Jump to content

how to keep the wheel MCM4


Recommended Posts

Hello, since I received my MCM4 has already dropped 3 times from the rest position against the wall. you do you use a stand to keep the wheel?

In a post ninebot, an owner of a 9b1 created a base with 3d printer, a design for MCM4 would be wonderful. Someone could create?

Link to comment
Share on other sites

http://www.banggood.com/Electric-Wheelbarrow-Brackets-Unicycle-Stands-Holders-Show-Shelves-p-954762.html

I'm fairly certain that this stand will work with the MCM4. It appears to be the same one as shown below:

Gotway-MCM4-130wh-260wh-340wh-520WH-680W

My MCM4 has yet to arrive, but with my MCM3, I found that leaning it against the wall to work okay. It would only fall over if I leaned it against something carelessly or if I happened to knock it over.

Link to comment
Share on other sites

1 hour ago, WakefulTraveller said:

I'm fairly certain that this stand will work with the MCM4. It appears to be the same one as shown below:

I have 3 of these stands. They are too narrow for my MCM4-HS to fit in.

Link to comment
Share on other sites

15 hours ago, obus said:

you do you use a stand to keep the wheel?

Mine stands like this. It's fairly stable. The disadvantage is that it also leans on the plastic (mine's plastidipped, otherwise it'd scratch). I'm thinking of 3d printing little "feet" to attach to the bottom of the trolley handle to make it stand better.

IMG_3073.JPG

Link to comment
Share on other sites

26 minutes ago, obus said:

That was hard to look at on the mobile site. Fixed: http://www.aliexpress.com/item/Universal-Folding-A-Frame-Guitar-Stand-For-Acoustic-Guitar-Electric-Guitar-Bass-Free-Shipping-Wholesales/1751556607.html

Anyways, it looks like the one in the picture above, so it should work.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...