maxpower Posted May 30, 2016 Share Posted May 30, 2016 Does anybody know if there is a handlebar (hand) steering for the Ninebot Mini Pro , Banggood is selling for the mini but not for the pro , does anybody know how get a similiar for the Mini pro, i heard it works very well for the basic mini version http://www.banggood.com/Original-Xiaomi-Ninebot-Stand-up-Electric-Scooter-Trolley-Handbar-with-Cell-Phone-Holder-p-1050361.html Link to comment Share on other sites More sharing options...
John Eucist Posted May 30, 2016 Share Posted May 30, 2016 Please do not post non-euc posts in the euc (one wheel) section. I moved it to the "General forum for hoverboard and two-wheeled self-balancing vehicles." Link to comment Share on other sites More sharing options...
MetricUSA Posted June 2, 2016 Share Posted June 2, 2016 Manpower, all you need to do is deal with two screws, the same on 'both' machines since they Are the same machine...? Link to comment Share on other sites More sharing options...
SaintToll Posted June 16, 2016 Share Posted June 16, 2016 Hello Maxpower, I've found this in Taobao.com. https://world.taobao.com/item/530687138716.htm?spm=a312a.7700714.0.0.bRvgQA#detail I don't know if they sell worldwide but I'll send an e mail to know if they deliver in France and others country. I want this part for my Xiaomi mini ! Link to comment Share on other sites More sharing options...
jarz21 Posted June 23, 2016 Share Posted June 23, 2016 On 5/30/2016 at 4:03 AM, maxpower said: Does anybody know if there is a handlebar (hand) steering for the Ninebot Mini Pro , Banggood is selling for the mini but not for the pro , does anybody know how get a similiar for the Mini pro, i heard it works very well for the basic mini version http://www.banggood.com/Original-Xiaomi-Ninebot-Stand-up-Electric-Scooter-Trolley-Handbar-with-Cell-Phone-Holder-p-1050361.html I have one of these that I had purchased for my headache of a Ninebot (can't reset/ connect via Bluetooth). Great product and definitely adds confidence for a new rider like me. Plus it can hold a smartphone. To be honest, I'm not sure how it would work on a Mini Pro. To install, you have to remove the QR barcode sticker near the top of the stock Ninebot Mini (non-Pro) control arm and remove six bolts with the included hex wrench. Don't if a comparable mounting point exists at the top of the Mini Pro control arm. I guess you could try to find someone who has swapped an adjustable Pro control arm onto their regular Mini and then use that for parts, but that would add cost. Link to comment Share on other sites More sharing options...
Ninebotwalt Posted July 6, 2016 Share Posted July 6, 2016 I do have Handlebars for the Mini Pro on Ebay. (black & white) Search for my Username, or search for: Lenkstange für Ninebot Mini Pro Handlenker Link to comment Share on other sites More sharing options...
Sbortz Posted July 16, 2016 Share Posted July 16, 2016 Ninebotwalt, can you ship to USA?? How much is it? Thanks! Link to comment Share on other sites More sharing options...
Ninebotwalt Posted July 16, 2016 Share Posted July 16, 2016 Sbortz, thanks for your interest in the handlebar for the Mini Pro. Please contact me directly over my official website http://www.vorarlberg-ninebot.at/ (even, if the language is german, I think you will find my contact Email) I think this forum is not the right place to deal with stuff. Thanks, Walt Link to comment Share on other sites More sharing options...
Ninebotwalt Posted August 3, 2016 Share Posted August 3, 2016 I got a message from maxpower (the thread starter) that his Ninebot Mini Pro was unfortunately stolen... He ordered a Handlebar last week, which will be delivered soon. (Within the next 2 days) Anybody here interested to get this black handlebar for the Mini Pro for a reduced price? (-20,- EUR) Let me know within the next 2 days. Then I could manage, that he will not return it to me, instead deliver to you directly, who's interested, to get this handlebar! European buyer prefered! (Because of the shipping cost) Regular price for this "german made" Handlebar is 170,- EUR. (plus shipping cost / plus PayPal fee) US buyers may still contact me directly. Still have a couple of black and white handlebars in stock. A few members here already bought one. Maybe they can post some pictures, and tell how lucky they are with the HQ product? Steve? Joe? Link to comment Share on other sites More sharing options...
jrambonnet Posted August 3, 2016 Share Posted August 3, 2016 I received an email from Ninebot offering a handlebar specifically for the miniPRO today. It's $170. https://9bot-store.com/products/handlebar-kit-for-ninebot-by-segway-minipro?utm_campaign=Ninebot%2Bby%2BSegway%2BMiniPro%2Bwith%2BHandel%2BBar%2BAvailable%2Bin%2Bthe%2BUS_57a26baa597ed70bb67aab3c&utm_medium=email&utm_source=newsletter Link to comment Share on other sites More sharing options...
