Ilya Shkolnik Posted January 22, 2020 Author Share Posted January 22, 2020 DarknessBot 5.6 already in the App Store! - KingSong/Gotway: Added calibration - Added Video Recorder settings and Vufine Wearable Display support (Thanks to Isaiah Coberly) - KingSong: Added 18LH support - Gotway: Added Beep tile - KingSong/Gotway: Changed battery level calculation - KingSong: Changed firmware version format - Gotway: Fixed changing max speed - Gotway: Fixed connection to new batch - KingSong: Fixed reading serial number Quote Link to comment Share on other sites More sharing options...
Greg Goodwin Posted January 23, 2020 Share Posted January 23, 2020 On 2/25/2017 at 2:51 PM, Ilya Shkolnik said: Hello readers and riders! I apologize for my English, if it has any errors. First of all, let me introduce myself: My name is Ilya, I'm the iOS Developer since 2009. Also I have Ninebot One E since April 2015. Then I decided to combine these skills into my new app - DarknessBot. The application is available only for iOS 9.0 and higher. Ninebot haven't presented any official APIs yet, so I cooperated with the GyroMetrics developer - Paco Gorina (special thanks for helping with Ninebot BLE protocol) The application from the active EUC owners! It supports the following models: ► Ninebot One (C, C+, E, E+, P) ► Inmotion (V3, V3C, V3S, V3Pro, V5, V5+, V5F, V8, R1, R1N, R1S, R1S, R1T, R1AP, R1CF, R1EX, R2, R2N, R2S, R2EX, L6) ► Gotway (MCM2, MCM4, ACM, MSuper V1/V2/V3, Monster) ► KingSong (14, 16, 18) Features: ◉ Modify tiled interface that you can customize ◉ Displaying all available metrics through Bluetooth LE: ► Current speed ► Maximum speed ► Total mileage ► Remaining mileage (depending of rider's weight, the battery charging cycles, and weather conditions) ► Total runtime ► Battery level ► Temperature of the controller (not for all models) ► Power ► Voltage ► Longitudinal and transverse tilt (not for all models) ◉ Logging and displaying graphs of metrics (up to a month) ◉ Record video from a camera with a sensor display ◉ Changing the riding mode (not for all models) ◉ Changing maximum speed (experimental) ◉ Changing the maximum speed on limited mode (experimental) ◉ Changing lock mode (not for all models) ◉ Changing limited speed mode (not for all models) ◉ Compass and weather forecast ◉ Apple Watch support ◉ HealthKit Integration What next: ◉ One more thing Beta test 1.2 ◉ Support Ninebot One A1/S2 Application for free, but it has a few paid functions. So I provide 40 promocodes for this forum. Promocodes Download from Appstore Hey!! I am looking to create same type of app for renting out for dcscooter.com and really just want Bluetooth lock functionality. Can we talk? Thanks so much! Quote Link to comment Share on other sites More sharing options...
Aleksander Prugar Posted January 23, 2020 Share Posted January 23, 2020 Hello Alla! Here is Aleksander from Warsaw. I just got a new Xiaomi 365 pro. Just after I downloaded Your app to the my Iphone 6 Plus, however app does not work. Please check screens below. I tried to restart phone, reinstall app. No positive result. No map, failed to load data, no trips yet, offline mode. Thanks! 1 Quote Link to comment Share on other sites More sharing options...
Alla Shkolnik Posted January 23, 2020 Share Posted January 23, 2020 1 hour ago, Aleksander Prugar said: Hello Alla! Here is Aleksander from Warsaw. I just got a new Xiaomi 365 pro. Just after I downloaded Your app to the my Iphone 6 Plus, however app does not work. Please check screens below. I tried to restart phone, reinstall app. No positive result. No map, failed to load data, no trips yet, offline mode. Thanks! Hello! I think you can’t attach screenshots until you haven’t some messages or reputation points, see it in forum rules, please... While you have a new m365 pro, I suppose you have newest BLE version and firmware. Cause strong data encryption we can’t support it 😔. We support m365 (pro) with - BLE version 0091 and prior - firmware 1.6.1 and prior. Check please what is your versions. (I think you can find this data in official app.) But if you can connecting to app, but see empty tiles with spinners on dashboard - 99% you have newest BLE or FW. Quote Link to comment Share on other sites More sharing options...
Aleksander Prugar Posted January 23, 2020 Share Posted January 23, 2020 Please check below, Maybe such links will works. https://ibb.co/J278Q17https://ibb.co/RHR4xB1https://ibb.co/2jv3t38https://ibb.co/cFpKRr8https://ibb.co/7JqPDFb Quote Link to comment Share on other sites More sharing options...
