glazkovigor Posted May 26 Posted May 26 My board failed after the cover accidentally pinched the wire from the power button and short-circuited this wire to the case. After this, the processor input to which the button was connected failed and some data in the processor’s flash memory was damaged. The firmware from the damaged processor has been unloaded and loaded into the new processor. The processor turns on, but due to problems with some data in the memory, the controller is constantly in firmware mode 00. You need a dump from a working processor (which turns on). Maybe someone has it? Please share. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.