LightWave Posted April 27, 2022 Share Posted April 27, 2022 Â Quote Link to comment Share on other sites More sharing options...
OldFartRides Posted April 27, 2022 Share Posted April 27, 2022 (edited) So….this is the same wheel you’ve been working on, right ? I re-read the other thread. That pedal hanger is supposed to be fixed to the axle, right ? So it got loose and was  scraping the motor housing ? That was the noise you heard recently ? Surely that wasn’t just a press fit…or was it ? I’m not familiar with that wheel. But good on ya for keeping at it. is there a set screw in the side of that pedal hanger ? Edited April 27, 2022 by OldFartRides Adding question Quote Link to comment Share on other sites More sharing options...
LightWave Posted April 27, 2022 Author Share Posted April 27, 2022 32 minutes ago, OldFartRides said: That pedal hanger is supposed to be fixed to the axle, right ? I'm not sure tbh that's why I posted before I reassemble the wheel and hurt myself lol Quote Link to comment Share on other sites More sharing options...
OldFartRides Posted April 27, 2022 Share Posted April 27, 2022 (edited) Yes, the stator, the axle and the pedal hangers are all solidly connected. The housing/ rim/ wheel turn. what about the other pedal hanger ? Still fixed to the axle ? Notice any difference between the two ? Have you watched assembly/ disassembly vids ? Your answer may be there. Edited April 27, 2022 by OldFartRides Quote Link to comment Share on other sites More sharing options...
alcatraz Posted April 27, 2022 Share Posted April 27, 2022 What wheel is that? Quote Link to comment Share on other sites More sharing options...
LightWave Posted April 27, 2022 Author Share Posted April 27, 2022 4 hours ago, OldFartRides said: Have you watched assembly/ disassembly vids ? Your answer may be there. Yeah all the videos I could find, they seem to skip that step but I think I may have thought of a solution and I will try it tomorrow 1 hour ago, alcatraz said: What wheel is that? v10 Quote Link to comment Share on other sites More sharing options...
alcatraz Posted April 27, 2022 Share Posted April 27, 2022 I'm not familiar with the arm clamp mechanism on the V10. There has to be one as it's very important that the axle and arm are securely mounted together. Maybe you're missing something. I've seen some clamps use wedges, some use a non circular axle, or a combination of both. 1 Quote Link to comment Share on other sites More sharing options...
alcatraz Posted April 27, 2022 Share Posted April 27, 2022 I think there's a clamp mechanism on the side there. See the hole in the cavity... Â Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.