Aleksander Prugar Posted January 23, 2020 Share Posted January 23, 2020 Yes! My links works! Cool. I do not have graphs (I bought this). In fact this app shows nothing and I paid 6$ for extra modes. How to check this BLE? It does not sounds familiar to me. Much thanks! Quote Link to comment Share on other sites More sharing options...
Ilya Shkolnik Posted January 23, 2020 Author Share Posted January 23, 2020 (edited) 4 hours ago, Aleksander Prugar said: Please check below, Maybe such links will works. https://ibb.co/J278Q17https://ibb.co/RHR4xB1https://ibb.co/2jv3t38https://ibb.co/cFpKRr8https://ibb.co/7JqPDFb DarknessBot supports M365 only with BLE version 0.9.1 or prior. In higher version BLE is encrypted and no one has decrypted it until now. About screens Map and Profile: Firstly, check your iPhone settings - Settings/Apple ID/iCloud - DarknessBot and iCloudDrive toggles should be on. If it’s ok, trying this (better doing it on desktop or tablet): 1. Go to website https://www.icloud.com/settings/ 2. Login with your iCloud email and pass. 3. Look up for "Advanced" section 4. Go to "Manage Apps That Can Look You Up" 5. Switch on DarknessBot app toggle Edited January 23, 2020 by Ilya Shkolnik Quote Link to comment Share on other sites More sharing options...
Alla Shkolnik Posted January 23, 2020 Share Posted January 23, 2020 4 hours ago, Aleksander Prugar said: How to check this BLE? It does not sounds familiar to me. It should be in Ninebot or Xiaomi app. Quote Link to comment Share on other sites More sharing options...
Alla Shkolnik Posted January 23, 2020 Share Posted January 23, 2020 14 hours ago, Greg Goodwin said: Hey!! I am looking to create same type of app for renting out for dcscooter.com and really just want Bluetooth lock functionality. Can we talk? Thanks so much! I sent you DM just now. Quote Link to comment Share on other sites More sharing options...
MexicanBatman Posted January 24, 2020 Share Posted January 24, 2020 Can confirm on latest beta new features work Gotway MSX and Mten3 speed change and riding mode change and calibration all tested and working managed to hit 56km/h on the MSX With tilt back still on chickened out when the wheel double beeped, never heard that before and it wasn’t the 80% alarm had the max speed set to 55km/h in the DB app only thing I’ve noticed is remaining battery percentage calculation may have changed? Quote Link to comment Share on other sites More sharing options...
BarrettJ Posted January 24, 2020 Share Posted January 24, 2020 On 8/4/2019 at 11:59 AM, Ilya Shkolnik said: AW locks automatically by security reason if not detects your hand. I disable "wrist detection" before my rides, and then I don't need the pin code for the duration of my ride (with my watch attached to my wrist guard) 1 Quote Link to comment Share on other sites More sharing options...
RayBanMonster Posted January 24, 2020 Share Posted January 24, 2020 (edited) On 1/22/2020 at 6:12 PM, Ilya Shkolnik said: DarknessBot 5.6 already in the App Store! - KingSong/Gotway: Added calibration - Added Video Recorder settings and Vufine Wearable Display support (Thanks to Isaiah Coberly) - KingSong: Added 18LH support - Gotway: Added Beep tile - KingSong/Gotway: Changed battery level calculation - KingSong: Changed firmware version format - Gotway: Fixed changing max speed - Gotway: Fixed connection to new batch - KingSong: Fixed reading serial number Please note My Gotway 1245 100v is now connecting (thnk you) but showing Voltage as 67v.( this is a 100v wheel). Any ideas ? ------------------------------------------- Update received response via email: Hello, Paul! Please, set voltage in app settings at 100v. In DarknessBot -> Settings/Device/Voltage You should be connecting to msx while doing it. Best regards, Alla Shkolnik DarknessBot design & tech support ------------------------------------------------- Thank you guys Edited January 24, 2020 by RayBanMonster update Quote Link to comment Share on other sites More sharing options...
Alla Shkolnik Posted January 24, 2020 Share Posted January 24, 2020 @Trevor Phillips, thank you for test! Yes, you're right, we've changed battery percentage calculation.How do you think, has it gotten better?@RayBanMonster, oh, you're welcome Quote Link to comment Share on other sites More sharing options...
Ilya Shkolnik Posted January 24, 2020 Author Share Posted January 24, 2020 (edited) Welcome to Public Beta! DarknessBot beta test now is public! Please turn on options in iOS Settings / Privacy / Analytics / Share iPhone & Watch Analytics and Share With App Developers. This will greatly help the development process to identify crashes and other problems! Edited January 24, 2020 by Ilya Shkolnik Quote Link to comment Share on other sites More sharing options...
