Jump to content
Noam Elad

ks16s stop working

Recommended Posts

after the ride i had, the wheels suddenly stop working, when i turn it on it just beeping , any ideas of how to fix it?

Share this post


Link to post
Share on other sites
21 minutes ago, Noam Elad said:

after the ride i had, the wheels suddenly stop working, when i turn it on it just beeping , any ideas of how to fix it?

If it's still within warranty, best would be to contact the seller.

For any tips on how to fix it some description of what happened would be helpfull - the more details, the higher the chance someone could maybe help.

Share this post


Link to post
Share on other sites
6 minutes ago, Chriull said:

If it's still within warranty, best would be to contact the seller.

For any tips on how to fix it some description of what happened would be helpfull - the more details, the higher the chance someone could maybe help.

i cant upload video to here

Share this post


Link to post
Share on other sites
40 minutes ago, Noam Elad said:

after the ride i had, the wheels suddenly stop working, when i turn it on it just beeping , any ideas of how to fix it?

beeping with some 4 red Led's blinking? That means some kind of motor defect/hall sensors...warranty!

Share this post


Link to post
Share on other sites
3 minutes ago, KingSong69 said:

beeping with some 4 red Led's blinking? That means some kind of motor defect/hall sensors...warranty!

the leds dont work. if i press the button i can turn on and off the front and back leds. it just beeps and does nothing

Share this post


Link to post
Share on other sites
Just now, Noam Elad said:

the leds dont work. if i press the button i can turn on and off the front and back leds. it just beeps and does nothing

Your last ride everything was ok? or something happend?

Perhaps it is just the fuse on the motherboard....where did you buy it? Contact the seller!

Share this post


Link to post
Share on other sites
6 minutes ago, KingSong69 said:

Your last ride everything was ok? or something happend?

Perhaps it is just the fuse on the motherboard....where did you buy it? Contact the seller!

everything was fine. 
my seller is cheking the cause of the problem,i just wanted to know if someone had this kind of failure

Share this post


Link to post
Share on other sites
28 minutes ago, Noam Elad said:

i cant upload video to here

Yes - here is only limited space. You'd have to upload it to youtube or something similar and then you can paste the link here.

 

Share this post


Link to post
Share on other sites

I have to corect myself:

If front and back lights are working...but nothing else, it can not be the fuse.

Perhaps a connection good loose...or something bad happend-burned, so that the motor is not working anymore.

When i understand correct: you finish your last ride like normal...power it off, and when the next time power it on, it does not work?

Share this post


Link to post
Share on other sites
6 minutes ago, Chriull said:

Yes - here is only limited space. You'd have to upload it to youtube or something similar and then you can paste the link here.

 

kk

5 minutes ago, KingSong69 said:

I have to corect myself:

If front and back lights are working...but nothing else, it can not be the fuse.

Perhaps a connection good loose...or something bad happend-burned, so that the motor is not working anymore.

When i understand correct: you finish your last ride like normal...power it off, and when the next time power it on, it does not work?

yap
i opened it up and everything looks normal.
it know the voltage and the current of the batteries.
when i open the app i dont see the serial number of the device

Share this post


Link to post
Share on other sites
6 minutes ago, Noam Elad said:

kk

yap
i opened it up and everything looks normal.
it know the voltage and the current of the batteries.
when i open the app i dont see the serial number of the device

Have you checked both Fuse on the board? And all connections? Especially all connections going to the motor?

Share this post


Link to post
Share on other sites
40 minutes ago, Chriull said:

If it's still within warranty, best would be to contact the seller.

For any tips on how to fix it some description of what happened would be helpfull - the more details, the higher the chance someone could maybe help.

 

7 minutes ago, KingSong69 said:

I have to corect myself:

If front and back lights are working...but nothing else, it can not be the fuse.

Perhaps a connection good loose...or something bad happend-burned, so that the motor is not working anymore.

When i understand correct: you finish your last ride like normal...power it off, and when the next time power it on, it does not work?

 

3 minutes ago, Noam Elad said:

kk

yap
i opened it up and everything looks normal.
it know the voltage and the current of the batteries.
when i open the app i dont see the serial number of the device

As it seems fuse is ok, ?batteries are ok?, mosfet are not burnt, ?connections and wiring are ok?, motor is not "stuck"

... so my best guess would be to replace the motherboard...

... hard to say anything else ...

 

12 minutes ago, Noam Elad said:

everything was fine. 
my seller is cheking the cause of the problem,i just wanted to know if someone had this kind of failure

Support by the seller should be your best option - change of the motherboard and hope that fixes your cause!

