Paco Gorina Posted February 5, 2017 Author Share Posted February 5, 2017 Will look at it Quote Link to comment Share on other sites More sharing options...
Gil Posted February 8, 2017 Share Posted February 8, 2017 Gyrometrics and gnuplot can be combined. You send the 9bz file to a PC, then use gnuplot to create graphs like this one : Et voilà. You need also the enclosed gnuplot script. V8-V4.05.dem 1 Quote Link to comment Share on other sites More sharing options...
Mono Posted February 8, 2017 Share Posted February 8, 2017 Why do we see these plateaus in the voltage graph? It almost seems like it is sampled with a much coarser frequency. Quote Link to comment Share on other sites More sharing options...
Chriull Posted February 9, 2017 Share Posted February 9, 2017 On 8.2.2017 at 4:40 PM, Mono said: Why do we see these plateaus in the voltage graph? It almost seems like it is sampled with a much coarser frequency. Some wheels as the ninebot e+ send the voltage values unfortunately with a much lower sample frequency 1 Quote Link to comment Share on other sites More sharing options...
Gil Posted February 9, 2017 Share Posted February 9, 2017 (edited) Hi @Chriull, I am sure you will recognise your script... Edited February 9, 2017 by Gil Quote Link to comment Share on other sites More sharing options...
Popular Post Paco Gorina Posted February 13, 2017 Author Popular Post Share Posted February 13, 2017 New Gyrometrics 3.0 is in Review in AppStore. I had to add Speech so they allow background vibration and speech. If you don't like it just disconnect the speech in the settings dialog. Hope this time goes through review without problems. 5 Quote Link to comment Share on other sites More sharing options...
Popular Post Paco Gorina Posted February 15, 2017 Author Popular Post Share Posted February 15, 2017 Finally aproved and with all the bells and whistles. Gyrometrics 3.0 with support for Ninebot E, InMotion, Gotway, KingSong and Rockwheel, autocalibration with GPS, multi wheel library, speed and battery alarms, and many many bugs fixed available. 4 Quote Link to comment Share on other sites More sharing options...
US69 Posted February 15, 2017 Share Posted February 15, 2017 1 hour ago, Paco Gorina said: Finally aproved and with all the bells and whistles. Gyrometrics 3.0 with support for Ninebot E, InMotion, Gotway, KingSong and Rockwheel, autocalibration with GPS, multi wheel library, speed and battery alarms, and many many bugs fixed available. Just Got it from the app store and made a short "speach test".... This "mechanic" voice.....so funny!!! "You are going to fast, please reduce your Speed" As i just have a iphone6plus without taptic Engine and so not that strong vibration, i find speach not that bad as i perhaps hear that speach now..... I Would prefer a shorter -repeated- sentence, just like "slow down"...or "Attention" or "Danger"....but thats just nitpicking ;-) As allways: Really fantastic Work! A thousand Thanks!!! 1 Quote Link to comment Share on other sites More sharing options...
iMaster Posted February 15, 2017 Share Posted February 15, 2017 8 hours ago, Paco Gorina said: Finally aproved and with all the bells and whistles. Gyrometrics 3.0 with support for Ninebot E, InMotion, Gotway, KingSong and Rockwheel, autocalibration with GPS, multi wheel library, speed and battery alarms, and many many bugs fixed available. Really appreciate your great works all the time, all features are working well. ?????????????????? Quote Link to comment Share on other sites More sharing options...
Mougna Posted February 15, 2017 Share Posted February 15, 2017 Hello @Paco Gorina, Is you app compatible with a ninebot one S2 ? I'm not able to connect it, maybe I'm doing something wrong... Quote Link to comment Share on other sites More sharing options...
