on the production model, hopefully. It looks like it is adjustable in height, moveable pedal hanger. The Sherman S pedal mechanism is a joke, in this video (should be time stamped at 20:10) you can see the mechanism on one side is already no longer functional. Regarding the commander pro pedals, the inner part is actually clear acrylic/polycarbonate. Also, does anyone know if the Commander Pro/Sherman S have hot charge ports? 1 Quote Link to comment Share on other sites More sharing options...
Rawnei Posted November 27, 2022 Share Posted November 27, 2022 26 minutes ago, Unicycle Santa said: The Sherman S pedal mechanism is a joke, in this video (should be time stamped at 20:10) you can see the mechanism on one side is already no longer functional. Regarding the commander pro pedals, the inner part is actually clear acrylic/polycarbonate. Also, does anyone know if the Commander Pro/Sherman S have hot charge ports? It's Begode and LK I fully expect hot ports. 1 1 1 Quote Link to comment Share on other sites More sharing options...
DavidB Posted November 27, 2022 Share Posted November 27, 2022 (edited) 2 hours ago, Unicycle Santa said: The Sherman S pedal mechanism is a joke, in this video (should be time stamped at 20:10) you can see the mechanism on one side is already no longer functional. Regarding the commander pro pedals, the inner part is actually clear acrylic/polycarbonate. Also, does anyone know if the Commander Pro/Sherman S have hot charge ports? Unnecessary. I wouldn't say it is a joke. They obviously thought about what to do with pedals that can't be raised due to pads. It is just their solution was a bit of a waste of time an money. Ecodrift put up some photos of the mechanism and it is clear that it would be super cheap and easy to modify the teeth rachet although as Marty discovered a little bit of use will do it for you! Over engineered in my view adding unnecessary cost and complexity to an already expensive product. That time and money could have been used to make adjustable height and angle pedals. Likewise for the pedals themselves. Their solution to being able to enlarge the pedals was over engineered and gimmicky and actually worse than the obvious option. Their solution. Sliding rods held in place by screws on a machined flat on the rod which allow only 1cm extra extension! And protruding round head screws that lift your shoes off the spikes. A far cheaper, less complicated solution would be to make normal length pedals and include with each wheel a bit of alloy or plastic that anybody with bigger than normal feet can screw into the front and back of the pedals to extend their length. Edited November 28, 2022 by DavidB 1 1 Quote Link to comment Share on other sites More sharing options...
DavidB Posted November 28, 2022 Share Posted November 28, 2022 While on the subject of pedals. Some thought also should be to safety. Half a decade ago wheels were 12-17kg. Now most are 36-44+kg and come with very solid metal pedals with blade like edges. I see one rider recently had his arm snapped by his Hero's pedal. It sounded like he wasn't even going that fast. Quote Link to comment Share on other sites More sharing options...
mrelwood Posted November 28, 2022 Share Posted November 28, 2022 6 hours ago, DavidB said: Half a decade ago wheels were 12-17kg. Now most are 36-44+kg and come with very solid metal pedals with blade like edges. The modern honeycomb pedal style tends to be much thicker at the edge than the standard pedals used to be 7 years ago. They were sharp! 1 Quote Link to comment Share on other sites More sharing options...
Sabestian Posted December 9, 2022 Share Posted December 9, 2022 Why so quiet? I am really looking forward to this wheel, was going for EX30 but EB may get my money. I hope that it's under development? Perhaps they struggle with 134V? Quote Link to comment Share on other sites More sharing options...
Chris Wagner Posted December 9, 2022 Share Posted December 9, 2022 There are just no news on this wheel..sadly. Iam also looking foreward to the first reviews Quote Link to comment Share on other sites More sharing options...
alexbrunoeuc Posted December 10, 2022 Share Posted December 10, 2022 15 hours ago, Sabestian said: Why so quiet? I am really looking forward to this wheel, was going for EX30 but EB may get my money. I hope that it's under development? Perhaps they struggle with 134V? Don't think that they gonna have a problem cause it's basically a begode master with added Bluetooth speakers and a different shell. Quote Link to comment Share on other sites More sharing options...
Popular Post Steve Evans Posted December 10, 2022 Popular Post Share Posted December 10, 2022 38 minutes ago, alexbrunoeuc said: Don't think that they gonna have a problem cause it's basically a begode master with added Bluetooth speakers and a different shell. thinking maybe suspension issues 4 Quote Link to comment Share on other sites More sharing options...
