Denniss Posted June 16, 2016 Author Share Posted June 16, 2016 3 hours ago, Oli said: Anyone a guess how many people downgraded so far? Hard to say, but there seems to be a great demand for the downgrade. This thread has 300+ visitors a day. And I helped a lot of people worldwide with the downgrade via chat. 2 Quote Link to comment Share on other sites More sharing options...
Ozpeter Posted June 16, 2016 Share Posted June 16, 2016 Incoming new member... I hope my Ninebot Mini Pro will arrive on Tuesday. Should I upgrade the firmware, then downgrade using one of the excellent methods you clever people have devised, or should I do the downgrade procedure without bothering to upgrade first? In other words, does the procedure simply install the "good" version of the firmware regardless of whether that is actually an upgrade or downgrade from whatever version the new Mini Pro is equipped with by the factory? Thanks for the help - great work here! Quote Link to comment Share on other sites More sharing options...
Denniss Posted June 16, 2016 Author Share Posted June 16, 2016 25 minutes ago, Ozpeter said: Incoming new member... I hope my Ninebot Mini Pro will arrive on Tuesday. Should I upgrade the firmware, then downgrade using one of the excellent methods you clever people have devised, or should I do the downgrade procedure without bothering to upgrade first? In other words, does the procedure simply install the "good" version of the firmware regardless of whether that is actually an upgrade or downgrade from whatever version the new Mini Pro is equipped with by the factory? Thanks for the help - great work here! Check the installed firmware, very sure it will be 1.2.8. I haven't checked the process from eg. 1.2.7 ==> 1.1.7 but I'm sure it will work. If they will send you a newer one than the 1.2.8, choose the downgrade. Quote Link to comment Share on other sites More sharing options...
Botten Posted June 16, 2016 Share Posted June 16, 2016 I found a dealer which has Mini Pro´s delivered in March 2016, is it possible that this has the Originale Firmware 1.1.7  Quote Link to comment Share on other sites More sharing options...
jojo33 Posted June 16, 2016 Share Posted June 16, 2016 (edited) On 16/06/2016 at 7:14 PM, Botten said: I found a dealer which has Mini Pro´s delivered in March 2016, is it possible that this has the Originale Firmware 1.1.7  Hello Delivered in march ? a mini pro? I had look for a mini pro lower price in march and i didnt see any seller except ninebot spain, europa japan and kora, no saw any seller for mini pro, outside ninebot store Take care, maybe it's a xiaomi modele customizing with knee bar adjustable from a mini pro and hubcaps from mini pro, you can search spare parts for customize your xiaomi mini into a mini pro, for that, please take care, ask for battery picture, if it'sa pro need be like the pict a join here mini pro 5700mAh xiaomi mini 4300mAh Since march surely firmware was updated, to v1.2.8, or if not, refuse by touch "cancel" when the app advertize you for a new version cordialy       Edited June 29, 2016 by jojo33 Quote Link to comment Share on other sites More sharing options...
Denniss2 Posted June 16, 2016 Share Posted June 16, 2016 1 hour ago, Botten said: I found a dealer which has Mini Pro´s delivered in March 2016, is it possible that this has the Originale Firmware 1.1.7  Second batch of ninebot pro arrived late march / early april. So if this is true, your ninebot will have 1.1.7. Sellers don't update firmware. Quote Link to comment Share on other sites More sharing options...
Shockdude Posted June 18, 2016 Share Posted June 18, 2016 thanks Denniss and Alexander downgraded to 1.1.7 totally made my day! 1 Quote Link to comment Share on other sites More sharing options...
Sergio Sirus Posted June 19, 2016 Share Posted June 19, 2016 Hey guys, I tried to go through the steps but when going to this page: http://apptest.ninebot.cn/appversion/appdownload/NinebotMini/v1.1.7/Mini_Driver_V1.1 I get this error message: http://storage.googleapis.com/mps-storage/sarju/nydus-screenshots/qg2SkwXTDUL.png  Quote Link to comment Share on other sites More sharing options...
Denniss2 Posted June 19, 2016 Share Posted June 19, 2016 1 hour ago, Sergio Sirus said: Hey guys, I tried to go through the steps but when going to this page: http://apptest.ninebot.cn/appversion/appdownload/NinebotMini/v1.1.7/Mini_Driver_V1.1 I get this error message: http://storage.googleapis.com/mps-storage/sarju/nydus-screenshots/qg2SkwXTDUL.png  Wrong address, please check. There ist nothing in the tutorial that points to the zip, except of downloading it. And your Zip Link points to a wrong zip file. Quote Link to comment Share on other sites More sharing options...
EW-SG Posted June 20, 2016 Share Posted June 20, 2016 (edited) After trying the downloading all the software and tried setting up my own DNS server, it failed when I tried to start Posadis. Gave me a fatal error. Then re-read the post and tried the "lazy" method, (in other words, someone has already set up the DNS server on the WWW and all you need to do is point your smartphone (IOS or Android) with your current Ninebot app loaded to that DNS by following the instructions for changing your smartphone WiFi DNS. Then open the NineBot app... Go to Settings (top right corner of main screen in the app); Check firmware (it'll say you have new firmware, would you like to upgrade to v.1.3.0.... you say OK. It downloads via WiFi and shoots it to your Ninebot Mini Pro (make sure you have your Ninebot turned ON and connected via Bluetooth). And THAT's IT! All done. Note: I turned OFF my mobile data as suggested in the instructions. Whole process in the "lazy" method took no more 4-5 minutes including the time it took to download the firmware into the Ninebot. Want to say a BIG THANKS to Deniss and Alexander for restoring not just my Ninebot but my sanity! And a BIG F@ck You Ninebot! No way I'm gonna upgrade firmware from you again! Took it for a test ride and I can absolutely confirm the original ride characteristics are back!! No more beeping unless I actually go over 18km/h. No more beeping if I accelerate quickly. No more beeping going backwards. No more tilting backwards while you're going uphill. No more beeping after to go over bumpy ground. Edited June 20, 2016 by EW-SG 1 Quote Link to comment Share on other sites More sharing options...
