Solent Posted November 15, 2020 Share Posted November 15, 2020 Hello, Please help. I'm having the exact same issue with both my wheels. I'm an occasional rider and only ride for a couple of hours at the time. I always charge the battery after each ride. My 1st wheel was a 16XS and my current is an S18. My first wheel got replaced for a different wheel (the S18) because the battery died after just a couple of months of riding it. The battery went down to 0% which killed it. I have no idea how this happened and was assuming it was just a faulty battery. Yesterday, I wanted to ride my S18 and no matter how much I held the power button down, the wheel wouldn't start. I plugged the charger in and a little spark with a clicking noise occurred at the socket. The charger blinked red and green and then stayed solid green. I wrote to EWheels (USA) who said to leave it plugged in all night, which I did. This morning I was able to start the wheel but the EUC app says that the battery is at 0%. I don't understand. I'm doing everything accordingly. I always ride with a full battery, never go below 50%, charge it after each ride, and always unplug the charger when it turns green. I've had the S18 for a few months now and did less than 200 miles. Why is this happening again?? 2 Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted November 15, 2020 Share Posted November 15, 2020 What voltage does it display for 0% battery? If you can get it to full and the charger is green, what voltage does it display then? How many km/miles did you have on the 16XS (roughly)? The only thing I can remotely come up with: battery cells need to be balanced regularly (like once a month would be good). That only happens at full charge. Maybe you always removed the charger (when it went green) when it was still too low for that? Keep the charger in for a few hours after it goes green once in a while, to allow for (more) balancing. But I don't think that is it. Even unbalanced cells wouldn't just fail like this and this quickly. This is indeed strange, but it does look like the problem is somehow related to what you do 1 Quote Link to comment Share on other sites More sharing options...
Chriull Posted November 15, 2020 Share Posted November 15, 2020 9 hours ago, Solent said: I don't understand. I'm doing everything accordingly. I always ride with a full battery, never go below 50%, charge it after each ride, and always unplug the charger when it turns green. I've had the S18 for a few months now and did less than 200 miles. Why is this happening again?? Wasn't there some "strange self discharge" with some firmware versions and the 16x? Maybe the S18 has something similar? The S18 with his ?20s3p? battery organization does not have two packs which could be charged independend? And as @meepmeepmayer wrote, battery should be charged a bit longer once the charger shows the green led for balancing (but depends on the charger - most show the green led too early). But this should not cause this problem... Best to stay in contact with ewheels - maybe they find the cause/a solution? 1 Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted November 15, 2020 Share Posted November 15, 2020 8 minutes ago, Chriull said: Wasn't there some "strange self discharge" with some firmware versions and the 16x? Maybe the S18 has something similar? Maybe it's that. I can't imagine anything one could inadvertently do to kill a battery in ~10 charge cycles. 1 Quote Link to comment Share on other sites More sharing options...
Solent Posted November 15, 2020 Author Share Posted November 15, 2020 8 hours ago, meepmeepmayer said: What voltage does it display for 0% battery? If you can get it to full and the charger is green, what voltage does it display then? How many km/miles did you have on the 16XS (roughly)? The only thing I can remotely come up with: battery cells need to be balanced regularly (like once a month would be good). That only happens at full charge. Maybe you always removed the charger (when it went green) when it was still too low for that? Keep the charger in for a few hours after it goes green once in a while, to allow for (more) balancing. But I don't think that is it. Even unbalanced cells wouldn't just fail like this and this quickly. This is indeed strange, but it does look like the problem is somehow related to what you do When the wheel is on, the voltage starts at 45V put keeps on going down. It looses 0.1 every second. I also want to say that I always remove the charger after I check with EUC that the battery is 100%. The 16XS had less than 200 miles as well. It ain't related to something I do since we have 2 other wheels, the Inmotion V11 and Solowheel Glide 3 that get used and charged the same way, and we never had any battery issues with those, or any issues of any sorts. Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted November 15, 2020 Share Posted November 15, 2020 45V is deader than dead (assuming the display is even correct with such values). No idea why this is happening to you. I guess all you can do is return the wheel or have them send you new battery packs. 1 Quote Link to comment Share on other sites More sharing options...
redsnapper Posted November 15, 2020 Share Posted November 15, 2020 S18 is 20s3p is it not? -45v/20=avg 2.25v per cell - way below where these should go. I would think below where bms would prevent you from even charging. @smallexis might have thoughts on this strange situation as he is batt guru. I can't see how anything but a phantom drain on your batt can lead to this. EZ enough to check - charge to full. Check voltage with DMM. Turn on wheel then turn off. Check for voltage drop after 1 day,3 days etc. On ks16x, after charging, if you do not turn on then turn off wheel,btooth module (maybe more) stays awake and would cause some drain if you were not gonna ride for many days. But I can't see anything like draining to 45V etc... @Seba may have useful input as well... 1 Quote Link to comment Share on other sites More sharing options...
mhpr262 Posted November 15, 2020 Share Posted November 15, 2020 Short of leaving a fully charged wheel in a very hot parked car for a couple of hours I cant think of anything that would kill a battery that quickly. Quote Link to comment Share on other sites More sharing options...
