Freestyler Posted November 13, 2022 Author Share Posted November 13, 2022 @RolluS & @daniel1234 instructions to test hard pedal mode fix sent 1 Quote Link to comment Share on other sites More sharing options...
Rawnei Posted November 13, 2022 Share Posted November 13, 2022 34 minutes ago, Freestyler said: @RolluS & @daniel1234 instructions to test hard pedal mode fix sent Ah, so PID change was only for hard mode? Perhaps worth replicating over medium and soft also? Quote Link to comment Share on other sites More sharing options...
daniel1234 Posted November 14, 2022 Share Posted November 14, 2022 I will try test it later today hopefully. Flashing without a problem - it is funny how custom FW is easier to flash than official ones. Quote Link to comment Share on other sites More sharing options...
daniel1234 Posted November 14, 2022 Share Posted November 14, 2022 (edited) Seems like begode app 1.0.9. is stable on my samsung for flashing. App 1.0.13 is stable only on my GF Chinese phone. Vice versa it doesn't work - it corrupt process making you messing with wires. Edited November 14, 2022 by daniel1234 1 Quote Link to comment Share on other sites More sharing options...
RolluS Posted November 14, 2022 Share Posted November 14, 2022 Hi all, 15 hours ago, Freestyler said: @RolluS & @daniel1234 instructions to test hard pedal mode fix sent Thank you, I'll test during this week. 48 minutes ago, daniel1234 said: Seems like begode app 1.0.9. is stable on my samsung for flashing. App 1.0.13 is stable only on my GF Chinese phone. Vice versa it doesn't work - it corrupt process making you messing with wires. Same for me on my Google Pixel 6. 1.0.13 force close whenever I set up the custom firmware thing. Quote Link to comment Share on other sites More sharing options...
Freestyler Posted November 14, 2022 Author Share Posted November 14, 2022 16 hours ago, Rawnei said: Ah, so PID change was only for hard mode? Perhaps worth replicating over medium and soft also? Yeap, only hard mode was ported. Are the other modes "broken" as well? App stuff: I still use version 1.0.9 as I find it more stable for my work. I have not investigated the crash due to proxy, but a workaround I've done in the past is to only setup proxy when the app is already started and inside the settings. Quote Link to comment Share on other sites More sharing options...
EMA Posted November 14, 2022 Share Posted November 14, 2022 forgot to say i'm a happy user of @Freestyler firmware on my mcm5 , thumbs up for the amazing work 2 Quote Link to comment Share on other sites More sharing options...
Ben Kim Posted November 14, 2022 Share Posted November 14, 2022 23 hours ago, Freestyler said: @RolluS & @daniel1234 instructions to test hard pedal mode fix sent Do you have firmware for an EX20S? Just curious. Quote Link to comment Share on other sites More sharing options...
daniel1234 Posted November 14, 2022 Share Posted November 14, 2022 7 hours ago, Freestyler said: Yeap, only hard mode was ported. Thank you. I riden 30 km on hard mode(fully geared). Seems better - or I notice just a little pedal wobbliness - but it is hard to quantify. I need to test it more to be sure. But feels stable/safe up to 48 km/h - I had 75 percent PWM tilt-back not letting me go much faster. The wheel feels a little more responsive like there is less lag between lean and acceleration which is nice surprise! I am curious on Rollus experience. I have V1 T4 board with QS motor. Hope there are not many of us out there . 2 Quote Link to comment Share on other sites More sharing options...
Freestyler Posted November 14, 2022 Author Share Posted November 14, 2022 2 hours ago, Ben Kim said: Do you have firmware for an EX20S? Just curious. Yeap. Every Begode wheel that has been released with firmware update capability has been flashed! So that only leaves out old wheels such as msx & msp and extreme bull wheels (commander, x-max). 2 Quote Link to comment Share on other sites More sharing options...
