EU_commuter Posted September 3, 2018 Share Posted September 3, 2018 I just finished a range test run with Gotway MSuper X 1600wh. The wheel was fully charged and ended with 6% after 98.65kms. I weigh 1350lbs, carrying a 10lb backpack. The 50% of the trip was on unpaved trail. It is almost a round trip. There was a breeze against my way most of the trip. The average running speed was about 25kph and I had a couple of rest stops. I have to say that the last several kms were not fun - I had to ride slowly and in three occlusions I pushed it up the hill for short distances. The wheel started to beep continuously when the battery level dropped below 10%. So for me the practical range is about 90km. Link to comment Share on other sites More sharing options...
RayRay Posted September 3, 2018 Share Posted September 3, 2018 30 minutes ago, EU_commuter said: I weigh 1350lbs Time to diet. Link to comment Share on other sites More sharing options...
RockyTop Posted September 3, 2018 Share Posted September 3, 2018 1 hour ago, EU_commuter said: I weigh 1350lbs, Wow!! best endorsement ever for the MSX . I HAVE to buy one now. Link to comment Share on other sites More sharing options...
stephen Posted September 3, 2018 Share Posted September 3, 2018 yeh that's about right i get about 50 miles I'm 210lbs with clothes on i usually ride for 40 miles and have about 27% left ... also what should my voltage read after a full charge ? it's never read 100% in wheel log app and never reaches 84v here a pic of what i usually get is other people's the same what voltage does yours read? Link to comment Share on other sites More sharing options...
EU_commuter Posted September 3, 2018 Author Share Posted September 3, 2018 37 minutes ago, stephen said: what should my voltage read after a full charge ? The Wheellog saves data in csv files. The minimal voltage reading is 53.6 and maximal (fully charged and at rest) is 66.32 for this trip. Link to comment Share on other sites More sharing options...
stephen Posted September 3, 2018 Share Posted September 3, 2018 Just now, EU_commuter said: The Wheellog saves data in csv files. The minimal voltage reading is 53.6 and maximal (fully charged) is 66.32 for this trip. i think you didn't understand my question ... when fully charged then go onto wheellog shouldn't it read 84v Link to comment Share on other sites More sharing options...
EU_commuter Posted September 4, 2018 Author Share Posted September 4, 2018 40 minutes ago, stephen said: i think you didn't understand my question ... when fully charged then go onto wheellog shouldn't it read 84v That is so strange. My reading is never 84V. The attached is now - being charged. Anybody knows why? Link to comment Share on other sites More sharing options...
EU_commuter Posted September 4, 2018 Author Share Posted September 4, 2018 Maybe my Wheellog version is too old? Link to comment Share on other sites More sharing options...
EU_commuter Posted September 4, 2018 Author Share Posted September 4, 2018 deleted old version of Wheellog and install it again. No change in voltage reading. Link to comment Share on other sites More sharing options...
stephen Posted September 4, 2018 Share Posted September 4, 2018 5 minutes ago, EU_commuter said: Maybe my Wheellog version is too old? it might be too old you can choose 84v or 100v or 67 this is my version Link to comment Share on other sites More sharing options...
stephen Posted September 4, 2018 Share Posted September 4, 2018 check all the settings it's in the somewhere Link to comment Share on other sites More sharing options...
EU_commuter Posted September 4, 2018 Author Share Posted September 4, 2018 6 minutes ago, stephen said: check all the settings it's in the somewhere ok. Thanks. Link to comment Share on other sites More sharing options...
stephen Posted September 4, 2018 Share Posted September 4, 2018 Just now, EU_commuter said: ok. Thanks. I've uploaded mine if you can't find it https://www.dropbox.com/s/wsphonw7ggr5ndb/WheelLog_22072018_2.0.13.zip?dl=0 Link to comment Share on other sites More sharing options...
EU_commuter Posted September 4, 2018 Author Share Posted September 4, 2018 38 minutes ago, stephen said: I've uploaded mine if you can't find it https://www.dropbox.com/s/wsphonw7ggr5ndb/WheelLog_22072018_2.0.13.zip?dl=0 Hi, Stephen, I downloaded your Wheellog apk. The voltage rating is the same 62.xxVolt! Did I get a 64V instead of 84V msx? But I can use the Ewheels' 84V fast charger to charge it!? Link to comment Share on other sites More sharing options...
EU_commuter Posted September 4, 2018 Author Share Posted September 4, 2018 forgot to check the battery setting. Sorry. Now, it's 78.8V! Many thanks, Stephen! Link to comment Share on other sites More sharing options...
stephen Posted September 4, 2018 Share Posted September 4, 2018 23 minutes ago, EU_commuter said: forgot to check the battery setting. Sorry. Now, it's 78.8V! Many thanks, Stephen! ???np Link to comment Share on other sites More sharing options...
Peter Q Posted September 5, 2018 Share Posted September 5, 2018 Can you tell me where is the battery setting? Is it inside the "Wheel Setting?" Thanks. Peter Link to comment Share on other sites More sharing options...
stephen Posted September 5, 2018 Share Posted September 5, 2018 9 minutes ago, Peter Q said: Can you tell me where is the battery setting? Is it inside the "Wheel Setting?" Thanks. Peter yeah it's in the battery setting ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.