That Guy Posted December 11, 2022 Share Posted December 11, 2022 On 12/10/2022 at 9:02 AM, Sabestian said: Why so quiet? Commanders are surfing the success of Sherman. It will be even harder for Begode to make a decent knock-off of Sherman-S, which is reportedly a very mature product. 1 Quote Link to comment Share on other sites More sharing options...
techyiam Posted December 25, 2022 Share Posted December 25, 2022 Wow, good effort on the suspension design. Its implementation is original. The suspension structs could even be Begode inhouse design. There are actual machined parts. We need to see more though. The battery packs are definitely an improvement over current Begode suspension offerings. It appears that LeaperKim's Sherman-S has inspired Begode to improve their designs in significant ways. I like the new direction Commander Pro is taking over the Master design. https://m.facebook.com/groups/ElectricUnicycle/permalink/5742908822473700/?m_entstream_source=group&ref=group_browse&paipv=0&eav=AfbKlhmZKp2Z8bndS4I7KAztoiyp0Tzk-FsW4cj8BI5ofI3spSmt2rskFMCtCB6olj8 2 1 Quote Link to comment Share on other sites More sharing options...
Rawnei Posted December 25, 2022 Share Posted December 25, 2022 Weird design to me, why both piston and pom wheels? The cnc part seems to be attached with 4 screws hope it's more than just friction or it's potentially dangerous. Hopefully you can adjust the rebound without dissassemly. Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted December 25, 2022 Share Posted December 25, 2022 Looks robust (to my amateur eyes), clean, simple. Liking it!! Do we know what motor they use on this one? EX30 vs. this will be interesting! Which suspension design will people prefer? Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted December 25, 2022 Share Posted December 25, 2022 1 hour ago, Rawnei said: Weird design to me, why both piston and pom wheels? You're right. I wonder if these wheels will be loud in use, especially if some dirt gets to them. 1 Quote Link to comment Share on other sites More sharing options...
Rawnei Posted December 25, 2022 Share Posted December 25, 2022 1 hour ago, meepmeepmayer said: Looks robust (to my amateur eyes), clean, simple. Liking it!! Do we know what motor they use on this one? EX30 vs. this will be interesting! Which suspension design will people prefer? Guessing it's c38 since they made it 134v now while ex30 is c40 😯 Quote Link to comment Share on other sites More sharing options...
mrelwood Posted December 26, 2022 Share Posted December 26, 2022 18 hours ago, Rawnei said: why both piston and pom wheels? My guess, there’s enough flex in the battery compartments that they needed something to keep it from dragging against the axle area / strut lower bout. 1 Quote Link to comment Share on other sites More sharing options...
Mars Bless Posted December 28, 2022 Share Posted December 28, 2022 On 12/25/2022 at 11:16 AM, meepmeepmayer said: Looks robust (to my amateur eyes), clean, simple. Liking it!! Do we know what motor they use on this one? EX30 vs. this will be interesting! Which suspension design will people prefer? From what they posted on FB, it's a C38 motor vs C40 on the EX30 1 Quote Link to comment Share on other sites More sharing options...
BKW Posted January 2, 2023 Share Posted January 2, 2023 (edited) This wheel just made an appearance on ewheels site shop section https://www.ewheels.com/product/eb-commander-pro-deposit/ Edited January 2, 2023 by BKW 1 Quote Link to comment Share on other sites More sharing options...
Rawnei Posted January 2, 2023 Share Posted January 2, 2023 Does the Commander Pro really come with plastic pedals ? Quote Link to comment Share on other sites More sharing options...
MrMonoWheel Posted January 2, 2023 Share Posted January 2, 2023 4 hours ago, BKW said: This wheel just made an appearance on ewheels site shop section https://www.ewheels.com/product/eb-commander-pro-deposit/ Jesus Christ $4k USD? I thought it was supposed to be "cheap". I could have sworn I heard price estimates around the $3k mark. 1 Quote Link to comment Share on other sites More sharing options...
Mars Bless Posted January 2, 2023 Share Posted January 2, 2023 2 hours ago, MrMonoWheel said: Jesus Christ $4k USD? I thought it was supposed to be "cheap". I could have sworn I heard price estimates around the $3k mark. Yea that's gonna be the going price in the US it seems. Much cheaper on AliExpress at the moment Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.