Coxeros Posted June 9, 2015 Share Posted June 9, 2015 Hi!Rode my GR16 yesterday and at the end of the run it started tilting backwards and forwards. It´s like it´s trying to find the correct level but misses every time, going back and forward. Kind of scary feeling.Anyone got any suggestions on what could be wrong?//GR16 Link to comment Share on other sites More sharing options...
EUC Extreme Posted June 9, 2015 Share Posted June 9, 2015 https://www.ifixit.com/Guide/Fixing+Rockwheel+Electric+Unicycle+Balance+Issues/28300 Hope this help Link to comment Share on other sites More sharing options...
Sunny Rockwheel Posted June 12, 2015 Share Posted June 12, 2015 you can send me message to see if I can help Link to comment Share on other sites More sharing options...
WaveCut Posted July 22, 2015 Share Posted July 22, 2015 I got that behaviour after my RW GR16 laid down on the side nearly about a month being repaired. Self resolvedafter a couple of minutes. Made me sweat a little. Link to comment Share on other sites More sharing options...
John Eucist Posted July 23, 2015 Share Posted July 23, 2015 This phenomenon happens to every geared Rockwheel (when I used to ride them) without fail after a few months. I refer to it as "stuttering". Not sure if they finally resolved the issue with newer units. They say it has something to do with a loose nut. Link to comment Share on other sites More sharing options...
Speedy Posted August 26, 2015 Share Posted August 26, 2015 I guess your problem is that the nuts on the axle of your motor are loose. Because of the geared motor on the GR16, it has more torque than usual.Even on direct drive unicycle, there´s nothing new that the axle nuts come loose from vibration and torque. This will make the wheel feel clunky, and give balance issues, as the axle will be cluncking/rocking backward and forward in the groove of the foot rest supports.I recommend you check this, and apply some loctite when tightening the nuts to avoid them coming loose again Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.