Raptor Posted November 24, 2021 Share Posted November 24, 2021 (edited) Self-crafted suspension saddle Begode MSP / RS Maybe someone wants to do the same then I'll describe it here a bit through google translation : On top of the MSP seat, I made a plastic plate from the kitchen cutting board (glued with double-sided tape) and plastic window wedges with double-sided tape on it (to achieve the right tilt). Through it all, there is an 8mm bolt under the orig saddle (I dug a 1mm steel sheet into the orig saddle and rolled a recess in it for the bolt head). I used a bicycle saddle with two parallel bars at the bottom. Thus, with this bolt, I tightened these rails, by means of a nut, with the above-mentioned construction. In fact, I fixed these rails to the so-called window wedges, also with car glass glue (since the glass glue is not very even, he didn't want to come into the picture 🙂). https://photos.app.goo.gl/Av5sUi4Gn27mZ3xw5 Edited November 24, 2021 by Raptor 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.