Jump to content

Recommended Posts

On 5.10.2017 at 11:50 AM, Ilya Shkolnik said:

@KingSong69 In version 3.0-115 this bug appears? If yes, you can clean cache

Hy Ilya,

first the good news:

Very good job on the ‚sleep mode“...working fine!

 

Bad news...

I am. driving with my Ks18s 67 volt....it actually on this ride had about 56Volt...40% battery...that is what Darkness is doing with that:

(latest version, clean cache, restarted...etc etc)

HUxYLvr.png

When i started the ride....everything was correct! But after the first braking voltage AND percentage goes nutz....and through the roof....after some minutes both try to go back to normal...but after  one braking again: All defect again

(voltage had worked 2 testflight versions before, so you have made it worse...)

And NO, i never ever owned a 84 Volt wheel....so that can not be the case.

Thanks for your effort to repair it :-)

Link to comment
Share on other sites

DarknessBot 3.0 in the Appstore!

What's new:

◉ World ratings by mileage! Now you can compete with other riders in the rankings for the month, week or day among all devices or only your model
◉ Support for Ninebot Mini and Mini Pro with the ability to change settings
◉ Now for some quick settings there are separate tiles on the dashboard and Apple Watch
◉ Ability to change settings for Gotway and Ninebot A1/S2
◉ Added horn for KingSong and Inmotion
◉ iOS 11 Support and iPhone X
◉ Improved Apple Watch app - added Force Touch menu

Link to comment
Share on other sites

19 minutes ago, Ilya Shkolnik said:

@KingSong69 I don't see a problem here. 56V - 37%, 65.65V - 98%. I set 100% for 66V and 0% for 50V (3.1V on battery cell)

What do you mean? Sorry, i think you missunderstood!

My REAL VOLTAGE And percentage when driving was 56volt and about 40%....my wheel was very low batterie....(have 2 or 4 of 10leds on wheel)

but YOUR app showed 66volt (or much higher) and all time 90-100%.....

 

Sorry, but totally off the record...has nothing to do with the real values...

 

Again:

when i start driving...for 5-10 seconds everything is correct! But when i just do a little bit braking...voltage and percentage jump to the highest possible values....And then STAY there....

So voltage and battery percentage is not usable at all!

Link to comment
Share on other sites

1 minute ago, Ilya Shkolnik said:

@KingSong69 , ok, I understood. I think bug on calculating average voltage. I'll try to fix this in next version.

Maybe a misplaced comment/suggestion, but Ilya, could you possibly add an audible sound through my headphones when I hit my dangerous speed warning (all warnings optional, I suppose)?

Link to comment
Share on other sites

9 minutes ago, Ilya Shkolnik said:

@KingSong69 , ok, I understood. I think bug on calculating average voltage. I'll try to fix this in next version.

Thank you!

you are doing a fantastic job!

Its just on the battery percentage and voltage you are doing much to much assumptions and calculations :-)

btw: Voltage has worked until 2 or 3 beta versions earlier...just got bad in the last versions....

Link to comment
Share on other sites

On 11.10.2017 at 9:00 PM, Ilya Shkolnik said:

What's news in beta 3.1-123:
- Added support Xiaomi Mi Scooter
- Added ReviewKit
- Changed runtime format on Dashboard
- KingSong, Gotway: Changed algorithm for voltage
- Improved UI

Hy Ilya,

i tested 3.1 123 today...with my Ks18s!!!

Finally: voltage and percentage are working and showing the correct values. Good Job!

But: Please, please, make the percentage more agile/reactive, as i can not see/experience voltagedrop on heavy accelerations anymore.

I guess most people like to see that, and not an -average calculated value!

 

Then two more faults i found:

Ampere and wattage does not show negative values when braking/recuperating. All my other apps cam do that...

 

Then: Since this 123 version, if you close darkness app when its working fine......after open darkness again, it looks like this:

vaI06H6.png

 

The connect works...but no values are shown. Even if restart app ....it find wheel and connect s, but shows no values!

Only Solution: connect to other app(ks for example) disconnet other app, then open darkness and THEN it works fine again...

 

This was not on older version, this behaviour is new!

 

 

Keep on the good work!!

Best All Wheel app!

 

  • Like 1
Link to comment
Share on other sites

3 hours ago, Ilya Shkolnik said:

What's news in 3.1-131:
- Added support for Inmotion L8 with settings for torch, lights, lock and max Speed

 

Your app gets Multi useable :-)

@Ilya Shkolnik

Are there chances, that the faults i mentioned earlier, will you try to solve them?

I mean for KS:

- negative amps and watt on braking and recuperating...

- Batterie percentage a bit more agile and reactive, so that i can see the voltdrop Happening?

 

my wishlist:

- beeing able to lock the app to landscape mode...(when locking always jumps to Portrait mode)

 

I also wrote on the Facebook Group...but seams you have not confirmed Messages till now.

 

I also would like to help translating to german...but: When you want to Change the shown "phrases" on the right side to "english->"....nothing is shown...

 

 

 

Link to comment
Share on other sites

On 14.10.2017 at 6:14 PM, KingSong69 said:

Even if restart app ....it find wheel and connect s, but shows no values!

Need more steps to reproduce.

18 hours ago, KingSong69 said:

Batterie percentage a bit more agile and reactive, so that i can see the voltdrop Happening

I think that battery level must be stable and persistent

18 hours ago, KingSong69 said:

beeing able to lock the app to landscape mode...(when locking always jumps to Portrait mode)

Hm, this option on app settings not working? What is iOS version?

 

Thanks for feedbacks!

Edited by Ilya Shkolnik
Link to comment
Share on other sites

  • 2 weeks later...

What's news in 3.1-138:
- Neural Network: improved algorithm
- Inmotion V8: fixed changing lights
- Inmotion L8: fixed total mileage
- Fixed single mileage displaying

What's news in 3.1-137:
- Inmotion: Fixed total mileage

What's news in 3.1-136:
- iOS 10 Support

What's news in 3.1-135:
- Xiaomi Mi Scooter: added lock setting
- KingSong: fixed total mileage and current
- Inmotion: fixed disconnects

Link to comment
Share on other sites

Hy Ilya, @Ilya Shkolnik

 

i am owner of a GW Tesla now...

In a short test i found the following faults:

Voltage is not displayed correctly...it is always at about 60Volt, when it should Show wide over 70V.....(does any 84Volt wheel work?).

The battery percentage seams to work correct.....

 

Then the amperage and Watts are way to high!!! I would guess they are about 2x or 3x to high than the real numbers.

Also amperage is showing minus values when accelerating...and plus values when braking :-)

Other than that...works fine

Edited by KingSong69
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...