null Posted June 20, 2021 Share Posted June 20, 2021 (edited) Can you monitor charge / connect to a Gotway controller board without powering on the motor? My dads Monster v3 doesn't seem accessible while charging except when fully powered on (flying off the stand). Edited June 20, 2021 by null Quote Link to comment Share on other sites More sharing options...
Denny Paul Posted June 20, 2021 Share Posted June 20, 2021 Nope. You must have the wheel on to see it’s charge. If you don’t use a stand and have the wheel on its back or side, the tire won’t spin up when you turn it on. I think it’ll eventually auto shut off after 15 mins or so idling like this. or you can buy a fast charger with a built in voltage meter. This will let you see the charge with the wheel off 2 Quote Link to comment Share on other sites More sharing options...
null Posted June 20, 2021 Author Share Posted June 20, 2021 Thanks @Denny Paul , good to know. Laying on the side is probably a good solution, or I’ll try the timeout. I do have a charger with display, but I’d like to have more fine grained info as well as the graph from the log. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.