Jeffro441 Posted March 14, 2022 Share Posted March 14, 2022 Hello everyone I am brand new to EUC's and I am learning on my V11. I have an iPhone and the V11 seems to have no issues and is working well with the InMotion app. I wanted to use the DarknessBot app because it also works with my apple watch. My V11 will connect to the Darknessbot app, but the temperature is stuck at 174.2°F and never moves on the app (it also does the same if I change it to Celsius 79°C), also the battery percentage shows 0% when fully charged. Lastly I noticed when adjusting the ride mode from the default 100 fully soft to anything else it says the new setting was saved but whenever I go back to check the setting is back at 100 fully soft. I have made sure my V11 is up to date with the most current firmware, and I have tried uninstalling the Darknessbot app from my phone and reinstalling it multiple times with the same result. Lastly I did purchase the premium upgrade for DarknessBot app, don't know if that matters. Any help or advice would be greatly appreciated. Thanks, Jeff 1 Quote Link to comment Share on other sites More sharing options...
Chriull Posted March 15, 2022 Share Posted March 15, 2022 Welcome! 16 hours ago, Jeffro441 said: I have an iPhone and the V11 seems to have no issues and is working well with the InMotion app. I can't remember of such problems beeing reported here? But i have neither an iphone nor a V11... Maybe some other members have someore experience - maybe your iphone, ios and darknessbot version could help? 16 hours ago, Jeffro441 said: DarknessBot The developer @Ilya Shkolnik is from moscow and darknesbot could be one of his lower priorities by now.. Quote Link to comment Share on other sites More sharing options...
dignome Posted March 24, 2022 Share Posted March 24, 2022 At least for eucwatch I found that v11 firmware 1.4.0 had different protocol so that is probably breaking the app if you have that version of the wheel. 1 Quote Link to comment Share on other sites More sharing options...
Jeffro441 Posted April 19, 2022 Author Share Posted April 19, 2022 I am still not having any luck getting this issue resolved. Someone suggested unpairing (removing device) my V11 from the DarknessBot app and the trying to pair it again. I cannot figure out how to remove my device (V11) from the app. The app does not have a remove device option that I can find. Any help or advice would be greatly appreciated. Thanks. Jeff 1 Quote Link to comment Share on other sites More sharing options...
RockyTop Posted April 19, 2022 Share Posted April 19, 2022 @Ilya Shkolnik has not visited this forum in over a year. I think @Alla Shkolnik is our new DarknessBot person. Quote Link to comment Share on other sites More sharing options...
Jeffro441 Posted April 19, 2022 Author Share Posted April 19, 2022 Thank you for the info @RockyTop I hope @Alla Shkolniksee's this. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Alla Shkolnik Posted April 25, 2022 Popular Post Share Posted April 25, 2022 Ilya don’t have enough time to read forums, so I doing it sometimes. But he is still the one app developer 👨💻 We need to upgrade V11 supporting, thanks to Inmotion change their protocol. In one of the next versions we’ll fix it. 4 Quote Link to comment Share on other sites More sharing options...
Jeffro441 Posted April 25, 2022 Author Share Posted April 25, 2022 @Alla Shkolnikthanks so much for responding. I’ll be looking forward to the next update. Thanks again. Quote Link to comment Share on other sites More sharing options...
Alla Shkolnik Posted April 27, 2022 Share Posted April 27, 2022 We are very appreciative, if you guys can send us tech logs - in DarknessBot: Settings/About/Contact support - and wrote in topics “V11 problems”. and please, wrote what else problems have you met. We receive one message from V11 owner, but we need more info to compare. 1 Quote Link to comment Share on other sites More sharing options...
WILSONEUC Posted May 20, 2022 Share Posted May 20, 2022 v11 will not show battery percent in darknessbot that i know, i think there was a couple other things as well, but ill reply when I know more when i get out of work, Quote Link to comment Share on other sites More sharing options...
dwagelaar Posted May 26, 2022 Share Posted May 26, 2022 On 4/27/2022 at 8:31 AM, Alla Shkolnik said: We are very appreciative, if you guys can send us tech logs - in DarknessBot: Settings/About/Contact support - and wrote in topics “V11 problems”. and please, wrote what else problems have you met. We receive one message from V11 owner, but we need more info to compare. Done! Quote Link to comment Share on other sites More sharing options...
Alla Shkolnik Posted May 31, 2022 Share Posted May 31, 2022 Thank you, guys! I believe Ilya had fixed it, so it's will be in upcoming version 8.0, stay tuned please. Quote Link to comment Share on other sites More sharing options...
Alla Shkolnik Posted June 1, 2022 Share Posted June 1, 2022 You can also try our beta version. V11 fix should be already working in it. https://bit.ilya2606.ru/DBBeta Don't delete app, just install it over it to keep your data. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.