db77 Posted February 20, 2022 Share Posted February 20, 2022 Hello, I have disassembled my MSX 84 V and I don't know how connect leds... For the left part, I wonder if the sheet of "orange-black-red" wires that comes out of the LED strip is connected : 1 - to the wires that go up to the other side, 2 - to the wires that go towards the left front panel. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
EMA Posted February 20, 2022 Share Posted February 20, 2022 led strips are connected in series starting from the back light, connect them, if something is not right just swap the order Quote Link to comment Share on other sites More sharing options...
db77 Posted February 20, 2022 Author Share Posted February 20, 2022 Thank you but I just want to know where to connect the orange red black cable of the left rear panel, because there are two cables. Is it to the front left or to the other rear through the handle. Quote Link to comment Share on other sites More sharing options...
db77 Posted February 21, 2022 Author Share Posted February 21, 2022 Hello, Before : After I reversed on the left side : Any idea ? Quote Link to comment Share on other sites More sharing options...
EMA Posted February 21, 2022 Share Posted February 21, 2022 (edited) i don't have the right order but it's not a big deal start with one string at time you'll find it easy, first the back one, than front Edited February 21, 2022 by EMA Quote Link to comment Share on other sites More sharing options...
db77 Posted February 21, 2022 Author Share Posted February 21, 2022 Ok I try this afternoon (I'm in France) 1 Quote Link to comment Share on other sites More sharing options...
db77 Posted February 21, 2022 Author Share Posted February 21, 2022 I reversed on the left and result was better. Then I also reversed on the right side. Rear seems OK, unless it's powered by the wires from the front… to be seen in use, because the second layer is used during braking to signal behind. At the front, it illuminates the tire. I don't know where this can come from... Finally I pushed the headband fully into place and it's much better. I will leave it like that. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.