TheNotoriousEUC Posted August 5, 2023 Share Posted August 5, 2023 28 minutes ago, GitDatPC said: Do you have a screenshot of where those settings display in the app? Hit the settings icon of the main screen (upper right corner). On the settings screen one will see “Operating Mode.” 1 Quote Link to comment Share on other sites More sharing options...
GitDatPC Posted August 5, 2023 Share Posted August 5, 2023 23 minutes ago, TheNotoriousEUC said: Hit the settings icon of the main screen (upper right corner). On the settings screen one will see “Operating Mode.” Is your Begode app version 1.0.13? That's my version after "I think" I updated it. Quote Link to comment Share on other sites More sharing options...
GitDatPC Posted August 5, 2023 Share Posted August 5, 2023 NOW it's updated. The firmware update works a lot more seamlessly now lol 1 Quote Link to comment Share on other sites More sharing options...
eezo Posted August 5, 2023 Share Posted August 5, 2023 (edited) 14 minutes ago, GitDatPC said: Is your Begode app version 1.0.13? That's my version after "I think" I updated it. My guess is that Begode may not have updated the Android app yet so while the firmware may support the new modes, the app doesn't have the ability to control them yet until it's updated. If you find a way to get the latest firmware on your wheel along with the ability to control the new settings from the app, let me know (and which firmware you picked from the list). Edited August 5, 2023 by eezo Quote Link to comment Share on other sites More sharing options...
GitDatPC Posted August 5, 2023 Share Posted August 5, 2023 13 minutes ago, eezo said: My guess is that Begode may not have updated the Android app yet so while the firmware may support the new modes, the app doesn't have the ability to control them yet until it's updated. If you find a way to get the latest firmware on your wheel along with the ability to control the new settings from the app, let me know (and which firmware you picked from the list). Get Begode app 1.0.15 from their Facebook post 👍 Firmware update is a snap after that. https://www.facebook.com/groups/ElectricUnicycle/permalink/6444070605690848/?mibextid=2JQ9oc 2 1 Quote Link to comment Share on other sites More sharing options...
GitDatPC Posted August 5, 2023 Share Posted August 5, 2023 Anyone else seeing this "Battery Status: Over Temperature" in the updated Begode app? Quote Link to comment Share on other sites More sharing options...
Felipe Alberto Dantas Posted August 5, 2023 Share Posted August 5, 2023 like some of you, I have some problems with the update. The screen no longer flashes when the wheel is charging. Darknesbot no longer works. Very weird noise in race mode. Quote Link to comment Share on other sites More sharing options...
Felipe Alberto Dantas Posted August 5, 2023 Share Posted August 5, 2023 Il y a 11 heures, GitDatPC a déclaré : Darknessbot a tout qui tourne maintenant après s'être connecté. how did you solve this problem? Quote Link to comment Share on other sites More sharing options...
GitDatPC Posted August 5, 2023 Share Posted August 5, 2023 5 minutes ago, Felipe Alberto Dantas said: how did you solve this problem? We'll have to wait until the Darknessbot app is updated to support the new firmware revisions. Otherwise, you can flash back to the old firmware using the previous Begode app version 1.0.13 and selecting "JN Commander Pro" from the list of updates. That fixed Darknessbot for me 👍 Quote Link to comment Share on other sites More sharing options...
Felipe Alberto Dantas Posted August 5, 2023 Share Posted August 5, 2023 1 hour ago, GitDatPC said: We'll have to wait until the Darknessbot app is updated to support the new firmware revisions. Otherwise, you can flash back to the old firmware using the previous Begode app version 1.0.13 and selecting "JN Commander Pro" from the list of updates. That fixed Darknessbot for me 👍 you can't downgrade the wheel's firmware. To opload the jn2012204 the application downloads the firmware to 100%. To return to firmware Jn2012203 the application blocks the download in 1%. does your screen show the exact charge level after the update? And does it show the load bar moving while loading? Thanks Quote Link to comment Share on other sites More sharing options...
