EMA Posted March 7, 2021 Share Posted March 7, 2021 should be like this but wait for a double check becouse i'm not 100% sure [ writing by memory ] 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Xthrax Posted March 9, 2021 Author Popular Post Share Posted March 9, 2021 Last update. It finally works!. I was semi afraid the motor might be bad too. This image was sent from Gotway about how to wire the board. Hopefully this will help someone else one day. 7 1 Quote Link to comment Share on other sites More sharing options...
Scottie888 Posted March 13, 2021 Share Posted March 13, 2021 Dang I better save this pic in case I have to open up my MCM5v2 as I'm thinking of swap a knobby on it. Thanks @Xthrax Quote Link to comment Share on other sites More sharing options...
Camenbert Posted March 29, 2021 Share Posted March 29, 2021 Interesting indeed ! I also received the new Begode board in replacement of the Gotway one and by luck the length of the phase wire allows me to correctly plug them !! Is there any chance the BT speaker works on the 67V model too? I have the exact same connectors... Quote Link to comment Share on other sites More sharing options...
Xthrax Posted March 30, 2021 Author Share Posted March 30, 2021 16 hours ago, Camenbert said: Interesting indeed ! I also received the new Begode board in replacement of the Gotway one and by luck the length of the phase wire allows me to correctly plug them !! Is there any chance the BT speaker works on the 67V model too? I have the exact same connectors... The V1 version does not but the new board I got is for V2, so it has the connection but no speakers Quote Link to comment Share on other sites More sharing options...
Camenbert Posted March 30, 2021 Share Posted March 30, 2021 (edited) Exactly, I also have now, on the v2/Begode replacement board, this brown "bt speaker" connector despite being 67V and not 84V as specified on the board picture. But is it active ? I guess I will have to find out myself. It would be a pleasure if the plastic body shell does not give you the felling they will stand limited number of dismantling. Edited March 30, 2021 by Camenbert Quote Link to comment Share on other sites More sharing options...
Xthrax Posted March 30, 2021 Author Share Posted March 30, 2021 2 hours ago, Camenbert said: Exactly, I also have now, on the v2/Begode replacement board, this brown "bt speaker" connector despite being 67V and not 84V as specified on the board picture. But is it active ? I guess I will have to find out myself. It would be a pleasure if the plastic body shell does not give you the felling they will stand limited number of dismantling. No its not a feeling, the MCM5 is not made to be taken apart many times but I've had to do it many times due to Tire issues Quote Link to comment Share on other sites More sharing options...
peddiparth Posted August 21, 2021 Share Posted August 21, 2021 On 3/9/2021 at 9:50 AM, Xthrax said: Last update. It finally works!. I was semi afraid the motor might be bad too. This image was sent from Gotway about how to wire the board. Hopefully this will help someone else one day. This is of immense help to me. I forgot to take pictures while removing the silicone goop & plugs. Once my new MCM5 v2 motor arrives, I will be able to re-wire everything correctly based off of this diagram. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.