null Posted November 22, 2020 Share Posted November 22, 2020 (edited) Deleted because I do not wish to contribute to a forum that accepts racism. Edited July 6 by null 1 Quote Link to comment Share on other sites More sharing options...
Yoyo Posted November 23, 2020 Share Posted November 23, 2020 I have also seen this model on aliexpress, it's exactly what I want. A wheel without bullshit. But I don't know if it's legit. It's not on eny of gotway/begode website. Does anyone have eny information? 2 Quote Link to comment Share on other sites More sharing options...
Popular Post RagingGrandpa Posted November 23, 2020 Popular Post Share Posted November 23, 2020 (edited) I've been in touch with two sellers and believe it's like this: C30 motor (from original MSX) 84V 1600wh 18650 battery (from original MSX) Dual headlamp (from MSP) 2.5" wide tire (MSX was 3"; ez to swap) No light strips So it's just an 84V MSX at heart. (2500w is the continuous power rating, which is an arbitrary number. This motor is electrically identical to the C30 that debuted in 2018 with the 84V MSX.) Nice to have a value option. Quote Battery:Origina1600WH 2021 Newest Gotway Msuper X Major Changes: Motor 2000W, changed to 2500W, no-load speed 79km/h, C30 motor, maximum speed 60km/h+ Battery: 1600WH, still using the best performance and most stable NCR18650GA Sanyo battery Headlight: Change from single light to double headlight Ambient light: canceled (too many problems, easy to enter water and cause motherboard problems) Edited April 28, 2021 by RagingGrandpa not hollowcore 4 Quote Link to comment Share on other sites More sharing options...
Popular Post One Wheel Man Posted November 23, 2020 Popular Post Share Posted November 23, 2020 Yep, people focus SO much on how many watts the motor is on these things....but the number is in fact, pretty arbitrary if there's no objective test all the manufacturers are using to determine the number. Can it handle that amount of power continuously for a certain amount of time without overheating? Under what conditions? I had a hub motor from an ebike and a 1,500 watt kit...I ran 6,000 watts through it without destroying it and went over 50mph....but running full power too long would have likely burnt it....but you could potentially kill a "2,000 watt" motor with 2,000 watts if you tried to pull a truck with your EUC for a long time and stalled it. But the numbers don't mean much when you have all of these manufacturers slapping numbers on wheels with no agreed upon method of determining them. Also, it's the controller that will determine how much power actually goes to the motor. I could get a "10,000 watt motor" and hook it up to a 200 watt controller, and I'd only have 200 watts of power available, because the motor itself isn't drawing any power from the battery....that's all the controller....then the battery just has to be strong enough to handle the power the controller demands, or it can be a bottleneck. So yeah, arbitrary motor power numbers do not tell the entire story and they get too much emphasis. 5 Quote Link to comment Share on other sites More sharing options...
Fox Posted November 24, 2020 Share Posted November 24, 2020 (edited) I saw models like this too, on aliexpress as well as chicway shop, I was hoping it was 84v and HT motor I have never been on a fast wheel yet, (I own slow and crappy wheels) and that's not a big draw, safety is though and torque would be nice. I guess abundant speed is also a safety margin. One thing of note, Is they do sometimes brand C30 motors and C38 motors in the MSP HS and MSP Torque as well respectively, so what I think you get here is the MSP HS, with leftover 84v battery. Because it has the newer headlights and pedals, I don't think it would cannibalize its sales of the RS with the hollow motor just yet, as well as it would probably take more effort to get the older frame to work nicely. Either way I think it may be a win for me, currently deciding between that at 1975 cad, MSP Torque at 2375, MCM5v2 at 1200 and Tesla v2 at 1425 and cant make up my mind. Just want a all rounder for pleasure use slower speeds. Edited November 24, 2020 by Fox Relevant research/opinions 2 Quote Link to comment Share on other sites More sharing options...
RagingGrandpa Posted November 24, 2020 Share Posted November 24, 2020 (edited) On 11/24/2020 at 1:08 AM, Fox said: I was hoping it was 84v and HT motor That won't happen- it would be unsafe (too weak) at 30mph. We need 100V systems in order to use the C38 motor at 'modern' speeds, which is why it's only found in 100V wheels. On 11/24/2020 at 1:08 AM, Fox said: currently deciding between [MSX] at 1975 cad, MSP Torque at 2375, MCM5v2 at 1200 and Tesla v2 at 1425 and cant make up my mind. Just want a all rounder for pleasure use slower speeds. The prices of those wheels correspond to their usefulness- pay more, get more. Since you're not a first-time rider, my recommendation is the most expensive one, sorry (MSP C38) Edited August 24, 2021 by RagingGrandpa Quote Link to comment Share on other sites More sharing options...
ICEMAN Posted December 15, 2020 Share Posted December 15, 2020 The new V2 is not use the hollow motor, it's using the old c30 2500 watt motor. 1 Quote Link to comment Share on other sites More sharing options...