 

Share this post


Link to post
Share on other sites
1 minute ago, Chriull said:

 

 

As it seems fuse is ok, ?batteries are ok?, mosfet are not burnt, ?connections and wiring are ok?, motor is not "stuck"

... so my best guess would be to replace the motherboard...

... hard to say anything else ...

 

Support by the seller should be your best option - change of the motherboard and hope that fixes your cause!

 

I am pretty sure this beeping all 5 seconds has a special meaning.....i just dont know which :-)

Share this post


Link to post
Share on other sites
14 minutes ago, KingSong69 said:

Have you checked both Fuse on the board? And all connections? Especially all connections going to the motor?

everything looks fine

WhatsApp Image 2017-08-19 at 13.53.10 (1).jpeg

WhatsApp Image 2017-08-19 at 13.53.10.jpeg

Share this post


Link to post
Share on other sites
6 minutes ago, Chriull said:

Support by the seller should be your best option - change of the motherboard and hope that fixes your cause!

Can perhaps be also a defect BMS...

The "S" series are a bit different to the older KS...

Example: While charging you are not able to turn on the wheelmotor, you are just getting lights and bluetoothconnections to the app. Instead of 4 cable(2 charge, 2 power) and daisy chaining, now the packs are all directly connected to the board with 3 main wires....the charge port goes to the board, not to the packs.  Also there is one thin cable which connect the 2 batterie packs(balancing/BMS communication i guess).

As the S series have 2 fuses on board, this can mean, each fuse has a different task (can be...not sure about that)

 

so yes, probably its the mainboard, but with this new wiring, there are also little chances on BMS being the culprit

Share this post


Link to post
Share on other sites
5 minutes ago, Noam Elad said:

everything looks fine

WhatsApp Image 2017-08-19 at 13.53.10 (1).jpeg

WhatsApp Image 2017-08-19 at 13.53.10.jpeg

check the 2 green 30 amp fuses! they are ok?

Share this post


Link to post
Share on other sites
5 minutes ago, KingSong69 said:

Can perhaps be also a defect BMS...

The "S" series are a bit different to the older KS...

Example: While charging you are not able to turn on the wheelmotor, you are just getting lights and bluetoothconnections to the app. Instead of 4 cable(2 charge, 2 power) and daisy chaining, now the packs are all directly connected to the board with 3 main wires....the charge port goes to the board, not to the packs.  Also there is one thin cable which connect the 2 batterie packs(balancing/BMS communication i guess).

As the S series have 2 fuses on board, this can mean, each fuse has a different task (can be...not sure about that)

 

so yes, probably its the mainboard, but with this new wiring, there are also little chances on BMS being the culprit

everything works and looks like you describe.
this problem can happen from overheating?

3 minutes ago, KingSong69 said:

check the 2 green 30 amp fuses! they are ok?

my tools are not here so i need to wait for them.

Share this post


Link to post
Share on other sites
1 minute ago, Noam Elad said:

everything works and looks like you describe.
this problem can happen from overheating?

my tools are not here so i need to wait for them.

you can check the fuses by looking at them! the wire inside must be ok...you can see that through the fuse...

 

Overheating? no, dont think so...parts of your board are working...(front lights) parts not(app connection, motor)....so perhaps some chip on the board defect, or one fuse defect...or whatever

Share this post


Link to post
Share on other sites
5 minutes ago, KingSong69 said:

you can check the fuses by looking at them! the wire inside must be ok...you can see that through the fuse...

 

Overheating? no, dont think so...parts of your board are working...(front lights) parts not(app connection, motor)....so perhaps some chip on the board defect, or one fuse defect...or whatever

the fuses are fine.
i can connect to the app but i dont see the serial number.

Share this post


Link to post
Share on other sites
Just now, Noam Elad said:

the fuses are fine.
i can connect to the app but i dont see the serial number.

you can connect to the wheel?? So it says connected? but do not see the serial number?? 

Can you try to update? 

 

very crazy...do you have android or iphone?

Share this post


Link to post
Share on other sites
3 minutes ago, KingSong69 said:

you can connect to the wheel?? So it says connected? but do not see the serial number?? 

Can you try to update? 

 

very crazy...do you have android or iphone?

android.
it says that it connected, i will show you a picture 

Share this post


Link to post
Share on other sites
1 minute ago, Noam Elad said:

android.
it says that it connected, i will show you a picture 

software Update possible?

Share this post


Link to post
Share on other sites

Go to the right in the app...

There is an option "firmware upgrading"....look if that is possible....

Also there is an option "basic information" ...what is printed there?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...