KingJFA Posted September 7, 2018 Share Posted September 7, 2018 Was it supposed to come with an adapter? Does anyone here know where I could buy one? Link to comment Share on other sites More sharing options...
eekflyer Posted September 8, 2018 Share Posted September 8, 2018 I used a narrow air chuck and gently twisted the valve to fill. Gently. Link to comment Share on other sites More sharing options...
LanghamP Posted September 9, 2018 Share Posted September 9, 2018 Doesn't the V8 come with a door on the valve side in order to free access? The V5 has that. Link to comment Share on other sites More sharing options...
Jon Stern Posted September 9, 2018 Share Posted September 9, 2018 I did mine (just started riding it) this week and it wasn't particularly difficult. Open the little door below the pedal; rotate the wheel till you see the stem; remove the cover; pull out the end of the stem slightly (requires a little bit of force); and attach your pump. I managed it with my standard bicycle floor pump. Link to comment Share on other sites More sharing options...
Mono Posted September 9, 2018 Share Posted September 9, 2018 Link to comment Share on other sites More sharing options...
Gil Posted September 13, 2018 Share Posted September 13, 2018 Hi, You can buy this : https://www.aliexpress.com/item/140mm-Car-Auto-Truck-Brass-Wheel-Tire-Valve-Cap-Tyre-Stem-Extension-Extender-Tire-Inflation-Valve/32891050431.html I have been using one for years. Very convenient. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.