Badkad Posted April 25, 2022 Share Posted April 25, 2022 So, I have a blown EXN board, but the dc-dc board looks fine. I have the possibility to buy a new RS HS board for cheap. Is it possible to flash EXN firmware onto the RS board, remove and replace the RS DC board with the EXN's and have it work? Or could I just put the RS board in there without flashing and figure out my own solution for the lights? 1 Quote Link to comment Share on other sites More sharing options...
Lars Heeneman Posted May 2, 2022 Share Posted May 2, 2022 Hi @Badkad unfortunately Begode will not share the firmware to flash it in to another board. only the newer black controllers can update firmware but still not flash it from EX-N to RS. however you should be able to put an RS board in your EX-N and use it normally. but it could burn some components as the specs are not excactly the same so i would just buy a new EX-N board. Quote Link to comment Share on other sites More sharing options...
Popular Post Freestyler Posted May 2, 2022 Popular Post Share Posted May 2, 2022 I helped a guy flash his RS HS -> RS HT few days ago. (he replaced his motor as well of course). RS board has slightly smaller capacitors compared to ex.n, but shouldn't be a problem. Pm me if you want it done. 2 2 Quote Link to comment Share on other sites More sharing options...
therobokat Posted August 4, 2022 Share Posted August 4, 2022 Sorry to dig up an old post, but I'm attempting to upgrade my battery on my rs from 1800wh to 2700wh, I would also like to increase the top speed if possible. I've heard that the motor is exactly the same, and from inspection alone, they seem to be the same board but with different wire gauges on the power connector, and the heatsink. @Freestyler I want to flash the EXN firmware on the RS as well, couldn't dm yet since I just joined. 2 Quote Link to comment Share on other sites More sharing options...
Blackchaos1991 Posted October 22, 2023 Share Posted October 22, 2023 On 5/3/2022 at 6:53 AM, Freestyler said: I helped a guy flash his RS HS -> RS HT few days ago. (he replaced his motor as well of course). RS board has slightly smaller capacitors compared to ex.n, but shouldn't be a problem. Pm me if you want it done. Can you pm for me? Quote Link to comment Share on other sites More sharing options...
Robse Posted October 22, 2023 Share Posted October 22, 2023 2 hours ago, trannhattien2019 said: Can you pm for me? @Freestyler haven't been online here since February 17th, so you probably won't get an answer right away. I think I read that something bad happened to him, but I can no longer find the place where it was written. Hoping for the best for him. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.