DeathSuitcase Posted May 25, 2023 Share Posted May 25, 2023 (edited) My Kingsong 16xs died and I had to replace the motherboard (this required taking the entire wheel apart) and reconnecting every wire and panel afterwards. The wheel is pretty new (only 5 months with 600km) I suspect I may have miss installed a part or perhaps connected the wrong wire. As a note the problem didn't exist before I replaced the motherboard. Included is a video of the issue. Can anyone help me diagnose what I did wrong? VID20230525150031.mp4 Edited May 25, 2023 by DeathSuitcase Quote Link to comment Share on other sites More sharing options...
alcatraz Posted May 25, 2023 Share Posted May 25, 2023 This happens on all wheels where the control board isn't solidly fixed to the motor axle. Usually the bolts at the board, or the bolts holding the shell onto the pedal hangers. 1 Quote Link to comment Share on other sites More sharing options...
alcatraz Posted May 25, 2023 Share Posted May 25, 2023 There's a gyro on the board that's super sensitive to inclination. The board mustn't flop around even by a couple millimeters or this happens. The board thinks you're braking/accelerating when infact you aren't. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.