Ninebotwalt Posted August 4, 2016 Share Posted August 4, 2016 jrambonnet, I don't think, that you got this email from "Ninebot". This website: https://9bot-store.com/pages/disclaimer has nothing to do with Ninebot Inc or Segway Inc. That means, these handlebars are also manufactured probably somewhere in china, to fit to the Ninebot Mini Pro. But they are definately not "original" Ninebot or Segway products. And a second Quick Release Spare part is also not included. You have to use the Original knee steering at all, and put that part on top of this handlebar. You have to remove the Sponge from the knee steering, and assemble the handle. I will post High-res pictures from the "german" handlebar later. You'll see the difference then.... Link to comment Share on other sites More sharing options...
Sbortz Posted August 4, 2016 Share Posted August 4, 2016 I have purchased from Walt. I am in Cincinnati, Ohio, USA. First off, I have had a i2 segway since 2009. Walts Handlebar is ABSOLUTELY amazing. It looks as if it should have came this way. I clicked the link that was recently posted for the $170 handle bar. I can say, with confidence, after seeing that handle bar, Walts handle bar looks and is much MUCH better and in MY opinion, is worth the extra little amount. Not only does this handle bar look very similar to my i2, but operates identically. This makes my MiniPro SO easy to ride and SO easy to simply disconnect and put into my trunk. 5 STARS!!!! I am about to purchase my second handlebar from Walt for our white one. I have attached a picture of the handlebar. THANKS AGAIN WALT!!! Link to comment Share on other sites More sharing options...
alex250874 Posted August 4, 2016 Share Posted August 4, 2016 16 hours ago, Ninebotwalt said: jrambonnet, I don't think, that you got this email from "Ninebot". This website: https://9bot-store.com/pages/disclaimer has nothing to do with Ninebot Inc or Segway Inc. That means, these handlebars are also manufactured probably somewhere in china, to fit to the Ninebot Mini Pro. But they are definately not "original" Ninebot or Segway products. And a second Quick Release Spare part is also not included. You have to use the Original knee steering at all, and put that part on top of this handlebar. You have to remove the Sponge from the knee steering, and assemble the handle. I will post High-res pictures from the "german" handlebar later. You'll see the difference then.... I am not sure what are you talking about but 9Bot Store was listed on Segway.com blog as the first exclusive online distributor. See the screenshot attached or check out segway blog Received my handelbar from 9Bot-store.com Looks great! All metal and very solid. Link to comment Share on other sites More sharing options...
Ace Posted August 11, 2016 Share Posted August 11, 2016 On 8/4/2016 at 2:04 PM, Sbortz said: I have purchased from Walt. I am in Cincinnati, Ohio, USA. First off, I have had a i2 segway since 2009. Walts Handlebar is ABSOLUTELY amazing. It looks as if it should have came this way. I clicked the link that was recently posted for the $170 handle bar. I can say, with confidence, after seeing that handle bar, Walts handle bar looks and is much MUCH better and in MY opinion, is worth the extra little amount. Not only does this handle bar look very similar to my i2, but operates identically. This makes my MiniPro SO easy to ride and SO easy to simply disconnect and put into my trunk. 5 STARS!!!! I am about to purchase my second handlebar from Walt for our white one. I have attached a picture of the handlebar. THANKS AGAIN WALT!!! Is the handlebar adjustable for height? Link to comment Share on other sites More sharing options...
Ninebotwalt Posted August 11, 2016 Share Posted August 11, 2016 1 hour ago, Ace said: Is the handlebar adjustable for height? No. Actually not. It has a fixed lengh: The high from the ground (surface) is 110cm, mounted on the Ninebot Mini Pro - standing upright in balance! So from your Shoe (Sole, Feet) the measure is about 95cm to the top of the handlebar. - You know, the Ninebot Mini Pro has a standing level from about 15cm from surface. 15 + 95 = 110cm Here's a picture of the "german-made" Handlebar: Link to comment Share on other sites More sharing options...
