Nikola kickstand

[bracky72]

The built-in kickstand on the Nikola is not very good and I couldn't find one anywhere, so I whipped one up to be 3d printed.  It works really well so I thought I would share.

https://www.thingiverse.com/thing:5338550/files

[RockyTop]

Nice! Simple and to the point. Low profile  

[FlyingWigs]

Is it just an extension of the stock one to make it more stable? 

I had a mud guard stand, but it broke on the first curb I went off. 

[TantasStarke]

Just taped over the tiny lip the Nikola has on the back? Glad one has been made.

1 hour ago, FlyingWigs said:

Is it just an extension of the stock one to make it more stable? 

I had a mud guard stand, but it broke on the first curb I went off. 

I also used the mudguard one on Thingiverse, broke when I wheeled it out my front door lol. My door is like 1ft above the ground outside so when I rolled it out the mudguard clipped the raised doorway and it snapped the mudguard in half.

[bracky72]

Here is a better picture. It’s much stronger then the built in stand. 
 

 

[Funky]

I did something similar. I bought "Furniture Legs" and glued them to euc. Works great.

https://www.aliexpress.com/item/32980790365.html?spm=a2g0o.productlist.0.0.2aa6e477ljyYOt&algo_pvid=31eeb0e1-54bb-466c-8e67-83fa4d19dc34&algo_exp_id=31eeb0e1-54bb-466c-8e67-83fa4d19dc34-6&pdp_ext_f={"sku_id"%3A"12000022853016940"}&pdp_pi=-1%3B1.3%3B-1%3B-1%40salePrice%3BEUR%3Bsearch-mainSearch