Pagsy Posted November 8, 2016 Share Posted November 8, 2016 I have a v5F+ and a v8, on both of them the pedal on the right side got loose and it does remain folded anymore. has someone got this problem? How did you fix it? Link to comment Share on other sites More sharing options...
Dodgez Posted November 8, 2016 Share Posted November 8, 2016 I had the same problem with my V5D a while ago....it's easy to solve....just tighten the screw shown in the picture enclosed. Link to comment Share on other sites More sharing options...
nomad Posted November 8, 2016 Share Posted November 8, 2016 Did you crash a lot that could happen after a hard crash.. There's actually three bolts on the pedals you can tighten, it's well constructed. Don't overtighten one of them because it might be the wrong one, try all three and see which one went loose! Link to comment Share on other sites More sharing options...
houseofjob Posted November 9, 2016 Share Posted November 9, 2016 @Pagsy Both V8 & V5 use the same pedal grub screw sizes. The bottom grub screw, which puts tension on the pedal rod and, thus, adjusts the ease of the pedals unfolding can be tightened with a 5/32" Hex Key. (not sure of the exact Hex Key size for the 2 grub screws on each pedal side that contain the pedal rod, but it's a slightly bigger and common IKEA Hex Key size - probably 11/64" or 3/16"(?)). Link to comment Share on other sites More sharing options...
HEC Posted November 9, 2016 Share Posted November 9, 2016 I think it's actually using metric sizes rather than Imperial. Link to comment Share on other sites More sharing options...
Vik's Posted November 9, 2016 Share Posted November 9, 2016 Hmm... I was mistaken thinking Inmotion use magnets to hold them pedal folded... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.