Cebulafpv

don't know yet, from calculations with current motor and gearing it should achieve only 130-140lbs but also keep in mind it's 24 inch outer diameter tire, with final gearing it should do simillar to ex30, if this project will prove to be reliable i will invest moretime, money and effort in it to finish whole euc and put much stronger motor which should do around 330lbs. That's on paper, we'll see. What do you mean grip height? axle height?

I just did the levers for testing my prototype chain drive wheel. It's just testing platform, so it looks like crap but dont worry it's not how it will look (;

i had vesc before but it burned and I did't want to burn another one so I installed ex30 controller which just works

if you have 30v master batteries then you need to use 30v chargeboard and it should be fine. however I don't know if signal wire is somehow different in 30v chargeboard and batteries but i hardly think so

around 44kg, it's regular ex30 board so yes, you can update

@Cerbera I'm making few more advanced projects (not only euc) and those things aren't cheap ( ͡° ͜ʖ ͡°)

hello I’m selling my euc project. Here are some specs: c40 motor with much thicker cables than stock, 2400wh samsung 50s copper custom welded battery, ex30 motherboard, wheel is made mostly of cnc machined aluminum and carbon fiber, battery boxes are glass fiber. It has super smooth, 125mm suspension travel system which uses hard anodized linear rails and bearings with seals as sliders. Wheel is almost new, has few kilometers on it (mileage will grow over time) I will send 3d models of parts to the next owner so there will be no problem with spare parts if needed. Asking for 3400$ plus shipping. More pictures here: https://drive.google.com/drive/folders/16EdZoJ1pXjPtJKmOBm7BcVXIl5KDDwUr?usp=share_link

don't know if I should trust colors on display wire

yeah, i figured out buttons pins but how do i should know where power and signal pin is?

Hi, I want to use ex30 motherboard and display in my euc project but my controller has 6pin connector for display and display is newer batch i believe and it doesn't have have connector, it's got pins like extreme screen. it's not a problem for me but i need to know with pin goes to which cable.

I have sherman S for sale. Torque pads, fast 15A regulated charger, custom cnc made shock holder with teflon inserts, grizzla seat included. Bearings were changed recently for SKF and oil in shock was replaced with rockshox. It has around 3000km on the clock. price 3000EUR + shipping Im located in Poland

Hi, my sherman s just died. I went to store for 3 minutes and left my wheel outside. It was turned off and was standing on kickstand. When I came back i tried to turn it on but nothing happened. I disassembled it and only i can see are 2 blue diodes, one is flashing and one is constantly on. Wheel wont charge also. I tried disconnecting batteries and discharging capacitors but nothing happens. Any ideas? Could it be dead dcdc module? https://drive.google.com/file/d/1K5RzzhhVu1IDFp_WaupanPxrci_RtxNI/view?usp=drivesdk

Bump Master 2200€ nikola 1300€

Edit, nikola 1400€, master 2400€

Hello, I'm selling my 2 wheels: 1. Begode master 2400wh. Mileage 300km. Almost like new. It has modded powerpads, jumppads, transparent light cover. No crashes. It comes with rockshox pump, spare powerpads, spare 2 battery boxes. Price 2600 € + shipping 2. Begode nikola plus 1845wh. (18650 sanyo ga version, I haven't heard any fires of this version so it should be safe) Mileage above 4k km. No crashes, comes with nylonove kinetic powerpads. Has really tiny dent on rim, doesn't affext ride. Price 1500€ + shipping Im located in Poland Photos: https://drive.google.com/drive/folders/1QuNj_gDWQYg0_BESOUiNGLH4uOkP4rzn