Howes Feng Posted December 15, 2020 Share Posted December 15, 2020 On 11/23/2020 at 9:52 PM, Yoyo said: I have also seen this model on aliexpress, it's exactly what I want. A wheel without bullshit. But I don't know if it's legit. It's not on eny of gotway/begode website. Does anyone have eny information? It's legit and original from Begode manufacturer not modified wheel. This model is exclusive produce in Chicway so it doesn't show on begode website. Quote Link to comment Share on other sites More sharing options...
Fox Posted December 15, 2020 Share Posted December 15, 2020 So, which motor was that from then a 2500watt non hollow motor? was it the 100v MSUPER (pro) Speed version now running on a 84v platform? I can't think of many c30 motors being 2500 nominal before the RS hollow motors and the 100v MSPro 2500w c38 motor. Really interested in finding out more about this model. Especially if it has the older reliable motor. Thanks Quote Link to comment Share on other sites More sharing options...
RagingGrandpa Posted December 15, 2020 Share Posted December 15, 2020 (edited) 7 hours ago, Fox said: the older reliable motor Reliable until you start jumping... 12 hours ago, ICEMAN said: The new V2 is not use the hollow motor, it's using the old c30 2500 watt motor. There was never a C30 stub-axle motor marketed with that continuous power rating... but as we've discussed, that rating is meaningless... Did anyone receive this new MSX yet? Edited December 15, 2020 by RagingGrandpa 3 Quote Link to comment Share on other sites More sharing options...
Fox Posted December 17, 2020 Share Posted December 17, 2020 I am honestly so tempted to get it, but I am the worst person to review it if I did. It would be my first real performance wheel. My Icewheel, and poor shape battery Ninebot E+ don't count for much. Only thing holding me back really is the new T3 being about 300 cheaper (CAD) , in some aliexpress stores, hopefully would have better bearings, It could be a great wheel too, and now its 1500wh but still low pedals and skinny tire. I should probably just get the msx though, a proven wheel for the most part. (It's going to be a long time before I would be wanting to jump it) Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted December 17, 2020 Share Posted December 17, 2020 On 12/15/2020 at 3:48 PM, RagingGrandpa said: There was never a C30 stub-axle motor marketed with that continuous power rating... Yea, that's the mystery here. MSP HT motor was rated 2500W I believe. MSP HS motor is just the MSX motor I believe. Rated at 2000W. - Looks to me that Gotway (I understand that these wheels are manufactured by GW for Chicway, right?) just gets rid of their leftover older parts (MSX 84V boards, 2.5 inch tires?) this way, by making Frankenstein wheels. Maybe their latest firmware, adapted to 84V instead of 100V, gives the old MSX motor 2500W rating instead of 2000W. After all, that seems to be how they come up with their arbitrary power ratings. Quote Link to comment Share on other sites More sharing options...
meepmeepmayer Posted December 17, 2020 Share Posted December 17, 2020 33 minutes ago, Fox said: I am honestly so tempted to get it, but I am the worst person to review it if I did. It would be my first real performance wheel. You don't have to review it. Just enjoy it Seems to be a 84V MSX with some upgrades (somewhere those 2500W must come from). A great wheel, no matter the details. If the price is right and that's the kind of ride you want... As you mention fun at lower speed: smaller tires are more zippy, naturally, and your options go like this, from small to big: real 16 incher - Tesla "16 incher" - Nikola, 16X This one with a 18x2.5 tire MSX/MSP/RS with a 18x3 tire 1 Quote Link to comment Share on other sites More sharing options...
Tom384 Posted January 1, 2021 Share Posted January 1, 2021 Hallo, that is my firs post on this forum. Pls excuse my poor english. I use a chance to order this type from ali. I unpacked couple minits ago and there is my concerns: 1) I hoped that this EUC will have 3inch tire. I have just 2.5inch. Not big issue, it can be replaced. 2) I hoped that it will be equpped with new 2.8A charger. It has traditional 1.5A. 3) I hoped that it will not have hollow bore motor. It seems to be, .... wait for it .... . I did not topen it, but there is visible (throw space between plastic cover nad wheel) rounded shaft that is leading from motor. Correct me if i'm wrong, but hollow motor is not connected to pedals by ronded schaft. If there is an quetions regarding this type of MSX, i'm open to answer. 3 Quote Link to comment Share on other sites More sharing options...
RagingGrandpa Posted January 4, 2021 Share Posted January 4, 2021 (edited) On 1/1/2021 at 9:43 AM, Tom384 said: there is visible rounded shaft that is leading from motor Yup, sounds like the classic non-hollow-core stub shaft design, like the MSX shown below (pardon the dirt): Which tire was installed? (Could you post a photo of its markings?) And if you ever have the right-side cover open, we'd love a photo inside there- the MSX and MSP controllers are mounted vertically; RS was horizontal. Thx Edited January 4, 2021 by RagingGrandpa 1 Quote Link to comment Share on other sites More sharing options...