TheNotoriousEUC Posted August 5, 2023 Share Posted August 5, 2023 8 hours ago, GitDatPC said: Anyone else seeing this "Battery Status: Over Temperature" in the updated Begode app? I am seeing it but it isn’t what it is for the Extreme. It appears the Begode Extreme gives individual battery health as well. 1 Quote Link to comment Share on other sites More sharing options...
Dr.E.U.C Posted August 5, 2023 Share Posted August 5, 2023 (edited) My CP has been charging since 4 hours ago, the red light has turned on, and it is at 100% (133.7 v). Is there any issue related to the new firmware? Before upgrade, charger went to green light at 100%. The charger is green now; maybe it was taking some more time because of balancing the cells. Edited August 5, 2023 by Mauricio 1 Quote Link to comment Share on other sites More sharing options...
eezo Posted August 6, 2023 Share Posted August 6, 2023 21 hours ago, Mauricio said: My CP has been charging since 4 hours ago, the red light has turned on, and it is at 100% (133.7 v). Is there any issue related to the new firmware? Before upgrade, charger went to green light at 100%. The charger is green now; maybe it was taking some more time because of balancing the cells. Mine started showing 100% in Begode app / EUC world at around 131v with charger red. It's still charging and is up to 132.4v now, still red, still 100%. Is this normal charging behavior for this wheel? Quote Link to comment Share on other sites More sharing options...
Mike Sacristan Posted August 6, 2023 Share Posted August 6, 2023 On 8/4/2023 at 10:19 PM, eezo said: Anyone else experience a "choppy" or "notchy" sound when rolling at very low speeds? Sound started today after a leisurely ~2mi ride at around 10mph. It sounded like the motor wasn't smoothly applying power, it was jerky. After power cycling the wheel, it went away and rolls again like it used to. This happened to me once on my EX30. I had disengaged the motor and had it on the kickstand. Still on but with the motor disengaged. When I rode it after that something sure felt weird.. it sort of smoothed out at speed but I spent a good 10 minutes trying to figure out what I was feeling. I could feel a roughness and cogging of the motor. I remembered what I had done with the motor disengaged and it on it's kickstand. Something I don't normally do. So I power-cycled it and the problem went it away and that was that. I haven't tried recreating the issue but that seemed to be the cause. I don't know if this is relevant at all for the Commander Pro because I don't even know if it has a motor disengage feature. But as a sanity check... you are not alone in what happened. 2 1 Quote Link to comment Share on other sites More sharing options...
BKW Posted August 6, 2023 Share Posted August 6, 2023 (edited) I just did the firmware update after updating begode app on iphone... So, huh, is "off rode rode" mean more torque and less high-end? And racing mode means less torque but more high-end? Which do you guys like better? P.S: Race mode sounds like I have a radiator inside my CP lol Edited August 6, 2023 by BKW Quote Link to comment Share on other sites More sharing options...
GitDatPC Posted August 6, 2023 Share Posted August 6, 2023 7 minutes ago, BKW said: I just did the firmware update after updating begode app on iphone... So, huh, is "off rode rode" mean more torque and less high-end? And racing mode means less torque but more high-end? Which do you guys like better? P.S: Race mode sounds like I have a radiator inside my CP lol I can test the race mode top end once I can reliably read the PWM. 50 MPH GPS had me at 93% PWM on the old firmware. That'd be sweet if we can go 55 MPH now 😁 1 Quote Link to comment Share on other sites More sharing options...
GitDatPC Posted August 6, 2023 Share Posted August 6, 2023 (edited) Is this 'Power alarm' equivalent to PWM? Edited August 6, 2023 by GitDatPC Quote Link to comment Share on other sites More sharing options...