Noillek Posted February 15, 2017 Share Posted February 15, 2017 13 hours ago, Paco Gorina said: Finally aproved and with all the bells and whistles. Gyrometrics 3.0 with support for Ninebot E, InMotion, Gotway, KingSong and Rockwheel, autocalibration with GPS, multi wheel library, speed and battery alarms, and many many bugs fixed available. Gracias Paco, First ride with V8 and Gyrometrics v3 and works like a charme, IOS and Apple Watch show correct speed, distance, temperature and Battery. mil gracias Paco me compre un Apple Watch de tercera mano para poder usar tu App 1 Quote Link to comment Share on other sites More sharing options...
Paco Gorina Posted February 16, 2017 Author Share Posted February 16, 2017 14 hours ago, Mougna said: Hello @Paco Gorina, Is you app compatible with a ninebot one S2 ? I'm not able to connect it, maybe I'm doing something wrong... Not now working on it 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Paco Gorina Posted February 23, 2017 Author Popular Post Share Posted February 23, 2017 Now in the works in Gyrometrics : New map Dashboard. See where you are going More languages Ninebot S1/A1/A2/Mini? Continue to better calibrate wheels And a very interesting project for travelers (I need help from everybody) A Screen that shows the local normative / uses Probably a Gyrometrics Pro Fork (sorry, routing maps must be payed, trying to understand the cost) Maps with Bycicle Lanes!!! Finding places (by name, address...) Automatic routing and driving instructions in the same dashboard So no more changing from GoogleMaps / Apple Maps to Gyrometrics. 1 6 Quote Link to comment Share on other sites More sharing options...
US69 Posted February 23, 2017 Share Posted February 23, 2017 53 minutes ago, Paco Gorina said: Now in the works in Gyrometrics : New map Dashboard. See where you are going More languages Ninebot S1/A1/A2/Mini? Continue to better calibrate wheels And a very interesting project for travelers (I need help from everybody) A Screen that shows the local normative / uses Probably a Gyrometrics Pro Fork (sorry, routing maps must be payed, trying to understand the cost) Maps with Bycicle Lanes!!! Finding places (by name, address...) Automatic routing and driving instructions in the same dashboard So no more changing from GoogleMaps / Apple Maps to Gyrometrics. Appreciate your fine work for the community!!! Is it possible to get the speach text to a bit smaller sentence? Like just "Slow down" or "Attention" or "Decelerate"? I think that would be not such a big Change, or? btw.: Some fault Report: -Still having a hard time connecting/changing my wheels GW V3 and KS18...often just works when Using the "Server debug mode"... Otherwise no Connection possible...no wheel found... And: The wheels are not remembered in the wheels selection list(Settings) and every time i have to Change the Speed warning Setting(kmh) from new! 1 Quote Link to comment Share on other sites More sharing options...
Paco Gorina Posted February 24, 2017 Author Share Posted February 24, 2017 On 23/2/2017 at 6:52 PM, KingSong69 said: Appreciate your fine work for the community!!! Is it possible to get the speach text to a bit smaller sentence? Like just "Slow down" or "Attention" or "Decelerate"? I think that would be not such a big Change, or? btw.: Some fault Report: -Still having a hard time connecting/changing my wheels GW V3 and KS18...often just works when Using the "Server debug mode"... Otherwise no Connection possible...no wheel found... And: The wheels are not remembered in the wheels selection list(Settings) and every time i have to Change the Speed warning Setting(kmh) from new! Will look at it Quote Link to comment Share on other sites More sharing options...
Paco Gorina Posted March 2, 2017 Author Share Posted March 2, 2017 On 24/2/2017 at 8:35 PM, Paco Gorina said: -Still having a hard time connecting/changing my wheels GW V3 and KS18...often just works when Using the "Server debug mode"... I have tested connections with Gotway ad a KS 16 and have no problems. Please : Go to Settings (sprocket in bottom left of main screen) Select Settings/Adjustmets Select "Clear Bluetooth UUID" Now the name and UUID should disappear Go back and try the connection. It will be recorded when the central square button stops turning. If it doesn't stop there is some problem with the protocol of V3 and KS18 that I must look at. Then when you do a new connection it will connect to your last wheel (if there is just one). To add another do the same again. From now on there will be a menu to select or add new wheels when connecting. 1 Quote Link to comment Share on other sites More sharing options...