Phi1osopher Posted November 15, 2022 Share Posted November 15, 2022 (edited) EDIT #2 Turns out the new board Begode sent me had a bad firmware that was incompatible with updating... Last night (11/15/22) they released Master firmware v 2.3 which solved my problem. I am trying to update firmware on my V2 Master - eWheels version w/LiTech batteries. (My wheel arrived with a defective board, and apparently the new board I just received doesn't support the LiTech packs, so Begode tech support wants me to upgrade the firmware.) ... except I can't get it to install. Where can I download the older Begode app V 1.0.9? The current 1.0.13 is not working for me. EDIT: I downloaded 1.0.9 from here, but it didn't solve my problem. https://m.newasp.com/android/746321.html I have carefully tried to follow the online tutorials but I'm either doing something wrong, or there's something wrong with my new board. Edited November 15, 2022 by Phi1osopher 1 Quote Link to comment Share on other sites More sharing options...
Ben Kim Posted November 15, 2022 Share Posted November 15, 2022 8 hours ago, Freestyler said: Yeap. Every Begode wheel that has been released with firmware update capability has been flashed! So that only leaves out old wheels such as msx & msp and extreme bull wheels (commander, x-max). Since you have internal access to many parameters, is there a wheel diameter parameter from your observations to perhaps correct the wheels reported speed? most Begode wheels report speed that is about 8-9% inflated which also ruins single mileage / odometer numbers and I’d love to see that fixed! 2 1 Quote Link to comment Share on other sites More sharing options...
EUCzero Posted November 15, 2022 Share Posted November 15, 2022 (edited) I even have a MSX84 with new black board (upgraded not long ago) Any chance of a Freestyler tiltback FW on that? I feel it is more important on that one than the Master, as I am close to max so often. I am not having that problem on my Master 😉 Edited November 15, 2022 by EUCzero Quote Link to comment Share on other sites More sharing options...
RolluS Posted November 15, 2022 Share Posted November 15, 2022 4 hours ago, Phi1osopher said: My wheel arrived with a defective board, and apparently the new board I just received doesn't support the LiTech packs, so Begode tech support wants me to upgrade the firmware. To my knowledge, no Begode wheel has a smart BMS, so only thing the mainboard sees is a voltage. Can you elaborate "the board doesn't support LiTech packs" ? 1 1 Quote Link to comment Share on other sites More sharing options...
Freestyler Posted November 15, 2022 Author Share Posted November 15, 2022 4 hours ago, Ben Kim said: Since you have internal access to many parameters, is there a wheel diameter parameter from your observations to perhaps correct the wheels reported speed? most Begode wheels report speed that is about 8-9% inflated which also ruins single mileage / odometer numbers and I’d love to see that fixed! Yeap. I can change the reported speed. Already done that for a guy that put a 100v monster v3 board on his mcm5. 3 hours ago, EUCzero said: I even have a MSX84 with new black board (upgraded not long ago) Any chance of a Freestyler tiltback FW on that? I feel it is more important on that one than the Master, as I am close to max so often. I am not having that problem on my Master 😉 Even if the board is black, the firmware cannot always be flashed. The definitive way to know from my knowledge is to connect to euc-dash and see if the firmware version field is populated. If it's not, then no luck. I for example have a black controller that is not flashable. But I also don't have a 84v msx firmware. I have only for the 100v version. 1 2 Quote Link to comment Share on other sites More sharing options...
Asphalt Posted November 15, 2022 Share Posted November 15, 2022 3 hours ago, Freestyler said: Yeap. I can change the reported speed. Already done that for a guy that put a 100v monster v3 board on his mcm5. Is there any more information about this 100v MCM5 mod? Quote Link to comment Share on other sites More sharing options...
Phi1osopher Posted November 15, 2022 Share Posted November 15, 2022 9 hours ago, RolluS said: To my knowledge, no Begode wheel has a smart BMS, so only thing the mainboard sees is a voltage. Can you elaborate "the board doesn't support LiTech packs" ? That is what I was told from Begode, but it turned out to be wrong information. The issue has been resolved with a fresh official firmware update, v2.3. Quote Link to comment Share on other sites More sharing options...
RolluS Posted November 15, 2022 Share Posted November 15, 2022 This is nice. I still don't see the link between firmware and battery packs, but that's a good news that your problem is solved Quote Link to comment Share on other sites More sharing options...
InfiniteWheelie Posted November 18, 2022 Share Posted November 18, 2022 Are there any plans to make PWM tilt-back for LeaperKim wheels? 1 Quote Link to comment Share on other sites More sharing options...
