Daley1 Posted February 21, 2020 Share Posted February 21, 2020 i notice i lose about 20psi over a 2 to 3 weeks from the original Ks tube. This changes the whole way the wheel rides and handles.i know to put it on the air compressor to smarten it up. Did my first calibration after a firmware update and havent touched the calibration since ! Tyre pressure is just as important as calibration and probably needs more maintenance! Quote Link to comment Share on other sites More sharing options...
JT_(PL) Posted August 28, 2020 Share Posted August 28, 2020 It startes to happen on my Z10 after I reached 3000km that I often need to recalibrate. Sometimes even after each ride. This is frustrating. Do you think I should replace some parts? Quote Link to comment Share on other sites More sharing options...
Nuno Esteves Posted August 28, 2020 Share Posted August 28, 2020 I Have a KS16X with 2300Km. Just calibrate once, after upgrade to 1.07. Quote Link to comment Share on other sites More sharing options...
MikieSWE Posted August 29, 2020 Share Posted August 29, 2020 (edited) On 1/4/2020 at 2:18 PM, Skecys said: Hey guys; How often do you calibrate your EUC? I have an Inmotion V10 and recently upgraded to a KS16x. I rarely, if ever, had to calibrate the V10 after the initial time, I mainly did it now and then for peace of mind. The KS16x on the other hand seems to need a calibration every time I ride it, is this normal? The bluetooth patch seemed to have helped to an extend but I still find myself calibrating it alot. If I don't I get dips and tiltbacks on sharp turns (second batch 1.4board on 1.07 firmware). The behaviour returns after like a day sometimes less which is why I have to re-calibrate. I have no experience other then these two EUC's so hence I was wondering. I have a KS16X with 1.07 FW and 2nd batch MB(?). When I had the calibration issues I did that a LOT of times. Pedals dip on turn, and go up the other turn. This was a bit frustrating to get it ok. Then, one day I demo'ed how to calibrate, and alas! All problems gone. Never touched the calibration since. I never got a clue what difference I made. Maybe few crashes tumbled the electronics a bit? Be patient and try it out. Edited August 29, 2020 by MikieSWE spelling 1 Quote Link to comment Share on other sites More sharing options...
Skecys Posted August 29, 2020 Author Share Posted August 29, 2020 30 minutes ago, MikieSWE said: I have a KS16X with 1.07 FW and 2nd batch MB(?). When I had the calibration issues I did that a LOT of times. Pedals dip on turn, and go up the other turn. This was a bit frustrating to get it ok. Then, one day I demo'ed how to calibrate, and alas! All problems gone. Never touched the calibration since. I never got a clue what difference I made. Maybe few crashes tumbled the electronics a bit? Be patient and try it out. Mine had a defective motherboard. Had it replaced. Haven't had to calibrate it since . Quote Link to comment Share on other sites More sharing options...
Ben Kim Posted August 29, 2020 Share Posted August 29, 2020 calibrate once using a level, never touch it again afterward. Never noticed any changes. Quote Link to comment Share on other sites More sharing options...
( _ ) Alexey Posted August 29, 2020 Share Posted August 29, 2020 Inmotion V5, V8 and V10F - once. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.