Ace Posted August 12, 2016 Share Posted August 12, 2016 On 8/11/2016 at 2:49 PM, Ninebotwalt said: No. Actually not. It has a fixed lengh: The high from the ground (surface) is 110cm, mounted on the Ninebot Mini Pro - standing upright in balance! So from your Shoe (Sole, Feet) the measure is about 95cm to the top of the handlebar. - You know, the Ninebot Mini Pro has a standing level from about 15cm from surface. 15 + 95 = 110cm Here's a picture of the "german-made" Handlebar: Thanks. I have come across some adjustable versions for children and shorter people. But I am still researching... and getting more confused... https://www.amazon.com/dp/B01J9GIGMY http://www.aliexpress.com/item/Parts-or-accessories-for-smart-electric-scooter-Adjustable-handle-bar-extend-lenthen-for-xiaomi-scooter-no/32664667375.html?spm=2114.10010108.1000013.10.ftgkyY&scm=1007.13339.33317.0&pvid=43811a18-39c5-4057-a670-884ea7d1673e&tpp=1 http://www.aliexpress.com/item/Stretch-flexible-handle-extend-lenthen-for-xiaomi-no-9-mini-parts-for-balance-scooter-wheel-smart/32691695993.html?spm=2114.10010108.1000013.4.tUQb2j&scm=1007.13339.33317.0&pvid=669ad9a0-d0e5-4122-886f-b7e325ec9d03&tpp=1 http://www.ebay.com/itm/Adjustable-Xiaomi-Ninebot-Stand-up-Electric-Trolley-Handbar-WITHOUT-Scooter-/172204192728 http://www.creativeriders.com/3rd-party-handlebar-for-xiaomi-mini-black/ Also, someone mentioned that the following conversion attachment will allow any Ninebot Mini Handlebar to be installed on Ninebot Mini Pros: http://www.ebay.com/itm/-/182225792125 Link to comment Share on other sites More sharing options...
Rich Marmon Posted August 28, 2016 Share Posted August 28, 2016 Sbortz, do you find you need to use a kickstand with the German handlebar? The new Ninebot store carries this but if you buy the kickstand with it, it costs $55 more by the time shipping is added. Do you think the difference is worth it? Thanks. Link to comment Share on other sites More sharing options...
Vik's Posted August 29, 2016 Share Posted August 29, 2016 Looking at those handlebars I can't get out of my mind that the "9bot store"-creature looks like the handlebar/mini has had a stroke at some time! Link to comment Share on other sites More sharing options...
Debnil Chowdhury Posted November 1, 2016 Share Posted November 1, 2016 On 8/11/2016 at 1:49 PM, Ninebotwalt said: No. Actually not. It has a fixed lengh: The high from the ground (surface) is 110cm, mounted on the Ninebot Mini Pro - standing upright in balance! So from your Shoe (Sole, Feet) the measure is about 95cm to the top of the handlebar. - You know, the Ninebot Mini Pro has a standing level from about 15cm from surface. 15 + 95 = 110cm Here's a picture of the "german-made" Handlebar: Walt, I just purchased the German handlebars and went through the calibration step. No matter what I do, it won't balance on its own. Do you need a kickstand for it? Will it not balance on its own like the knee pad? Thanks! Link to comment Share on other sites More sharing options...
Vik's Posted November 1, 2016 Share Posted November 1, 2016 6 hours ago, Debnil Chowdhury said: Walt, I just purchased the German handlebars and went through the calibration step. No matter what I do, it won't balance on its own. Do you need a kickstand for it? Will it not balance on its own like the knee pad? Thanks! That's right. You'll not be able to get mini to balance with a much longer steering bar as it shifting too much weight forward and changes the center of gravity too much. Link to comment Share on other sites More sharing options...
Ninebotwalt Posted November 4, 2016 Share Posted November 4, 2016 Correct Vik's. Thanks for explaination. Couldn't do it better. But Kick-Stands for Mini's are also available. And since a few days I can provide also the Quick Release Spare part in black or white, finally! But to me it seems, the shipping cost for a "little" part is too much. shipping costs the same as the Part itself. - But for european Users, feel free to contact me over my Site or Shop. If someone want to buy Quick Release together with the german handlebar (& Kick-Stand, maybe), the price is more attractive. Walt ninebot.walt.at Link to comment Share on other sites More sharing options...
M4M Posted February 23, 2017 Share Posted February 23, 2017 There are several models of handlebars for MiniPro available on the market. Walt sells the one that is manufactured by KSR Group. I think the price in Europe is about 100+ euro plus VAT. More4Mini Link to comment Share on other sites More sharing options...
Ninebotwalt Posted February 25, 2017 Share Posted February 25, 2017 Correct, Alexey. - Plus shiping Cost! I ship all over the EU, and in some other countries too. Just aks by email! I do also have great prices for the complete Ninebot Mini Pro 320 (Street) plus handlebar + STVO Kit (Lights, Reflectors, Bell) + german TÜV. Price starts at 700,- (+ VAT and shipping) Greetings, Walt http://www.ninebot.walt.at Link to comment Share on other sites More sharing options...
Ninebotwalt Posted July 30, 2017 Share Posted July 30, 2017 My new Online Webshop is finally here! Check it out! Every Model of Ninebot, Handlebars, Accesoirs, simply everything..... https://www.ninebot-shop.at - reliable austrian online shop! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.