EUCGUY Posted May 4, 2019 Share Posted May 4, 2019 I spent today 3D modeling mounts for this aliexpress trolleyhandle to be used on my Monster. Designed to be minimalistic and really sturdy! Because of the amount of stress these screws would experience from the weight of the wheel, i designed it so the brackets themself would support it and take care of the sideways loads, screws only handle pull forces. The mounts lock around at the rear and clamps a hold, trolley handle slides into it, clamps in place at the top and is secured at the bottom with a screw. When ordering this handle it comes with two brackets already, but they dont fit the wheel, remove the both, but reuse the screws for the bottom one. Tomorrow i will share photos or video on how sturdy this is. For the trolley handle : https://www.aliexpress.com/item/Women-handbags-Circle-shoulder-bags-vintage-purses-messenger-bags-Round-clock-bags-bolsa-clutch-feminina-bag/32470381929.html?spm=a2g0s.9042311.0.0.43be4c4dYhwly5 order now as theres lower price, the brackets i will start selling really soon and put up on my website. cheap, but strong. Link to comment Share on other sites More sharing options...
EUCGUY Posted May 4, 2019 Author Share Posted May 4, 2019 10 minutes ago, EUC GUY said: I spent today 3D modeling mounts for this aliexpress trolleyhandle to be used on my Monster. Designed to be minimalistic and really sturdy! Because of the amount of stress these screws would experience from the weight of the wheel, i designed it so the brackets themself would support it and take care of the sideways loads, screws only handle pull forces. The mounts lock around at the rear and clamps a hold, trolley handle slides into it, clamps in place at the top and is secured at the bottom with a screw. When ordering this handle it comes with two brackets already, but they dont fit the wheel, remove the both, but reuse the screws for the bottom one. Tomorrow i will share photos or video on how sturdy this is. For the trolley handle : https://www.aliexpress.com/item/Women-handbags-Circle-shoulder-bags-vintage-purses-messenger-bags-Round-clock-bags-bolsa-clutch-feminina-bag/32470381929.html?spm=a2g0s.9042311.0.0.43be4c4dYhwly5 order now as theres lower price, the brackets i will start selling really soon and put up on my website. cheap, but strong. Here's how it will be, these brackets are only printed a few layers in order to test them, final parts are done tomorrow. Link to comment Share on other sites More sharing options...
EUCGUY Posted May 6, 2019 Author Share Posted May 6, 2019 Link to comment Share on other sites More sharing options...
stephen Posted May 6, 2019 Share Posted May 6, 2019 Your wheels beautiful mat , are you sure them pads won't fit on a msx even if it over laps the cut out😃😊 Link to comment Share on other sites More sharing options...
EUCGUY Posted May 6, 2019 Author Share Posted May 6, 2019 4 minutes ago, stephen said: Your wheels beautiful mat , are you sure them pads won't fit on a msx even if it over laps the cut out😃😊 Pretty sure, lets see later sometime if i cant try and adapt it over Link to comment Share on other sites More sharing options...
h3X Posted May 20, 2019 Share Posted May 20, 2019 When you're already making a custom trolley handle, wouldn't it be better to make it centered (like on the kingsong)? What are the advantages of this style of handle in comparison? Link to comment Share on other sites More sharing options...
EUCGUY Posted May 20, 2019 Author Share Posted May 20, 2019 6 hours ago, h3X said: When you're already making a custom trolley handle, wouldn't it be better to make it centered (like on the kingsong)? What are the advantages of this style of handle in comparison? Perhaps, but personally i dont want one that goes over the handle or across the wheel. theres also no room to have it placed inside shell. as ive done it, its just like msuper, works fine for my use. no issues. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.