Popular Post Lukasz Posted November 19, 2020 Popular Post Posted November 19, 2020 (edited) I have pleasure to announce that Nylon fiber reinforced pedals with pegs and openers for S18 NyloNove are finally ready. ;-) Those pedals should be standard on S18 - especially for those who want to use it off-road! Pedals are around 100 grams lighter than original (364 grams each instead of 458 grams if counted with openers and axis) Angle is around 1° higher than standard - 79° instead of 80° Asymmetric shape, slightly wider on the front and thinner on the back. 19 pcs of stainless steel pegs with regulation 2-4 mm, stainless steel axis, stainless steel pedal axis screws, magnets are included on the pedals and for wheel installation (just insert) under gray foam on the front of the wheel. Finally we can get rid of the squeaky flat pedal springs! If somebody is interested please email me at a64(at)interia.pl View on the openers and leg savers - edges of the pedal mounts of S18 are very sharp - if not protected they will cut legs/trousers when you carry the wheel or surface when you lay the wheel down (like trunk carpet) Size comparison - pedals are slightly longer on the front for easier acceleration, asymmetric shape, slightly wider on the front and thinner on the back. 19 pcs of stainless steel pegs with regulation 2-4 mm, stainless steel axis, stainless steel pedal axis screws, magnets are included on the pedals and for installation (just insert) under gray foam on the front of the wheel. Finally we can get rid of the squeaky flat pedal springs. No more grip replacements, no more grip cleaning! Edited November 19, 2020 by Lukasz 6 Quote
redfoxdude Posted December 9, 2020 Posted December 9, 2020 Hi @Lukasz, I emailed a couple weeks ago. Still interested, though I imagine you are quite busy! Just wanted to make sure my email didn't get caught in your spam folder or something. My username at gmail. Regards! Quote
Lukasz Posted December 16, 2020 Author Posted December 16, 2020 On 12/9/2020 at 5:36 AM, redfoxdude said: Hi @Lukasz, I emailed a couple weeks ago. Still interested, though I imagine you are quite busy! Just wanted to make sure my email didn't get caught in your spam folder or something. My username at gmail. Regards! Hello @redfoxdude - please check Your gmail email, I have responded - sorry for being late but in fact I had been busy with many projects and over flooded with emails. Final version of S18 hollow nylon pedals with stainless steel pegs and magnets is ready! orders accepted at a64 (at) interia.pl Regards, Luk 2 Quote
RoadRunner Posted December 16, 2020 Posted December 16, 2020 @Lukaszhow about pedals for the 16X or 18XL? 😁 1 Quote
Lukasz Posted December 16, 2020 Author Posted December 16, 2020 5 hours ago, RoadRunner said: @Lukaszhow about pedals for the 16X or 18XL? 😁 Original peals in those models are quite ok so for now no nylon version existing. Quote
RoadRunner Posted January 3, 2021 Posted January 3, 2021 On 12/16/2020 at 6:26 PM, Lukasz said: Original peals in those models are quite ok so for now no nylon version existing. Quite ok is not enough for me. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.