Ilya Shkolnik Posted January 24, 2020 Author Share Posted January 24, 2020 What's new in beta 5.7-254: - Added support Inmotion V8F and Solowheel Glide 3 @genesisx2, thank you for logs! Can you check it? Get public beta version, please. 1 Quote Link to comment Share on other sites More sharing options...
MexicanBatman Posted January 24, 2020 Share Posted January 24, 2020 2 hours ago, december11 said: @Trevor Phillips, thank you for test! Yes, you're right, we've changed battery percentage calculation.How do you think, has it gotten better?@RayBanMonster, oh, you're welcome To be honest all I know is its changed ill have a closer look and think about it next ride to be honest I’d rather the percentage be a little pessimistic by a couple of percent rather than the other way around i understand Gotway report battery voltage differently what would be great is a device that plugs into the charging port that is a battery voltage display, surely that would be quite easy to make... Quote Link to comment Share on other sites More sharing options...
Salem Posted January 27, 2020 Share Posted January 27, 2020 How do you allow the app to look me up by email in iCloud because I tried everything and it’s not showing Quote Link to comment Share on other sites More sharing options...
Alla Shkolnik Posted January 28, 2020 Share Posted January 28, 2020 @Salem Firstly, check your iPhone settings - Settings/Apple ID/iCloud - DarknessBot and iCloudDrive toggles should be on. If it’s ok, trying this (better doing it on desktop or tablet): 1. Go to website https://www.icloud.com/settings/ 2. Login with your iCloud email and pass. 3. Look up for "Advanced" section 4. Go to "Manage Apps That Can Look You Up" 5. Switch on DarknessBot app toggle 1 Quote Link to comment Share on other sites More sharing options...
Mabaelst Posted January 29, 2020 Share Posted January 29, 2020 Hey, I am new here. the darkness bot app also works with the segway ninebot kick scooter max G30 or not? thanks for your response Quote Link to comment Share on other sites More sharing options...
Alla Shkolnik Posted January 29, 2020 Share Posted January 29, 2020 @Mabaelst, at this moment - no. It has strong data encryption, we can’t get over it now. P.S. please, don’t use huge font🙂 Quote Link to comment Share on other sites More sharing options...
Tegulf Posted January 29, 2020 Share Posted January 29, 2020 Hello. Do you support the kingsong ks-x1 kickscooter? There is a speedlimit on mine id like to remove. Bought wrong version. The one with 20km/h limit :/ Quote Link to comment Share on other sites More sharing options...
Alla Shkolnik Posted January 29, 2020 Share Posted January 29, 2020 On 1/25/2020 at 1:47 AM, Trevor Phillips said: what would be great is a device that plugs into the charging port that is a battery voltage display, surely that would be quite easy to make... Sorry, I missing your message. About it. Couple days ago we have bought Satechi smart plug for Apple Home. (Mostly for trying Apple Home and playing with smart plugs😁) Whatever, if you know any popular plugs, I think we could add supporting for it. We just switching off plugs on timer now, but in free time we’ll add ability to switch off plugs when EUC voltage is near 100% we can get this info from DB. Functionality depends of plugs but we could add such functions as charging until custom user voltage level, full-charge notification, auto-switching off plugs and many other things, what we can imagine. What do you thing about it, guys?😀 Quote Link to comment Share on other sites More sharing options...
Alla Shkolnik Posted January 29, 2020 Share Posted January 29, 2020 14 minutes ago, Tegulf said: Hello. Do you support the kingsong ks-x1 kickscooter? There is a speedlimit on mine id like to remove. Bought wrong version. The one with 20km/h limit :/ I don’t sure we have tested it with this model. The app is free, you can just download it from App Store and try it🙂 Speed settings is free. Paid features don’t provide better connection or more metrics, and don’t cut off maximum speed meaning. So, don’t bought to get it. Wrong version.... Do you mean Chinese (domestic region) version? Quote Link to comment Share on other sites More sharing options...
Tegulf Posted January 30, 2020 Share Posted January 30, 2020 Any support for android? Only ios device i have is ipad 3. But its only ios9 and cant upgrade. Darknessbot requires ios 10 Quote Link to comment Share on other sites More sharing options...
Alla Shkolnik Posted January 30, 2020 Share Posted January 30, 2020 2 hours ago, Tegulf said: Any support for android? Only ios device i have is ipad 3. But its only ios9 and cant upgrade. Darknessbot requires ios 10 No, we haven’t android version. iOS exclusive. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.