GodLy Posted June 26, 2016 Share Posted June 26, 2016 Make sure when you are doing downgrade to disable any other bluetooth devices that are connected to your phone..Such as smartwatch, speakers and so on. Quote Link to comment Share on other sites More sharing options...
MC.TGN Posted June 27, 2016 Share Posted June 27, 2016 After downgrading to 1.1.7, I can ride it to a toilet in time again! Thanks to Mr.Dennis for your help. :-) 2 Quote Link to comment Share on other sites More sharing options...
GodLy Posted June 27, 2016 Share Posted June 27, 2016 Now we need custom firmware to bypass all speed limits.. and see how fast we can go! 2 Quote Link to comment Share on other sites More sharing options...
John Eucist Posted June 27, 2016 Share Posted June 27, 2016 Just now, GodLy said: Now we need custom firmware to bypass all speed limits.. and see how fast we can go! and faceplant? Quote Link to comment Share on other sites More sharing options...
GodLy Posted June 27, 2016 Share Posted June 27, 2016 (edited) I have money for that too. p.s anyway there will be custom firmware's for sure.. It is just matter in time 4 minutes ago, John Eucist said: and faceplant? Â Edited June 27, 2016 by GodLy Quote Link to comment Share on other sites More sharing options...
John Eucist Posted June 27, 2016 Share Posted June 27, 2016 (edited) With good protective gear and a full face helmet I suppose one can experiment. However, I'm pretty sure the speed limits are there because the BMS will suddenly cut power on the motor not too much faster than your original 1.1.7 max speed limits (whatever that is). Although, I suppose, if it cuts the motor at less than 25 km/h you can "run it off" if you're prepared. Higher than that would be risky. Edited June 27, 2016 by John Eucist Quote Link to comment Share on other sites More sharing options...
GodLy Posted June 27, 2016 Share Posted June 27, 2016 (edited) 1 hour ago, John Eucist said: With good protective gear and a full face helmet I suppose one can experiment. However, I'm pretty sure the speed limits are there because the BMS will suddenly cut power on the motor not too much faster than your original 1.1.7 max speed limits (whatever that is). Although, I suppose, if it cuts the motor at less than 25 km/h you can "run it off" if you're prepared. Higher than that would be risky. ~25 km/h is the speed i am looking for Edited June 27, 2016 by GodLy Quote Link to comment Share on other sites More sharing options...
John Eucist Posted June 27, 2016 Share Posted June 27, 2016 2 minutes ago, GodLy said: ~25 km/h is the speed i am looking for What is the fastest speed allowed for the ninebot mini at the "fastest speed firmware"? Quote Link to comment Share on other sites More sharing options...
GodLy Posted June 27, 2016 Share Posted June 27, 2016 (edited) 3 minutes ago, John Eucist said: What is the fastest speed allowed for the ninebot mini at the "fastest speed firmware"? I think 18km/h but i can be wrong.. Then he starts beep and raise you back.. Edited June 27, 2016 by GodLy Quote Link to comment Share on other sites More sharing options...
John Eucist Posted June 27, 2016 Share Posted June 27, 2016 1 minute ago, GodLy said: I think 18km/h but i can be wrong.. Then he starts beep and raise you back.. Get an electric unicycle. Most good ones can do at least 30 km/h now. Quote Link to comment Share on other sites More sharing options...
GodLy Posted June 27, 2016 Share Posted June 27, 2016 1 minute ago, John Eucist said: Get an electric unicycle. Most good ones can do at least 30 km/h now. Yeah speed is really good! Next time will try unicycle for sure! 1 Quote Link to comment Share on other sites More sharing options...
Jojo33A Posted June 27, 2016 Share Posted June 27, 2016 2 hours ago, John Eucist said: Get an electric unicycle. Most good ones can do at least 30 km/h now.  2 hours ago, GodLy said: I think 18km/h but i can be wrong.. Then he starts beep and raise you back.. max speed for me was 20.9km/h russian is over 27km/h (i guess vodka and soyuz engine inside) chinese 21.2km/h    2 Quote Link to comment Share on other sites More sharing options...
tonywang Posted June 27, 2016 Share Posted June 27, 2016 On 6/12/2016 at 9:45 PM, Denniss2 said: Please inform people in china! I have tried to write to bbs.xioami in the ninebot forum but had no success. Hi Denniss2Â I have changed the dns server and check updates.It always couldn't find the 1.3.0 firmware . what's wrong ? Quote Link to comment Share on other sites More sharing options...
Jojo33A Posted June 27, 2016 Share Posted June 27, 2016 3 hours ago, tonywang said: Hi Denniss2Â I have changed the dns server and check updates.It always couldn't find the 1.3.0 firmware . what's wrong ? Hello try with DNS1 and DNS 2 too 1 Quote Link to comment Share on other sites More sharing options...
joo Posted June 28, 2016 Share Posted June 28, 2016 Hey it seems like it doesn t work with the DNS, i tried it on my IOS yesterday and today i tried on a android and with another wifi. do both don t work. the app can not find the new version. WHO CAN HELP? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.