Hansolo Posted March 3, 2018 Share Posted March 3, 2018 I do not know, but for my MS3 I bought LED strip for MCM4 and I cut the LED too (only 5 for the MS3) Link to comment Share on other sites More sharing options...
Zap Posted March 3, 2018 Share Posted March 3, 2018 3 hours ago, Hansolo said: I do not know, but for my MS3 I bought LED strip for MCM4 and I cut the LED too (only 5 for the MS3) This for the information. Maybe the led strip is generic. I’ll go try my local shop to c if they can help. Link to comment Share on other sites More sharing options...
Marty Backe Posted March 3, 2018 Share Posted March 3, 2018 8 hours ago, Zap said: Does the MS3 use the same leh as the mten3 ? No. If you feel like experimenting, you can open the shell and you'll see that where the wires from the control join the LED strip, it's very fragile. One of the three wires may have broke, and you could perhaps solder it back. Link to comment Share on other sites More sharing options...
Hansolo Posted March 3, 2018 Share Posted March 3, 2018 6 hours ago, Zap said: This for the information. Maybe the led strip is generic. I’ll go try my local shop to c if they can help. Yes it's generic but I don't find led stip with silicone enclosure to replace mine (without silicone it's easy to find) Link to comment Share on other sites More sharing options...
Zap Posted March 4, 2018 Share Posted March 4, 2018 14 hours ago, Marty Backe said: No. If you feel like experimenting, you can open the shell and you'll see that where the wires from the control join the LED strip, it's very fragile. One of the three wires may have broke, and you could perhaps solder it back. Will look into this option Link to comment Share on other sites More sharing options...
Hunka Hunka Burning Love Posted April 16, 2018 Share Posted April 16, 2018 On 2018-03-03 at 2:32 PM, Hansolo said: Yes it's generic but I don't find led stip with silicone enclosure to replace mine (without silicone it's easy to find) You can probably buy a tube of clear silicone like DAP clear, and apply it over the strip. I was just curious - does anyone know what Gotway did to fix the Mten3 battery common nickel strip melting issue? Did they swap out the battery packs with a thicker jumper strip or add thick wiring? Link to comment Share on other sites More sharing options...
Hansolo Posted April 16, 2018 Share Posted April 16, 2018 Be carrefull to use Silicone for electronic else the The electrical circuit will be cut. Link to comment Share on other sites More sharing options...
Hunka Hunka Burning Love Posted April 16, 2018 Share Posted April 16, 2018 Sorry you are correct. Best to use a silicone sealant that does not release acetic acid as a byproduct, or it might corrode electronic components. http://www.americansealantsinc.com/388-electronic-grade-silicone/ Link to comment Share on other sites More sharing options...
Zap Posted May 25, 2018 Share Posted May 25, 2018 Just an update. Gotway warranties the led light . Took more then a month for it to arrive. Did a diy while changing the out the stock tire. Led running fine now Link to comment Share on other sites More sharing options...
Zap Posted May 25, 2018 Share Posted May 25, 2018 On 5/7/2018 at 4:56 PM, Leonte Mihai said: Hi guys, some of you have two packs of batteries for sale, 800wh 84.2 V from some ACM 1600 or Msuper V3 1600 or Monster. And someone can give me the dimensions (length, width, height, weight) and number of cells of a battery pack (from 800Wh, 84.2V). Hi , r u planing to switch out to a bigger capacity battery? please update if u manage to sort that out . Tks Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.