wheeler Posted July 19, 2016 Share Posted July 19, 2016 I just acquired a 1500 watt Solowheel Classic. I know there's a soft mode, and hard mode. But is there several hard modes? I was able to change modes somehow by lying it on the side then turning it on. And now when I turn it on, the indicator light flashes red momentarily, which I heard means hard mode. But I can set it so the duration of the red can be very quick (like a tenth of a second) to a more prolonged flash (1/2 a second). So it seems like there's different levels of hardness. Anybody know? And do you have instructions on switching modes? Link to comment Share on other sites More sharing options...
wheeler Posted July 19, 2016 Author Share Posted July 19, 2016 I found some instructions... https://www.youtube.com/watch?v=LV3_V_FFKKE Step 1: Lay the Solowheel on its side with the Power Button closest to the ground. Step 2: Power on the Solowheel. The LED will blink 3 times slowly, follwed by a nmbe of fast blinks. Step 3: Now stand the Solowheel upright, turn it off and then back on again. To switch modes, simply repeat the process. To indicate which mode you are in, after turning it on, if it's in hard mode, the LED will show green, red (1/2 a second), then back to green. Link to comment Share on other sites More sharing options...
HEC Posted July 19, 2016 Share Posted July 19, 2016 There are two modes AFAIK - never managed to get any other than those two. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.