Tom384 Posted January 4, 2021 Share Posted January 4, 2021 (edited) Let me know if link works: http://gofile.me/3rWoI/6Yh4k0hd5 My opinion is that it is standard MSX with thiner tire, double led light without led strips. Edited January 4, 2021 by Tom384 2 Quote Link to comment Share on other sites More sharing options...
RagingGrandpa Posted January 5, 2021 Share Posted January 5, 2021 (edited) Got it- I'll host a gallery below: Tire is a good ole C-1488, just the 2.5" size like KS18L sometimes has. And MSuper remains the easiest wheel to open and change the tire without disconnecting wires, like you said. Glad to see a real fullsize "value" wheel available in 2021! Edited January 5, 2021 by RagingGrandpa 2 Quote Link to comment Share on other sites More sharing options...
Tom384 Posted January 5, 2021 Share Posted January 5, 2021 One question. Weight of my MSX is just 23kg. There is declared that weight shoul be 23.5kg. That seems to be strange to me and I'm looking what is the reason of this difference. That was also a reason that i open the shell because i was woried that i got wersion with smaller battery. Is this weight standard? Quote Link to comment Share on other sites More sharing options...
RagingGrandpa Posted January 5, 2021 Share Posted January 5, 2021 All sounds normal to me... But it's a good excuse to get a smartplug and use EUC World's new recharging monitor. If you ride your EUC till it tilts your back at 0% battery, then fully recharge, you should see just over 1300wh delivered during charging (for the 1600wh battery, which Gotway never completely drains). Quote Link to comment Share on other sites More sharing options...
Tom384 Posted January 5, 2021 Share Posted January 5, 2021 Thanks for reply. I will try to manage current probe and monitor charging process. There is just one issue that I'm new in EUC word and i'm roling on the ground more than riding on EUC :-) so it will take some time to drain battery. Quote Link to comment Share on other sites More sharing options...
RiderJ Posted January 21, 2021 Share Posted January 21, 2021 I consider to buy one too. It is 250 euros cheaper than MSuper PRO 100v from local dealer. For me speakers are not necessary. MSX is also lighter then MSP and this is an advantage for me. And now I am struggling which to choose...? Quote Link to comment Share on other sites More sharing options...
RagingGrandpa Posted January 21, 2021 Share Posted January 21, 2021 The 100V MSP C38 has more torque than MSX. If you want to ride mountain bike trails with steep terrain and use lean pads, it's better. The 100V MSP C30 is 10mph faster than MSX. If you want to ride 35mph+, it's your only choice. If you don't care about either situation above, save EUR250 Quote Link to comment Share on other sites More sharing options...
AtlasP Posted January 21, 2021 Share Posted January 21, 2021 (edited) On 11/23/2020 at 3:03 PM, One Wheel Man said: Yep, people focus SO much on how many watts the motor is on these things....but the number is in fact, pretty arbitrary if there's no objective test all the manufacturers are using to determine the number. Can it handle that amount of power continuously for a certain amount of time without overheating? Under what conditions? I had a hub motor from an ebike and a 1,500 watt kit...I ran 6,000 watts through it without destroying it and went over 50mph....but running full power too long would have likely burnt it....but you could potentially kill a "2,000 watt" motor with 2,000 watts if you tried to pull a truck with your EUC for a long time and stalled it. But the numbers don't mean much when you have all of these manufacturers slapping numbers on wheels with no agreed upon method of determining them. Also, it's the controller that will determine how much power actually goes to the motor. I could get a "10,000 watt motor" and hook it up to a 200 watt controller, and I'd only have 200 watts of power available, because the motor itself isn't drawing any power from the battery....that's all the controller....then the battery just has to be strong enough to handle the power the controller demands, or it can be a bottleneck. So yeah, arbitrary motor power numbers do not tell the entire story and they get too much emphasis. Spot on. Basically I treat motor Wattage ratings just like categories: 500W - child's toy 800W - bottom end of passable super-light-weight last-mile commuters for light riders only 1000-1800W - mid-range 22-25mph wheels, bottom end of passable light-weight last-mile commuters for heavier riders 2000+W - high end, sufficient motor wattage that now other non-measured specs (magnet size & spacing, motor radius, windings, etc) become just as, if not more, important as wattage and therefore motor wattage by itself is no longer a reliable indicator of anything Edited January 22, 2021 by AtlasP 2 Quote Link to comment Share on other sites More sharing options...
RiderJ Posted March 7, 2021 Share Posted March 7, 2021 Finally I made a decision and bought MSX from chicway.shop. Shout-out for Howes Feng!!! I got the wheel in just 26 hours after my order in chicway.shop! 1 Quote Link to comment Share on other sites More sharing options...
Boris Lämpel Posted March 18, 2021 Share Posted March 18, 2021 So what is the difference to the standard? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.