Jump to content

The knobbiest knobby - 16 Inch


Tinkererboi

Recommended Posts

On 1/9/2021 at 4:12 PM, Jpd said:

Just put this tire on my 16x. Here is the link if you’re interested. It just barely fits. This tire is about 3 times as heavy and much thicker than the stock tire. Warning, it’s freakin difficult to put on. 

MMG Combo Tire and Inner Tube Size 3.00-12 Front or Rear Knobby Tread, Motorcycle Trail Off Road Dirt Bike Motocross Pit https://www.amazon.com/dp/B06Y1XFW4M/ref=cm_sw_r_cp_api_glc_fabc_dTH-Fb6CB55MX?_encoding=UTF8&psc=1

96966AC3-581A-461C-965F-7B7CA11DF7A6.jpeg

B48FDB17-BB9C-47F3-B4B0-2C44A98A3178.jpeg

I have installed this one too (thanks to Jpd) Was a nightmare to put on, 3 tubes messed up, finally with the help of these levers https://www.amazon.com/gp/product/B000R9GG1G/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 and this lube https://armor-dilloz.com/collections/tire-mounting-bead-lubricant , was easier.  I will test the tire later, and report

 

xFiDU0i.jpg

7u19xQU.jpg

Link to comment
Share on other sites

On 7/8/2021 at 2:22 PM, Mauricio said:

I have installed this one too (thanks to Jpd) Was a nightmare to put on, 3 tubes messed up, finally with the help of these levers https://www.amazon.com/gp/product/B000R9GG1G/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 and this lube https://armor-dilloz.com/collections/tire-mounting-bead-lubricant , was easier.  I will test the tire later, and report

 

xFiDU0i.jpg

7u19xQU.jpg

Initially I felt insecure, I felt that I had to force it to be able to make tight turns, I felt that it wanted to go too much to the side of the turn, I started with 30 PSi and I was lowering it (I weigh 85 kg).

I have lowered the PSi to 20, and I must say that it is something else, much better for tight turns, a little more nimble, not as good as the H666, but still much better for ride on obstacles, gaps, and climb small sidewalks.

  • Like 2
Link to comment
Share on other sites

  • 6 months later...
On 7/8/2021 at 9:22 PM, Mauricio said:

I have installed this one too (thanks to Jpd) Was a nightmare to put on, 3 tubes messed up, finally with the help of these levers https://www.amazon.com/gp/product/B000R9GG1G/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 and this lube https://armor-dilloz.com/collections/tire-mounting-bead-lubricant , was easier.  I will test the tire later, and report

 

xFiDU0i.jpg

7u19xQU.jpg

Thinking of getting this tire for my V12. If you could you measure the actual width of the tire, I would be very grateful =)

Link to comment
Share on other sites

 

On 1/31/2022 at 9:52 AM, Tune said:

Thinking of getting this tire for my V12. If you could you measure the actual width of the tire, I would be very grateful =)

Sorry I sold my 16x, months ago

Link to comment
Share on other sites

  • 10 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...