Freestyler Posted November 23, 2022 Author Share Posted November 23, 2022 (edited) On 11/18/2022 at 12:33 PM, InfiniteWheelie said: Are there any plans to make PWM tilt-back for LeaperKim wheels? Many local riders have requested this. (sherman is a popular wheel!) I could try that, but the problem is that we don't have an easy way of recovering the wheel in case of a brick. Begode wheels are fairly easy to recover, on shermans we have to use an external chip that few people would have access to, so the risk is high. If someone finds a way to un-brick shermans without needing extra hardware (similar to Begode) then I can proceed with the firmware changes. (developing on a new wheel will surely lead to some bricks) Edited November 23, 2022 by Freestyler 2 Quote Link to comment Share on other sites More sharing options...
Lefteris Posted November 23, 2022 Share Posted November 23, 2022 6 minutes ago, Freestyler said: If someone finds a way to un-brick shermans without needing extra hardware (similar to Begode) then I can proceed with the firmware changes. (developing on a new wheel will surely lead to some bricks) There may be a way, since the wheel features a state that the fw puts it self in order to do the upgrade instead of blatantly writing on the chip. There may be a way to recover out of a faulty error, but this is something a few people will surely know, cause most of the cases of faulty fw upload people are directed on buying a new mobo.. 😥 If there is anyone that can reach people that have successfully recovered from known error states and stuff, it'll surely help. After that, i already have at hand an upgrade chip with 1.0.56, and more over files/binaries 😉.. The difficult thing is to find the time to play with these things, with you.. Quote Link to comment Share on other sites More sharing options...
Tawpie Posted November 23, 2022 Share Posted November 23, 2022 4 hours ago, Freestyler said: Many local riders have requested this. (sherman is a popular wheel!) I could try that, but the problem is that we don't have an easy way of recovering the wheel in case of a brick. Begode wheels are fairly easy to recover, on shermans we have to use an external chip that few people would have access to, so the risk is high. If someone finds a way to un-brick shermans without needing extra hardware (similar to Begode) then I can proceed with the firmware changes. (developing on a new wheel will surely lead to some bricks) You might check with @DrBytes, I believe he has some knowledge of the updater .apk and that could give clues on how to the process works—which might provide insight into unbricking Quote Link to comment Share on other sites More sharing options...
taiguy Posted November 28, 2022 Share Posted November 28, 2022 On 11/14/2022 at 8:48 PM, Phi1osopher said: EDIT #2 Turns out the new board Begode sent me had a bad firmware that was incompatible with updating... Last night (11/15/22) they released Master firmware v 2.3 which solved my problem. I am trying to update firmware on my V2 Master - eWheels version w/LiTech batteries. (My wheel arrived with a defective board, and apparently the new board I just received doesn't support the LiTech packs, so Begode tech support wants me to upgrade the firmware.) ... except I can't get it to install. Where can I download the older Begode app V 1.0.9? The current 1.0.13 is not working for me. EDIT: I downloaded 1.0.9 from here, but it didn't solve my problem. https://m.newasp.com/android/746321.html I have carefully tried to follow the online tutorials but I'm either doing something wrong, or there's something wrong with my new board. What firmware version were you on? I have an ewheels v2 with litech battery and mine is 2014503. I'm unable to upgrade to anything else listed in the app. Quote Link to comment Share on other sites More sharing options...
Jerqfase Posted November 28, 2022 Share Posted November 28, 2022 (edited) Hey @Freestyler, new to the forum. I've just installed a C30 into my EX.N torque. Have you got a firmware to go from C38 to C30 with tiltback? Currently I can't ride the wheel. Begode app won't push the C30 firmware (wheel turns off during flashing). It's a black board and I used your Euc-dash tool to verify that firmware version shows up. Edited November 28, 2022 by Jerqfase Corrected @ mention 1 Quote Link to comment Share on other sites More sharing options...
Freestyler Posted November 29, 2022 Author Share Posted November 29, 2022 Please help me understand your message better. You placed a C30 motor in your C38 board and now it is not driven correctly. Therefore you want to flash a C30 firmware in your board. Is that correct? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.