Solent Posted November 16, 2020 Author Share Posted November 16, 2020 6 hours ago, amelanso said: I can't see how anything but a phantom drain on your batt can lead to this. EZ enough to check - charge to full. Check voltage with DMM. Turn on wheel then turn off. Check for voltage drop after 1 day,3 days etc. On ks16x, after charging, if you do not turn on then turn off wheel,btooth module (maybe more) stays awake and would cause some drain if you were not gonna ride for many days. But I can't see anything like draining to 45V etc... @Seba may have useful input as well... Unfortunately I can't even charge it. It won't go pass 0%. I'm waiting on Ewheels to answer my email. I'll post their answer/troubleshooting here. Quote Link to comment Share on other sites More sharing options...
Solent Posted November 16, 2020 Author Share Posted November 16, 2020 6 hours ago, mhpr262 said: Short of leaving a fully charged wheel in a very hot parked car for a couple of hours I cant think of anything that would kill a battery that quickly. Nope, I drove it to and from home and charged it my office room. It was never exposed to extreme heat or cold. Quote Link to comment Share on other sites More sharing options...
redsnapper Posted November 16, 2020 Share Posted November 16, 2020 below a certain lvl bms will blk chrging to prvnt cell destructo/ignition etc. so ur machine nvr sat idle for long period? Quote Link to comment Share on other sites More sharing options...
NOSFET Electric Dreams Posted November 16, 2020 Share Posted November 16, 2020 I think it's due to a faulty BMS. eWheels will be able to offer you direct warranty support, I'll esclate this issue. 2 Quote Link to comment Share on other sites More sharing options...
mhpr262 Posted November 16, 2020 Share Posted November 16, 2020 1 hour ago, Jack King Song said: I think it's due to a faulty BMS. eWheels will be able to offer you direct warranty support, I'll esclate this issue. yeah that is the most likely explanation. I had a cheap generic wheel that I left in my basement for three years after an injury took the starch out of me while I was still learning to ride. It wouldnt charge after that either. When I removed the battery pack twelve of the sixteen cells were perfectly fine at 3.7V, but four cells, all next to each other, were completely dead. Quote Link to comment Share on other sites More sharing options...
Solent Posted November 17, 2020 Author Share Posted November 17, 2020 On 11/15/2020 at 10:12 PM, Jack King Song said: I think it's due to a faulty BMS. eWheels will be able to offer you direct warranty support, I'll esclate this issue. Thank you!!! Quote Link to comment Share on other sites More sharing options...
Solent Posted November 17, 2020 Author Share Posted November 17, 2020 On 11/15/2020 at 9:49 PM, amelanso said: below a certain lvl bms will blk chrging to prvnt cell destructo/ignition etc. so ur machine nvr sat idle for long period? Nope. Less than 2 weeks... Quote Link to comment Share on other sites More sharing options...
Otaku Posted January 28, 2021 Share Posted January 28, 2021 Like OP Solent, I'm only an occasional rider, a beginner at best. I started with the S18 preordered and everything has been great until this morning. I wanted to ride my S18 but no matter how much I held the power button down, the wheel wouldn't start. I plugged the charger in and a little spark with a clicking noise occurred at the socket. The charger blinked red and green and then stayed solid green. The app says it was charging over voltage and that it was dead but I fully charged it like 2 weeks ago and it's just been sitting in my room. Repeat and it clicks again, flashes and now stays red. I now have charge but it won't move or balance... Darknessbot diagnostics all looked normal but I can get anything but the headlight to work.. any suggestions would be much appreciated.. 1 Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted January 28, 2021 Share Posted January 28, 2021 43 minutes ago, Otaku said: any suggestions would be much appreciated Contact your seller. Not your job to fix a brand new wheel. What voltage does the app show? Quote Link to comment Share on other sites More sharing options...
Scubadragonsan Posted January 28, 2021 Share Posted January 28, 2021 (edited) I don't know if this is your issue similar to what happened to my KS16X. After completed charging my KS16X, several days later I found 16X battery is drained. Then I found out that after charging and unplugging 16X, there is a light inside that would continuously blink and that's what drained the battery. To prevent the battery drain, after completed charging, I would have to power the wheel on once and then turn off before I put the wheel away. I don't know why this extra step is necessary, but that's the way it is. Hope your issue is the same! https://forum.electricunicycle.org/topic/20300-end-of-charge-battery-drain-workarounds/?do=findComment&comment=360218 Edited September 28, 2022 by RagingGrandpa (added URL for others) 3 Quote Link to comment Share on other sites More sharing options...
FJAM Posted September 28, 2022 Share Posted September 28, 2022 Hi. I’m having the same issue. What was your solution? 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.