Radiobayer Posted July 20, 2016 Share Posted July 20, 2016 Hi, My Airwheel x3 stopped working so I open it up, and noticed the motor cable had come loose from the socket. The problem is that the colors on the cables that come from the motherboard doesn't match up with the hale cabel colors. Can someone give me a hint whats the right color combination? Link to comment Share on other sites More sharing options...
Chriull Posted July 20, 2016 Share Posted July 20, 2016 It's just white and yellow that don't 100% match - if noone with an airwheel can give you a definite answer that would be my way to go. just out of curiosity - how could the hall sensor cables go off? edit: just as a hint, in case airwheel somehow respects "normal" color coding. Then red should be supply voltage, black ground leaving yellow blue and brown for the signals of the three hall sensors. As you have black and red for supply on both sides and brown and blue too for the signal white and yellow should be an almost perfect match. But again as said, thats only true if airwheel did normal "professional" color coding. I personally would not give it a second thought and match white and yellow, but this could also be the end of your EUC, if you have bad luck.... Link to comment Share on other sites More sharing options...
Radiobayer Posted July 20, 2016 Author Share Posted July 20, 2016 More like the connectors shoes loosned from the connector, going to replace the connector, but need to find out which is which first Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.