Gimlet Posted July 18, 2016 Share Posted July 18, 2016 For those of you that have problems attaching the tyre pump to their valve these valve extensions seem cheap enough and there's a choice of angle available too. http://m.banggood.com/4590135-Degree-Angle-Brass-Air-Type-Valve-Extension-Adaptor-For-Motorcycle-Car-Scooter-p-979373.html?utm_design=28&utm_source=cheetahmail&utm_medium=mail_men190_all&utm_campaign=newsletter&utm_content=misue Link to comment Share on other sites More sharing options...
HEC Posted July 18, 2016 Share Posted July 18, 2016 Those will be IMO kinda hard to attach to most of EUCs. Those usually need stright extensions to be able to screw them in firmly ... Link to comment Share on other sites More sharing options...
Rehab1 Posted July 18, 2016 Share Posted July 18, 2016 I believe those type of valve extensions are designed to be permenant (i.e., not removed after initial installation). Link to comment Share on other sites More sharing options...
MaxLinux Posted July 19, 2016 Share Posted July 19, 2016 5 hours ago, HEC said: Those will be IMO kinda hard to attach to most of EUCs. Those usually need stright extensions to be able to screw them in firmly ... This is the kind I use: http://www.banggood.com/Electric-Unicycle-Air-Type-Valve-Extension-Adaptor-12_5cm-p-999165.html Link to comment Share on other sites More sharing options...
The Fat Unicyclist Posted July 19, 2016 Share Posted July 19, 2016 8 hours ago, HEC said: Those will be IMO kinda hard to attach to most of EUCs. Those usually need stright extensions to be able to screw them in firmly ... These bent ones have a "loose" cap so they can screw on with the bend... So they should work. Link to comment Share on other sites More sharing options...
Egbert Posted July 19, 2016 Share Posted July 19, 2016 I also use this 135 degree angle brass air type valve extension adaptor when filling air into my gw and it is much easier to do this as it was before, without that adaptor. Link to comment Share on other sites More sharing options...
HEC Posted July 19, 2016 Share Posted July 19, 2016 2 hours ago, The Fat Unicyclist said: These bent ones have a "loose" cap so they can screw on with the bend... So they should work. Not those linked from BG - they're in one piece sadly. And even if the bottom part "collar" would spin it would he hard to mount on the valve due to the limited space / access as the whole idea is to spin the extension from the top while attaching it. I have two "original" straight ones which came with my wheels looking similar to one that @MaxLinux linked. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.