Noillek Posted April 5, 2017 Share Posted April 5, 2017 Hi Paco, I saw in the website that I can export the tracks in .gpx, no matter what I do I cannot find that option. Could you explain me how to do it? Thank you Quote Link to comment Share on other sites More sharing options...
Noillek Posted April 6, 2017 Share Posted April 6, 2017 Hi @Paco Gorina me again, Just got a new GW Msuper V3S+ and i'm comparing information vs my Inmotion V8. Found a few differences see pictures below. In the Gotway Temperature and Voltage is off (this last one because my version is the 80V version). Let me know if i send you the *.9bz files from the gotway will help. Thank you once again you do an great service to this community. Have you been able to run any reports around the usage of the wheels and crash rates, kilometers runned, users per location... be aware that EU is working on a new PLEV regularization all the data that you have could make a use impact on the decisions as it is fact based, and one of the few sources. 1 Quote Link to comment Share on other sites More sharing options...
Noillek Posted April 6, 2017 Share Posted April 6, 2017 On 2/8/2017 at 9:53 PM, Gil said: Gyrometrics and gnuplot can be combined. You send the 9bz file to a PC, then use gnuplot to create graphs like this one : Et voilà. You need also the enclosed gnuplot script. V8-V4.05.dem @Gil, Can you explain to a 4 year old, how to get to see the information like you did step by step? I'm looking to analyze my logged data. Downloaded lates version of GNUPLOT but still can see the file content when opening the *.9bz file. Thank you Quote Link to comment Share on other sites More sharing options...
Paco Gorina Posted April 6, 2017 Author Share Posted April 6, 2017 36 minutes ago, Noillek said: Hi @Paco Gorina me again, Just got a new GW Msuper V3S+ and i'm comparing information vs my Inmotion V8. Found a few differences see pictures below. In the Gotway Temperature and Voltage is off (this last one because my version is the 80V version). Let me know if i send you the *.9bz files from the gotway will help. Thank you once again you do an great service to this community. Have you been able to run any reports around the usage of the wheels and crash rates, kilometers runned, users per location... be aware that EU is working on a new PLEV regularization all the data that you have could make a use impact on the decisions as it is fact based, and one of the few sources. 1.- Gotway voltage is reported as you see, it is not a Gyrometrics compoutation but just the value sent from the Gotway. Only way to solve should be to scale the wheel value entering a manual coeficient for each wheel as I don't know if it is or not a 80v wheel, 2.- Temperature problem is corrected i next version (now in review for Apple Store) 3.- Current in Gotway and Kingsong will come with absolute values as sign meaning changes from wheel to wheel 4.- InMotion, as far as now I don't know how to get the temperature. I see that all the values in the InMotion are 0 which is not normal (current, speed). If they arre not ok, please send the .9bz to see which data are being recorded. With InMotion IT IS VERY IMPORTANT TO SET THE PASSWORD IN THE SETTINGS. Default password is '000000'. If not i connects and disconnects abitrarily, Regarding the analysis I have not been able to do analysis except with my own records as all data is private. perhaps a repository where we coould upload anonymized data would be a very good idea. I once dit a detailed analysis of a crash. It was the result of a series of breaking tests and showed quite strange behaviour of currents. Discusion is in the forum. Also did some amalysis of braking capabilities which are similar to those of a bike. Mainly because we are talking to Barcelona administration about setting the normative for unicycles. Here is the breaking crash thread And enclosed a fast translation of a document about security we did for Barcelona officers. security.docx 3 Quote Link to comment Share on other sites More sharing options...
