Popular Post wheel-life Posted June 3, 2022 Popular Post Share Posted June 3, 2022 20 hours ago, jimjam.nyc said: I have been riding my v12 heavily for the past few weeks. Waiting to hear from ewheels about replacements is nearly maddening. They do answer when i bug them, but then never follow up. At this point like i have mentioned in other posts, i am just going to ride my wheel. Everyone got their damn money from me for this wheel, but none of the parties that cashed in even communicate out the bare min of what is going on. Thank god we have an active community or many of us would not even know what is happening. Anyway.. I spent the cash.. I am going to just try to enjoy the wheel and gear up as much as possible when riding in hopes to avoid any cutout or injury fwiw, i heard from ewheels recently (below). they have to focus on those without working wheels first and then those of us with wheels that haven't died yet will be next. tbh, i'll be happy to get a working wheel by fall at this point and just gonna keep using the 16X through the summer. Quote Here's where things stand: Inmotion allocated 100x to us, but there's 300x V12x from that early November shipment (your batch). The immediate priority is going to be sending out controllers to Customers who are out of action, & the remainder for the rest, but trying dividing 100/300 is an impossible situation According to the latest information from the factory, they'll be shipping out the remaining controllers by the end of this month, but they've missed their ETA on these before. The situation is not entirely Inmotion's fault, the MOSFET factory is located in the Shanghai region, now running into 8+ weeks of total shutdown, this year is stacking up to be the most disruptive ever. 4 Quote Link to comment Share on other sites More sharing options...
Paul A Posted June 3, 2022 Share Posted June 3, 2022 New York population is approximately 20 million in metropolitan area. Shanghai population is approximately 25 million. Shanghai's Covid lockdown began on April 5, just ended on June 1, approximately 2 months. All 25 million in Shanghai were lock downed. 1 1 Quote Link to comment Share on other sites More sharing options...
Robert RFI Posted June 5, 2022 Share Posted June 5, 2022 Hello all. Like some others have stated; I pre-ordered a V12 HS almost 2 months ago. This will be my FIRST EUC. I have not had any concerns until now, with all the talk about the new Replacement boards still having issues. My EUC is at a port in LA waiting to be unloaded and shipped to EWheels and than to me. Do you think that I should be concerned about it having the same failures? I am also confused if the consensus is that both HT and HS will have the same problems still or is it just mainly the HS? Should I change my order to a HT? Any feedback will be appreciated. 2 Quote Link to comment Share on other sites More sharing options...
Popular Post jimjam.nyc Posted June 5, 2022 Popular Post Share Posted June 5, 2022 1 hour ago, Robert RFI said: Hello all. Like some others have stated; I pre-ordered a V12 HS almost 2 months ago. This will be my FIRST EUC. I have not had any concerns until now, with all the talk about the new Replacement boards still having issues. My EUC is at a port in LA waiting to be unloaded and shipped to EWheels and than to me. Do you think that I should be concerned about it having the same failures? I am also confused if the consensus is that both HT and HS will have the same problems still or is it just mainly the HS? Should I change my order to a HT? Any feedback will be appreciated. Unfortunately nobody really knows what is actually happening. I am not sure I would recommend you to change an order or anything. But I would take some time to trust your new wheel. Also just be aware if there is an issue with it, it may take time to get parts/resolution on it. That being said, there are many enjoying their v12s out there. It's not all doom and gloom. 2 2 Quote Link to comment Share on other sites More sharing options...
