Stevie69 Posted September 28, 2016 Share Posted September 28, 2016 Hello..bought an electric unicycle..can't remember the type but it's the black and red one that's not to expensive..its been fine for a while but now when you switch it on the lights come on but there's no beep and the gryroscope doesn't work and the wheel doesn't spin..can't see any loose wires inside.any ideas?thanks.. Link to comment Share on other sites More sharing options...
HEC Posted September 28, 2016 Share Posted September 28, 2016 Maybe posting some pictures of the wheel and it's inners (controller board) would help to identify the make and model and provide some suggestions as how to proceed further. Link to comment Share on other sites More sharing options...
Chriull Posted September 28, 2016 Share Posted September 28, 2016 25 minutes ago, Stevie69 said: Hello..bought an electric unicycle..can't remember the type but it's the black and red one that's not to expensive..its been fine for a while but now when you switch it on the lights come on but there's no beep and the gryroscope doesn't work and the wheel doesn't spin..can't see any loose wires inside.any ideas?thanks.. Nothing worth reporting happend between the last successful ride and now? You have a multimeter and know how to safely do some measurements - then some data from the internals could maybe help to bring up some ideas... Mabye un- and replugging all connectors could help? (especially in case between then and now quite some time elapsed) I assume there is/was nothing smelling burnt and the motherboard looks fine (no burn marks, blown mosfets, etc...)? Is the wheel stuck or does it just not spin up by the motor? You followed the three thick wires from the motherboard to the motor? - sometimes their insulation abrades where the enter the hub/motor Link to comment Share on other sites More sharing options...
Stevie69 Posted September 28, 2016 Author Share Posted September 28, 2016 It's a vevor.no smoke or burning smell..it's my sons.crashed a couple of times but it's been fine for a month till now..I will check the 3 thick wires later..thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.