Jump to content

Drifting steering, what thing do I need to replace?


Recommended Posts

So, my MiniPro has a slight problem, it's fully ridable, but one problem is bugging me. There's some play in the steering stick and if you push it over to the right it stays there and kinda slow turns. Push it left and it sits in place like it should. Get on it and it's mostly fine although may drift if you go straight and dont touch steering stick at all. 

 

So what thing should I replace? 

Link to comment
Share on other sites

i believe that one (or both) of hex bolts that holds the steering stick base get loose (located in the red thing on the mini's body that you plug your steering stick to) I found that sometimes you need to tighten them. Bolts are located under red rubber plug, you should put it out first

But try not to over-tight it: i broke one of the bolts one day in to two pieces (Hulk – stroong!!)))

 

IMG_0476.JPG

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...