Paul g Posted June 5, 2022 Share Posted June 5, 2022 4 hours ago, Robert RFI said: Hello all. Like some others have stated; I pre-ordered a V12 HS almost 2 months ago. This will be my FIRST EUC. I have not had any concerns until now, with all the talk about the new Replacement boards still having issues. My EUC is at a port in LA waiting to be unloaded and shipped to EWheels and than to me. Do you think that I should be concerned about it having the same failures? I am also confused if the consensus is that both HT and HS will have the same problems still or is it just mainly the HS? Should I change my order to a HT? Any feedback will be appreciated. Hi, @Robert RFI,and welcome! I think nobody knows exactly what is going on with the new V12 HS. There are few reported issues with the few V12 HT (the star of the show), which is concerning and with the replacement board for the old V12 HS. About the NEW V12 HS nobody knows much ( with the new 125V driving board). You will be probably among the first people to receive the NEW V12 HS. We will know more as more people will start riding it. I advise you if you receive the V12, HS or HT to treat it like an unknown, take full gear on and be prepared for the unexpected. Consider if you will be able to handle a crash. If not, maybe would be a better idea to cancel and buy something that is more safe and predictable. 1 1 Quote Link to comment Share on other sites More sharing options...
Popular Post souki Posted June 6, 2022 Popular Post Share Posted June 6, 2022 Mywheel just sent me tracking number for my V12 HS with new board and they have attached info that they have tested it and didn't find any issue mentioned here. I will be still careful for the first ~100km before I trust the wheel but it is nice to know, that they don't send wheels blindly. Fingers cross that I don't test my gear I really hope that it will work because V12 checks all the boxes for me - except this (major) board issue.... 9 Quote Link to comment Share on other sites More sharing options...
Popular Post Pingouin Posted June 6, 2022 Popular Post Share Posted June 6, 2022 Hi guys ! After 1700km with no issues with the original motherboard, we did a board swap with the board with new mosfets. The mosfets arrived slightly bent, we fixed them on the heatsink with some standard thermal paste. It has been ridden about 60km no issues so far, we did try top speed, jumps, hard acceleration and climbing a 35° inclimb. It was on original firmware than came with batch 2 V12, no firmware update so far. It is still quite annoying that despite the new board, there still remains a fear of having this new board fail (reason why the swap happened in the firsst place).. 7 2 Quote Link to comment Share on other sites More sharing options...
Steve Evans Posted June 7, 2022 Share Posted June 7, 2022 i now have 200 miles on the new driver board. still riding with apprehension that a cutout is imminent. does anyone have a sense of the percentage of new boards that have cutout whilst riding? 2 1 Quote Link to comment Share on other sites More sharing options...
Paul A Posted June 7, 2022 Share Posted June 7, 2022 Percentage of new boards cutting out might be data that will be provided by the people currently riding on the new boards. The guinea pigs. Quote Link to comment Share on other sites More sharing options...
Rawnei Posted June 7, 2022 Share Posted June 7, 2022 30 minutes ago, Paul A said: Percentage of new boards cutting out might be data that will be provided by the people currently riding on the new boards. The guinea pigs. I haven't seen an actual case of anyone with new board that failed? Some botched installations sure and one who got a brand new V12 who failed from factory, but can you point towards the cases where someone swapped board for it to later fail during riding? Quote Link to comment Share on other sites More sharing options...
Paul A Posted June 7, 2022 Share Posted June 7, 2022 The post is illustrating that the boards are new. The data for failure rate would be incoming in over the next few weeks, months, from the people riding on them now. Quote Link to comment Share on other sites More sharing options...
Rawnei Posted June 7, 2022 Share Posted June 7, 2022 25 minutes ago, Paul A said: The post is illustrating that the boards are new. The data for failure rate would be incoming in over the next few weeks, months, from the people riding on them now. So you are assuming. Quote Link to comment Share on other sites More sharing options...
Paul A Posted June 7, 2022 Share Posted June 7, 2022 The post is highlighting that there might not be data yet on failure rates, as the boards are new. Failures may or may not eventuate in the coming weeks and months. Member evans036 was inquiring about the percentage of failures in the new boards. Not sure how to further explain to make it any clearer.... Quote Link to comment Share on other sites More sharing options...
