Ninefingers Posted May 21, 2019 Share Posted May 21, 2019 My alarm goes off non stop. It's set to 35A and that should be around 2.7-3k Watts. Is this something to worry about or is it set wrong? Any uphill climp sets it off. Link to comment Share on other sites More sharing options...
stephen Posted May 21, 2019 Share Posted May 21, 2019 57 minutes ago, Ninefingers said: My alarm goes off non stop. It's set to 35A and that should be around 2.7-3k Watts. Is this something to worry about or is it set wrong? Any uphill climp sets it off. You need to set it to 90amps it will still set alarm off going up steep hills every now and then ,if alarm goes off continuous up steep hills that's when you should be careful ,set it to 90amps thats the safest number Link to comment Share on other sites More sharing options...
meepmeepmayer Posted May 21, 2019 Share Posted May 21, 2019 The reported current has only a vague connection to reality. Don't take any concrete number seriously (for doing math e.g.). Link to comment Share on other sites More sharing options...
Hansolo Posted May 22, 2019 Share Posted May 22, 2019 I confirm, my current alarm is setting to 80 A (I use MS3 and MSX) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.