Popular Post Jason McNeil Posted July 19 Popular Post Share Posted July 19 A couple weeks back, LK released an update, v5.0.9, in an effort to address the pedal-tilt on jumps issue. Yesterday, a Customer reached out with a couple videoclips, compiled from Discord, from v5.0.9 Riders, where the Wheel could cut out, at low speed, when going over a bump, see videoclip below. https://youtu.be/yrb_nhD9FwI If you have installed this v5.0.9 update, please use LK App to update to the latest v5.0.11 release as soon as possible. Alternatively, if you had not updated the firmware recently, the firmware versions v5.0.8, & earlier are stable, there is no urgency to update. 2 8 Quote Link to comment Share on other sites More sharing options...
WheelGoodTime Posted July 19 Share Posted July 19 This update adds acceleration assist to the Lynx, just like in the Sherman L. What an awesome update! 2 Quote Link to comment Share on other sites More sharing options...
Seba Posted July 20 Share Posted July 20 For EUC World users: this firmware update is also available in EUC World. Quote Link to comment Share on other sites More sharing options...
Glizzy Posted July 20 Share Posted July 20 Having an issue with this update where my Lynx is stuck at the Upd 0 screen after fully loading the new update and restarting. The Leaperkim app shows restarting and it just hangs there for a long time before the wheel eventually just powers off on its own. When I power it back on manually it's still on the Upd 0 screen on the Lynx display. I can push the update again manually through the app and I see it load on the Lynx display, then goes to the No Conn screen, then back to Upd 0 and never goes further. Been through the process maybe 4 times so far. Wheel is connected to power and phone is within arm's reach of the wheel at all times. 1 Quote Link to comment Share on other sites More sharing options...
Skampster Posted July 20 Share Posted July 20 (edited) So I’m assuming that the Lynx now has the exact same feature set as the Sherman L in regards to how it responds to a hall sensor failure? Edited July 20 by Skampster Quote Link to comment Share on other sites More sharing options...
Glizzy Posted July 21 Share Posted July 21 8 hours ago, Glizzy said: Having an issue with this update where my Lynx is stuck at the Upd 0 screen after fully loading the new update and restarting. The Leaperkim app shows restarting and it just hangs there for a long time before the wheel eventually just powers off on its own. When I power it back on manually it's still on the Upd 0 screen on the Lynx display. I can push the update again manually through the app and I see it load on the Lynx display, then goes to the No Conn screen, then back to Upd 0 and never goes further. Been through the process maybe 4 times so far. Wheel is connected to power and phone is within arm's reach of the wheel at all times. Was able to complete the firmware update by pushing it from a different phone, as was suggested elsewhere. My phone (galaxy note 10+) is as up-to-date as possible including the LK app, so I'm not sure why it didn't cooperate here. Had to airplane mode my phone to get it to drop the connection to the Lynx so that the other phone could connect and push the update but no trouble at all from there and the update finished in seconds. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.