Rawnei Posted June 7, 2022 Share Posted June 7, 2022 9 minutes ago, Paul A said: The post is highlighting that there might not be data yet on failure rates, as the boards are new. Failures may or may not eventuate in the coming weeks and months. Member evans036 was inquiring about the percentage of failures in the new boards. Not sure how to further explain to make it any clearer.... Ok then maybe I misunderstood you, I think it's clearer if you quote the person you are replying to. 1 Quote Link to comment Share on other sites More sharing options...
Paul A Posted June 7, 2022 Share Posted June 7, 2022 @Rawnei ok, will try to remember to quote, thanks. 1 Quote Link to comment Share on other sites More sharing options...
Rawnei Posted June 7, 2022 Share Posted June 7, 2022 I repeat my question though to everyone, has anyone seen an actual case of V12 new board failure? One where replacement of old board was successful but later it stopped working? Quote Link to comment Share on other sites More sharing options...
Paul A Posted June 7, 2022 Share Posted June 7, 2022 (edited) 9 minutes ago, Rawnei said: I repeat my question though to everyone, has anyone seen an actual case of V12 new board failure? One where replacement of old board was successful but later it stopped working? Full Members Mrd777 Posted Thursday at 07:13 PM Super sad as I just spent hours installing my new board to my v12 and it failed, I worked meticulously installing it too. I did notice after screwing in the mosfets I was getting conductivity on several screws, so I used the new screws provided, and reapplied the thermal ribbon and that solved that issue. I turned the wheel on and heard a very light pop and the wheel balanced with no lcd screen for a minute… that was it. When I turned it on again there is nothing. I will take it apart next week and diagnose the problem when I’m back in the studio. Super disappointed. Posted Thursday at 10:30 PM Yes well aware, I adjusted this and checked three times each screw with a multimeter. I made sure there was complete isolation before installing. I know what I was doing as I used to build battery packs and ebikes, I was confident on my work… I’ll find out what happened, and install my old board if everything checks out. Let’s see Posted Friday at 08:49 AM Just in update, I took the V12 apart and tested the mosfets and reinstalled it all over again. Im certainly getting better at it, However it’s still a process. Turned the wheel on and it balances, however if I lift it up for speed it’s very jerky. No lcd screen, no sounds, no lights no Bluetooth. I’m pretty sure I got a dud controller. I’m waiting for Ewheels to get back to me.. I’m done I want to ship it to Inmotion or Ewheels for a fix. Tired of this nonsense. Edited June 7, 2022 by Paul A Quote Link to comment Share on other sites More sharing options...
Rawnei Posted June 7, 2022 Share Posted June 7, 2022 Just now, Paul A said: Full Members Posted Thursday at 07:13 PM Super sad as I just spent hours installing my new board to my v12 and it failed, I worked meticulously installing it too. I did notice after screwing in the mosfets I was getting conductivity on several screws, so I used the new screws provided, and reapplied the thermal ribbon and that solved that issue. I turned the wheel on and heard a very light pop and the wheel balanced with no lcd screen for a minute… that was it. When I turned it on again there is nothing. I will take it apart next week and diagnose the problem when I’m back in the studio. Super disappointed. Posted Thursday at 10:30 PM Yes well aware, I adjusted this and checked three times each screw with a multimeter. I made sure there was complete isolation before installing. I know what I was doing as I used to build battery packs and ebikes, I was confident on my work… I’ll find out what happened, and install my old board if everything checks out. Let’s see Posted Friday at 08:49 AM Just in update, I took the V12 apart and tested the mosfets and reinstalled it all over again. Im certainly getting better at it, However it’s still a process. Turned the wheel on and it balances, however if I lift it up for speed it’s very jerky. No lcd screen, no sounds, no lights no Bluetooth. I’m pretty sure I got a dud controller. I’m waiting for Ewheels to get back to me.. I’m done I want to ship it to Inmotion or Ewheels for a fix. Tired of this nonsense. Yeah but that is an installation that failed, not a board that failed while riding after successful installation. 1 1 Quote Link to comment Share on other sites More sharing options...