TheNotoriousEUC Posted August 6, 2023 Share Posted August 6, 2023 Went on a nice ride this morning. Hadn’t been able to hop on the wheel since last weekend so I was pretty happy. Being happy coupled with my ADHD, I completely forgot about the firmware update and Race Mode. What I did experience is a lot more wobbling. I’ve been out in more wind so I don’t think it was that. I typically get them during hard braking but today I was getting them a lot while accelerating as well as braking. Just curious if it’s a me thing or could it be a firmware thing? 1 Quote Link to comment Share on other sites More sharing options...
GitDatPC Posted August 6, 2023 Share Posted August 6, 2023 37 minutes ago, TheNotoriousEUC said: Went on a nice ride this morning. Hadn’t been able to hop on the wheel since last weekend so I was pretty happy. Being happy coupled with my ADHD, I completely forgot about the firmware update and Race Mode. What I did experience is a lot more wobbling. I’ve been out in more wind so I don’t think it was that. I typically get them during hard braking but today I was getting them a lot while accelerating as well as braking. Just curious if it’s a me thing or could it be a firmware thing? It could be the acceleration differences throwing your balance off slightly. I think I've experienced that as well. But, I just swapped my pads the day of the firmware update so my experience is skewed a little lol 1 Quote Link to comment Share on other sites More sharing options...
Popular Post GitDatPC Posted August 6, 2023 Popular Post Share Posted August 6, 2023 2 hours ago, GitDatPC said: Is this 'Power alarm' equivalent to PWM? Yes! The PWM alarm works and I couldn't even get it to beep at 54 MPH GPS at 90% alarm. I dropped it to 80% PWM alarm at 40% battery and got beeps at 44 MPH GPS. Then, beeps at 90% PWM, 48 MPH, 40% battery. I'm recharging to 100% and going to see what the new 90% PWM is ((((😁 I'm guessing 56 MPH. Send me flowers y'all, LOL. I usually ride @93% PWM alarm when Darknessbot was working on the old firmware. That was 50 MPH, 93% PWM, full battery. 3 1 Quote Link to comment Share on other sites More sharing options...
GitDatPC Posted August 7, 2023 Share Posted August 7, 2023 55 MPH, 90% PWM on full battery. Once I can hear 93% PWM in my earbuds again, I should be cruising at 57 MPH 🏁 Race Mode FTW! 3 Quote Link to comment Share on other sites More sharing options...
Rawnei Posted August 7, 2023 Share Posted August 7, 2023 7 hours ago, GitDatPC said: 55 MPH, 90% PWM on full battery. Once I can hear 93% PWM in my earbuds again, I should be cruising at 57 MPH 🏁 Race Mode FTW! I hate to be the guy but riding at 93% PWM is asking for it. 1 1 1 Quote Link to comment Share on other sites More sharing options...
Robse Posted August 7, 2023 Share Posted August 7, 2023 9 minutes ago, Rawnei said: I hate to be the guy but riding at 93% PWM is asking for it. yup! someone's got to keep the figures up in the statistics 😁 1 Quote Link to comment Share on other sites More sharing options...
GitDatPC Posted August 7, 2023 Share Posted August 7, 2023 1 hour ago, Rawnei said: I hate to be the guy but riding at 93% PWM is asking for it. Yes, I try to be as careful as possible but it's still risky 🙂 Quote Link to comment Share on other sites More sharing options...
Popular Post BKW Posted August 8, 2023 Popular Post Share Posted August 8, 2023 (edited) So, yeah... I looked under the pedal hanger of my CP and saw the "screw" everyone was supposedly telling me to tighten to fix my floppy pedals. This whole time I thought everyone was talking about the screws that hold in the pedal rod and/or the bolts that hold the hanger to the CP. I never saw a screw under the pedal like that before so I never even bothered looking there (I think I saw a youtube video of it before I even realized it was there)... but yup, just needed to tighten that and I added some loctite as well. Thanks for the earlier suggestion @EMA Edited August 8, 2023 by BKW 4 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.