Noillek Posted April 6, 2017 Share Posted April 6, 2017 1 hour ago, Paco Gorina said: 1.- Gotway voltage is reported as you see, it is not a Gyrometrics compoutation but just the value sent from the Gotway. Only way to solve should be to scale the wheel value entering a manual coeficient for each wheel as I don't know if it is or not a 80v wheel, 2.- Temperature problem is corrected i next version (now in review for Apple Store) 3.- Current in Gotway and Kingsong will come with absolute values as sign meaning changes from wheel to wheel 4.- InMotion, as far as now I don't know how to get the temperature. I see that all the values in the InMotion are 0 which is not normal (current, speed). If they arre not ok, please send the .9bz to see which data are being recorded. With InMotion IT IS VERY IMPORTANT TO SET THE PASSWORD IN THE SETTINGS. Default password is '000000'. If not i connects and disconnects abitrarily, Regarding the analysis I have not been able to do analysis except with my own records as all data is private. perhaps a repository where we coould upload anonymized data would be a very good idea. I once dit a detailed analysis of a crash. It was the result of a series of breaking tests and showed quite strange behaviour of currents. Discusion is in the forum. Also did some amalysis of braking capabilities which are similar to those of a bike. Mainly because we are talking to Barcelona administration about setting the normative for unicycles. Here is the breaking crash thread And enclosed a fast translation of a document about security we did for Barcelona officers. security.docx Thank you, very much on explanations about the data confidentiality just add in the app a yes/no if users would be willing to share anonymous details, for statistical purposes. I'm sure if people knows for what is the purpose and receive as as well reports of the data collected you would reach a massive amount of people interested to know. I really admire your work, would love to know more about the app and the information that you can collect and what to do with it. Maybe im nostalgic and missing my analyst days P.S. - Is there a way to get the tracks out of the application? (*.gpx file or other) Quote Link to comment Share on other sites More sharing options...
US69 Posted April 19, 2017 Share Posted April 19, 2017 @Paco Gorina I have installed your latest update of the app.... Good news: Temperature Bug on GW is fixed Bad news: The amperage/Watts of Kingsong is defect now! I am not able to get displayed more than 1 Amp and about 10Watt :-) Thats a bit low :-) Gotway is Ok! 1 Quote Link to comment Share on other sites More sharing options...
Chriull Posted July 20, 2017 Share Posted July 20, 2017 On 19.4.2017 at 9:04 AM, KingSong69 said: @Paco Gorina I have installed your latest update of the app.... Good news: Temperature Bug on GW is fixed Bad news: The amperage/Watts of Kingsong is defect now! I am not able to get displayed more than 1 Amp and about 10Watt :-) Thats a bit low :-) Gotway is Ok! Just noticed this shortly - i'm a slow updater... . It's a simple "double division by 100" which happened to @Paco Gorina... just opened him an issue on github. unfortionately he inhibits negative currents for Kingsong - seems that i have to power up my mac and try an own version once i get my Ks16s. I absolutely want and "need" the signed values! Regarding power: All apps show invalid numbers as power: the wheels send motor current and battery voltage, so the power values are always too high. By this the energy numbers are invalid too... 1 Quote Link to comment Share on other sites More sharing options...
Chriull Posted July 22, 2017 Share Posted July 22, 2017 On 20.7.2017 at 1:25 PM, Chriull said: unfortionately he inhibits negative currents for Kingsong - seems that i have to power up my mac and try an own version once i get my Ks16s. I absolutely want and "need" the signed values! Fortionately he had a mishap - negative currents are still available for the KS16S log It's now just a If (Current>3,2768) then Current = (current-6,5536)*100 else Current = Current*100 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Paco Gorina Posted November 4, 2017 Author Popular Post Share Posted November 4, 2017 Well it has been a long time, too much work, studying a self driving car Udacity nanodegree and Catalonia politics have limited my availability. But at last it is a new Gyrometrics version : - some bug fixes - Integrated MAP dashboard accesible from the other ones with your track clearly visible. - Siri support. Start recording with a start workout with Gyrometrics or stop it with stop workout or with the wheel connected or disconnected ask your car fuel. Or charge level Gyrometrics stores last battery reading . Also it works now with Rockwheel GT16. Hope you enjoy it. 4 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.