Mrd777 Posted June 7, 2022 Share Posted June 7, 2022 (edited) Update I have done three installs, two with the new board, and now with the old board. Wheel is dead. No power, nothing... Something must have damaged the slave board during my first install (guessing). Its been huge work, and Im done playing with it. Its been every bit of two full days doing the the installs. I contacted ewheels and waiting to hear back. I want Inmotion to take responsibility and fix the wheel for me. Edited June 8, 2022 by Mrd777 5 Quote Link to comment Share on other sites More sharing options...
Rawnei Posted June 7, 2022 Share Posted June 7, 2022 6 minutes ago, Mrd777 said: Update I have done three installs, two with the new board, and now with the old board. Wheel is dead. No power, nothing... Something must have damaged the slave board during my first install (guessing). Its been huge work, and Im done playing with it. Its been every bit of two full days doing the the installs. I contacted wheels and waiting to hear back. I want Inmotion to take responsibility and fix the wheel for me. Was it not an option to get it fixed by reseller? Quote Link to comment Share on other sites More sharing options...
Mrd777 Posted June 7, 2022 Share Posted June 7, 2022 48 minutes ago, Rawnei said: Was it not an option to get it fixed by reseller? Not that I knew about, I didn't mind doing the job, as I have changed a tire on it and was familiar with the wheel... however this whole process has been a nightmare, not to mention @Inmotion Global using 100v rated mosfets on a 100v wheel. Hopefully I get a solid answer from Ewheels, as their customer service is second to none. My wheel only had a couple of hundred miles on it. Quote Link to comment Share on other sites More sharing options...
Steve Evans Posted June 7, 2022 Share Posted June 7, 2022 13 minutes ago, Mrd777 said: Not that I knew about, I didn't mind doing the job, as I have changed a tire on it and was familiar with the wheel... however this whole process has been a nightmare, not to mention @Inmotion Global using 100v rated mosfets on a 100v wheel. Hopefully I get a solid answer from Ewheels, as their customer service is second to none. My wheel only had a couple of hundred miles on it. the email i got from ewheels about receipt of the new boards said i could send the wheel in for repair as an option. i opted to do it myself. Quote Link to comment Share on other sites More sharing options...
Funky Posted June 7, 2022 Share Posted June 7, 2022 (edited) 23 minutes ago, Mrd777 said: Not that I knew about, I didn't mind doing the job, as I have changed a tire on it and was familiar with the wheel... however this whole process has been a nightmare, not to mention @Inmotion Global using 100v rated mosfets on a 100v wheel. Hopefully I get a solid answer from Ewheels, as their customer service is second to none. My wheel only had a couple of hundred miles on it. I also would have been mad. If my new wheel would not work as it should.. Even worse is that inmotion continues to sell these crap v11, v12 that aren't fixed.. How no one have not sued the company???(Even if they are in china or where ever.. Someone could sue them.) It's know issue - the company it self said so.. If people get hurt, while riding these "broken" euc's. It's really company fault, because they sold these "broken" wheels. Edited June 7, 2022 by Funky 1 Quote Link to comment Share on other sites More sharing options...
Popular Post rolis Posted June 8, 2022 Popular Post Share Posted June 8, 2022 Hi everybody. Its been a few days so here is my update on the V12HS with a new board. Firstly, it seems that these board failures seem to happen when installing the new boards. There haven´t been many instances of them failing. You have to be very careful not to squish any cables when putting the box together where the two boards are located and then when putting the top part with the display and handle on as well. This might not be the issue, but the V12 is a pretty complex build and it´s a bad idea letting the final consumer have a go at it. Secondly... I love it! It rides like a charm. I have been riding it nonstop for the last 3 days and I don´t think it will fail on me. Now its time for upgrades. Pads and pedals are a must! 6 4 Quote Link to comment Share on other sites More sharing options...
Robse Posted June 8, 2022 Share Posted June 8, 2022 21 minutes ago, rolis said: This might not be the issue, but the V12 is a pretty complex build and it´s a bad idea letting the final consumer have a go at it. Wise words indeed 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.