Finn Bjerke Posted October 12, 2020 Posted October 12, 2020 (edited) Spanking new wheel with 72% jiuce on it - died on me after 28 km. Planned trip was 30 km. Go home mode did not work (EUC world) . I dont know what I have done wrong here. Will try range test from 100% to morrow. After 28 km I was tilted off most brutally and the bloody wheel was in tiltmode and said get off me..... Theory: The wheelæ is riding on 1 battery only ?= Can I diagnose that some way or other ? Edited October 12, 2020 by Finn Bjerke better more Quote
gon2fast Posted October 12, 2020 Posted October 12, 2020 (edited) I believe that you can monitor charging/status on each battery pack if you activate the app once the V11 is charging. It is under vehicle information then choose battery pack detailed information. Edited October 12, 2020 by gon2fast 1 Quote
Seba Posted October 13, 2020 Posted October 13, 2020 8 hours ago, Finn Bjerke said: Go home mode did not work (EUC world) . Have you pressed handle button after activating "go home" mode from app? Quote
Finn Bjerke Posted October 13, 2020 Author Posted October 13, 2020 (edited) Thx for good info friends. I have no idea about battery imbalance... Quote 17 hours ago, Finn Bjerke said: Go home mode did not work (EUC world) . Have you pressed handle button after activating "go home" mode from app? Yes I think I have. The bloody thing tilted a lot UC. DUF ... cool dude. IUll check it out. GODDAM I rode 5 km fully charged wheel ... ... the V11 now shows 90% Battery 1 voltage 81.5V work status normal Battery 2 voltage 81.7V work status normal Edited October 13, 2020 by Finn Bjerke Quote
Unventor Posted October 13, 2020 Posted October 13, 2020 I suggest you use Inmotion App and do a diagnoce. Then upload it and then reach out to Liam from Inmotion on telegram. He will get the engineers to analyse the uploaded log. They can give you answers you need. 1 Quote
Motion Posted December 21, 2020 Posted December 21, 2020 My diagnosis says everything is fine. Batt 1 shows operating at 62 V and is disabled. Batt 2 shows operating at 83 V and is enabled. Can anyone help? My range is very low... died at 28 km. Quote
meepmeepmayer Posted December 22, 2020 Posted December 22, 2020 On 12/21/2020 at 12:28 PM, Motion said: My diagnosis says everything is fine. Batt 1 shows operating at 62 V and is disabled. Batt 2 shows operating at 83 V and is enabled. Can anyone help? My range is very low... died at 28 km. Looks like you have a dead battery pack. Since it's a brand new wheel, contact your seller. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.