daveola Posted June 6 Posted June 6 My Mten3 has started to vibrate heavily at very low speeds, but otherwise basically works. Video attached. I also saw this in the forum but couldn't tell if it was similar after watching the video, and there were no responses... Quote
alcatraz Posted June 7 Posted June 7 Can you get it to shake when just pushing it by hand? Buzzing seems to be accepted, but when we're talking "shaking violently" then it's usually the board or shell screws not being tight enough to cause the board to flop back/forward in relation to the motor. When the motor is still, the shell must have zero flop back/forward or it'll confuse the gyro (balancing). Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.